| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20160623023756.GA30438@js1304-P5Q-DELUXE>
Date: Thu, 23 Jun 2016 11:37:56 +0900
From: Joonsoo Kim <iamjoonsoo.kim@....com>
To: "Paul E. McKenney" <paulmck@...ux.vnet.ibm.com>
Cc: Geert Uytterhoeven <geert@...ux-m68k.org>,
Andrew Morton <akpm@...ux-foundation.org>,
Christoph Lameter <cl@...ux.com>,
Pekka Enberg <penberg@...nel.org>,
David Rientjes <rientjes@...gle.com>,
Jesper Dangaard Brouer <brouer@...hat.com>,
Linux MM <linux-mm@...ck.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
linux-renesas-soc@...r.kernel.org,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>
Subject: Re: Boot failure on emev2/kzm9d (was: Re: [PATCH v2 11/11] mm/slab:
lockless decision to grow cache)
On Wed, Jun 22, 2016 at 05:49:35PM -0700, Paul E. McKenney wrote:
> On Wed, Jun 22, 2016 at 12:08:59PM -0700, Paul E. McKenney wrote:
> > On Wed, Jun 22, 2016 at 05:01:35PM +0200, Geert Uytterhoeven wrote:
> > > On Wed, Jun 22, 2016 at 2:52 AM, Joonsoo Kim <iamjoonsoo.kim@....com> wrote:
> > > > Could you try below patch to check who causes the hang?
> > > >
> > > > And, if sysalt-t works when hang, could you get sysalt-t output? I haven't
> > > > used it before but Paul could find some culprit on it. :)
> > > >
> > > > Thanks.
> > > >
> > > >
> > > > ----->8-----
> > > > diff --git a/mm/slab.c b/mm/slab.c
> > > > index 763096a..9652d38 100644
> > > > --- a/mm/slab.c
> > > > +++ b/mm/slab.c
> > > > @@ -964,8 +964,13 @@ static int setup_kmem_cache_node(struct kmem_cache *cachep,
> > > > * guaranteed to be valid until irq is re-enabled, because it will be
> > > > * freed after synchronize_sched().
> > > > */
> > > > - if (force_change)
> > > > + if (force_change) {
> > > > + if (num_online_cpus() > 1)
> > > > + dump_stack();
> > > > synchronize_sched();
> > > > + if (num_online_cpus() > 1)
> > > > + dump_stack();
> > > > + }
> > >
> > > I've only added the first one, as I would never see the second one. All of
> > > this happens before the serial console is activated, earlycon is not supported,
> > > and I only have remote access.
> > >
> > > Brought up 2 CPUs
> > > SMP: Total of 2 processors activated (2132.00 BogoMIPS).
> > > CPU: All CPU(s) started in SVC mode.
> > > CPU: 0 PID: 1 Comm: swapper/0 Not tainted
> > > 4.7.0-rc4-kzm9d-00404-g4a235e6dde4404dd-dirty #89
> > > Hardware name: Generic Emma Mobile EV2 (Flattened Device Tree)
> > > [<c010de68>] (unwind_backtrace) from [<c010a658>] (show_stack+0x10/0x14)
> > > [<c010a658>] (show_stack) from [<c02b5cf8>] (dump_stack+0x7c/0x9c)
> > > [<c02b5cf8>] (dump_stack) from [<c01cfa4c>] (setup_kmem_cache_node+0x140/0x170)
> > > [<c01cfa4c>] (setup_kmem_cache_node) from [<c01cfe3c>]
> > > (__do_tune_cpucache+0xf4/0x114)
> > > [<c01cfe3c>] (__do_tune_cpucache) from [<c01cff54>] (enable_cpucache+0xf8/0x148)
> > > [<c01cff54>] (enable_cpucache) from [<c01d0190>]
> > > (__kmem_cache_create+0x1a8/0x1d0)
> > > [<c01d0190>] (__kmem_cache_create) from [<c01b32d0>]
> > > (kmem_cache_create+0xbc/0x190)
> > > [<c01b32d0>] (kmem_cache_create) from [<c070d968>] (shmem_init+0x34/0xb0)
> > > [<c070d968>] (shmem_init) from [<c0700cc8>] (kernel_init_freeable+0x98/0x1ec)
> > > [<c0700cc8>] (kernel_init_freeable) from [<c049fdbc>] (kernel_init+0x8/0x110)
> > > [<c049fdbc>] (kernel_init) from [<c0106cb8>] (ret_from_fork+0x14/0x3c)
> > > devtmpfs: initialized
> >
> > I don't see anything here that would prevent grace periods from completing.
> >
> > The CPUs are using the normal hotplug sequence to come online, correct?
>
> And either way, could you please apply the patch below and then
> invoke rcu_dump_rcu_sched_tree() just before the offending call to
> synchronize_sched()? That will tell me what CPUs RCU believes exist,
> and perhaps also which CPU is holding it up.
I can't find rcu_dump_rcu_sched_tree(). Do you mean
rcu_dump_rcu_node_tree()? Anyway, there is no patch below so I attach
one which does what Paul want, maybe.
Thanks.
------->8---------
diff --git a/kernel/rcu/tree.c b/kernel/rcu/tree.c
index 88d3f95..6b650f0 100644
--- a/kernel/rcu/tree.c
+++ b/kernel/rcu/tree.c
@@ -4171,7 +4171,7 @@ static void __init rcu_init_geometry(void)
* Dump out the structure of the rcu_node combining tree associated
* with the rcu_state structure referenced by rsp.
*/
-static void __init rcu_dump_rcu_node_tree(struct rcu_state *rsp)
+static void rcu_dump_rcu_node_tree(struct rcu_state *rsp)
{
int level = 0;
struct rcu_node *rnp;
@@ -4189,6 +4189,11 @@ static void __init rcu_dump_rcu_node_tree(struct rcu_state *rsp)
pr_cont("\n");
}
+void rcu_dump_rcu_sched_tree(void)
+{
+ rcu_dump_rcu_node_tree(&rcu_sched_state);
+}
+
void __init rcu_init(void)
{
int cpu;
diff --git a/mm/slab.c b/mm/slab.c
index 763096a..d88976c 100644
--- a/mm/slab.c
+++ b/mm/slab.c
@@ -909,6 +909,8 @@ static int init_cache_node_node(int node)
return 0;
}
+extern void rcu_dump_rcu_sched_tree(void);
+
static int setup_kmem_cache_node(struct kmem_cache *cachep,
int node, gfp_t gfp, bool force_change)
{
@@ -964,8 +966,10 @@ static int setup_kmem_cache_node(struct kmem_cache *cachep,
* guaranteed to be valid until irq is re-enabled, because it will be
* freed after synchronize_sched().
*/
- if (force_change)
+ if (force_change) {
+ rcu_dump_rcu_sched_tree();
synchronize_sched();
+ }
fail:
kfree(old_shared);
Powered by blists - more mailing lists