Message-ID: <576CCCDE.1050004@rock-chips.com>
Date:	Fri, 24 Jun 2016 14:02:06 +0800
From:	Jeffy Chen <jeffy.chen@...k-chips.com>
To:	Amitkumar Karwar <akarwar@...vell.com>,
	linux-bluetooth@...r.kernel.org
Cc:	linux-kernel@...r.kernel.org, Ganapathi Bhat <gbhat@...vell.com>
Subject: Re: [v11,3/3] Bluetooth: hci_uart: Support firmware download for
 Marvell

On 2016-5-6 23:31, Amitkumar Karwar wrote:
> From: Ganapathi Bhat <gbhat@...vell.com>
>
> This patch implement firmware download feature for
> Marvell Bluetooth devices. If firmware is already
> downloaded, it will skip downloading.
>
> Signed-off-by: Ganapathi Bhat <gbhat@...vell.com>
> Signed-off-by: Amitkumar Karwar <akarwar@...vell.com>
> ---
> v2: Fixed compilation warning reported by kbuild test robot
> v3: Addressed review comments from Marcel Holtmann
>      a) Removed vendor specific code from hci_ldisc.c
>      b) Get rid of static forward declaration
>      c) Removed unnecessary heavy nesting
>      d) Git rid of module parameter and global variables
>      e) Add logic to pick right firmware image
> v4: Addresses review comments from Alan
>      a) Use existing kernel helper APIs instead of writing own.
>      b) Replace mdelay() with msleep()
> v5: Addresses review comments from Loic Poulain
>      a) Use bt_dev_err/warn/dbg helpers insted of BT_ERR/WARN/DBG
>      b) Used static functions where required and removed forward delcarations
>      c) Edited comments for the function hci_uart_recv_data
>      d) Made HCI_UART_DNLD_FW flag a part of driver private data
> v6: Addresses review comments from Loic Poulain
>      a) Used skb instead of array to store firmware data during download
>      b) Used hci_uart_tx_wakeup and enqueued packets instead of tty write
>      c) Used GFP_KERNEL instead of GFP_ATOMIC
> v7: Edited Kconfig to add dependency for BT_HCIUART_H4. The change resolves
>      errors reported by kbuild test robot.
> v8: Addressed review comments from Marcel Holtmann
>      a) Removed unnecessary memory allocation failure messages
>      b) Get rid of btmrvl.h header file and add definitions in hci_mrvl.c file
> v9: Addressed review comments from Marcel Holtmann
>      a) Moved firmware download code from setup to prepare handler.
>      b) Change messages from bt_dev_*->BT_*, as hdev isn't available during firmware
>       download.
> v10: Addressed review comments from Marcel Holtmann
>      a) Added new callback recv_for_prepare to receive data from device
>       during prepare phase
>      b) Avoided using private flags (HCI_UART_DNLD_FW) as new receive callback is
>       added for the same purpose
>      c) Used kernel API to handle unaligned data
>      d) Moved mrvl_set_baud functionality inside setup callback
> v11: Write data through ldisc in mrvl_send_ack() instead of directly calling
>      write method(One Thousand Gnomes).
> ---
>   drivers/bluetooth/Kconfig     |  11 +
>   drivers/bluetooth/Makefile    |   1 +
>   drivers/bluetooth/hci_ldisc.c |   6 +
>   drivers/bluetooth/hci_mrvl.c  | 543 ++++++++++++++++++++++++++++++++++++++++++
>   drivers/bluetooth/hci_uart.h  |   8 +-
>   5 files changed, 568 insertions(+), 1 deletion(-)
>   create mode 100644 drivers/bluetooth/hci_mrvl.c
>
> diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig
> index cf50fd2..daafd0c 100644
> --- a/drivers/bluetooth/Kconfig
> +++ b/drivers/bluetooth/Kconfig
> @@ -180,6 +180,17 @@ config BT_HCIUART_AG6XX
>   
>   	  Say Y here to compile support for Intel AG6XX protocol.
>   
> +config BT_HCIUART_MRVL
> +	bool "Marvell protocol support"
> +	depends on BT_HCIUART
> +	select BT_HCIUART_H4
> +	help
> +	  Marvell is serial protocol for communication between Bluetooth
> +	  device and host. This protocol is required for most Marvell Bluetooth
> +	  devices with UART interface.
> +
> +	  Say Y here to compile support for HCI MRVL protocol.
> +
>   config BT_HCIBCM203X
>   	tristate "HCI BCM203x USB driver"
>   	depends on USB
> diff --git a/drivers/bluetooth/Makefile b/drivers/bluetooth/Makefile
> index 9c18939..364dbb6 100644
> --- a/drivers/bluetooth/Makefile
> +++ b/drivers/bluetooth/Makefile
> @@ -37,6 +37,7 @@ hci_uart-$(CONFIG_BT_HCIUART_INTEL)	+= hci_intel.o
>   hci_uart-$(CONFIG_BT_HCIUART_BCM)	+= hci_bcm.o
>   hci_uart-$(CONFIG_BT_HCIUART_QCA)	+= hci_qca.o
>   hci_uart-$(CONFIG_BT_HCIUART_AG6XX)	+= hci_ag6xx.o
> +hci_uart-$(CONFIG_BT_HCIUART_MRVL)	+= hci_mrvl.o
>   hci_uart-objs				:= $(hci_uart-y)
>   
>   ccflags-y += -D__CHECK_ENDIAN__
> diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c
> index 047e786..4896b6f 100644
> --- a/drivers/bluetooth/hci_ldisc.c
> +++ b/drivers/bluetooth/hci_ldisc.c
> @@ -821,6 +821,9 @@ static int __init hci_uart_init(void)
>   #ifdef CONFIG_BT_HCIUART_AG6XX
>   	ag6xx_init();
>   #endif
> +#ifdef CONFIG_BT_HCIUART_MRVL
> +	mrvl_init();
> +#endif
>   
>   	return 0;
>   }
> @@ -856,6 +859,9 @@ static void __exit hci_uart_exit(void)
>   #ifdef CONFIG_BT_HCIUART_AG6XX
>   	ag6xx_deinit();
>   #endif
> +#ifdef CONFIG_BT_HCIUART_MRVL
> +	mrvl_deinit();
> +#endif
>   
>   	/* Release tty registration of line discipline */
>   	err = tty_unregister_ldisc(N_HCI);
> diff --git a/drivers/bluetooth/hci_mrvl.c b/drivers/bluetooth/hci_mrvl.c
> new file mode 100644
> index 0000000..2686901
> --- /dev/null
> +++ b/drivers/bluetooth/hci_mrvl.c
> @@ -0,0 +1,543 @@
> +/* Bluetooth HCI UART driver for Marvell devices
> + *
> + * Copyright (C) 2016, Marvell International Ltd.
> + *
> + *  Acknowledgements:
> + *  This file is based on hci_h4.c, which was written
> + *  by Maxim Krasnyansky and Marcel Holtmann.
> + *
> + * This software file (the "File") is distributed by Marvell International
> + * Ltd. under the terms of the GNU General Public License Version 2, June 1991
> + * (the "License").  You may use, redistribute and/or modify this File in
> + * accordance with the terms and conditions of the License, a copy of which
> + * is available on the worldwide web at
> + * http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
> + *
> + * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
> + * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
> + * ARE EXPRESSLY DISCLAIMED.  The License provides additional details about
> + * this warranty disclaimer.
> + */
> +
> +#include <linux/firmware.h>
> +#include <linux/tty.h>
> +#include <asm/unaligned.h>
> +#include <net/bluetooth/bluetooth.h>
> +#include <net/bluetooth/hci_core.h>
> +#include "hci_uart.h"
> +
> +struct fw_data {
> +	wait_queue_head_t init_wait_q;
> +	u8 wait_fw;
> +	int next_len;
> +	u8 five_bytes[5];
> +	u8 next_index;
> +	u8 last_ack;
> +	u8 expected_ack;
> +	struct ktermios old_termios;
> +	u8 chip_id;
> +	u8 chip_rev;
> +	struct sk_buff *skb;
> +};
> +
> +#define MRVL_HELPER_NAME	"mrvl/helper_uart_3000000.bin"
> +#define MRVL_8997_CHIP_ID	0x50
> +#define MRVL_8997_FW_NAME	"mrvl/uart8997_bt.bin"
> +#define MRVL_MAX_FW_BLOCK_SIZE	1024
> +#define MRVL_MAX_RETRY_SEND	12
> +#define MRVL_DNLD_DELAY		100
> +#define MRVL_ACK		0x5A
> +#define MRVL_NAK		0xBF
> +#define MRVL_HDR_REQ_FW		0xA5
> +#define MRVL_HDR_CHIP_VER	0xAA
> +#define MRVL_HCI_OP_SET_BAUD	0xFC09
> +#define MRVL_FW_HDR_LEN		5
> +#define MRVL_WAIT_TIMEOUT	msecs_to_jiffies(12000)
> +
> +struct mrvl_data {
> +	struct sk_buff *rx_skb;
> +	struct sk_buff_head txq;
> +	struct fw_data *fwdata;
> +};
> +
> +static int get_cts(struct hci_uart *hu)
> +{
> +	struct tty_struct *tty = hu->tty;
> +	u32 state =  tty->ops->tiocmget(tty);
> +
> +	if (state & TIOCM_CTS) {
> +		bt_dev_dbg(hu->hdev, "CTS is low");
> +		return 1;
> +	}
> +	bt_dev_dbg(hu->hdev, "CTS is high");
> +
> +	return 0;
> +}
> +
> +/* Initialize protocol */
> +static int mrvl_open(struct hci_uart *hu)
> +{
> +	struct mrvl_data *mrvl;
> +
> +	bt_dev_dbg(hu->hdev, "hu %p", hu);
> +
> +	mrvl = kzalloc(sizeof(*mrvl), GFP_KERNEL);
> +	if (!mrvl)
> +		return -ENOMEM;
> +
> +	skb_queue_head_init(&mrvl->txq);
> +	hu->priv = mrvl;
> +
> +	return 0;
> +}
> +
> +/* Flush protocol data */
> +static int mrvl_flush(struct hci_uart *hu)
> +{
> +	struct mrvl_data *mrvl = hu->priv;
> +
> +	bt_dev_dbg(hu->hdev, "hu %p", hu);
> +
> +	skb_queue_purge(&mrvl->txq);
> +
> +	return 0;
> +}
> +
> +/* Close protocol */
> +static int mrvl_close(struct hci_uart *hu)
> +{
> +	struct mrvl_data *mrvl = hu->priv;
> +
> +	bt_dev_dbg(hu->hdev, "hu %p", hu);
> +
> +	skb_queue_purge(&mrvl->txq);
> +	kfree_skb(mrvl->rx_skb);
> +	hu->priv = NULL;
> +	kfree(mrvl);
> +
> +	return 0;
> +}
> +
> +/* Enqueue frame for transmittion (padding, crc, etc) */
> +static int mrvl_enqueue(struct hci_uart *hu, struct sk_buff *skb)
> +{
> +	struct mrvl_data *mrvl = hu->priv;
> +
> +	bt_dev_dbg(hu->hdev, "hu %p skb %p", hu, skb);
> +
> +	/* Prepend skb with frame type */
> +	memcpy(skb_push(skb, 1), &hci_skb_pkt_type(skb), 1);
> +	skb_queue_tail(&mrvl->txq, skb);
> +
> +	return 0;
> +}
> +
> +static const struct h4_recv_pkt mrvl_recv_pkts[] = {
> +	{ H4_RECV_ACL,   .recv = hci_recv_frame },
> +	{ H4_RECV_SCO,   .recv = hci_recv_frame },
> +	{ H4_RECV_EVENT, .recv = hci_recv_frame },
> +};
> +
> +/* Send ACK/NAK to the device */
> +static void mrvl_send_ack(struct hci_uart *hu, unsigned char ack)
> +{
> +	struct mrvl_data *mrvl = hu->priv;
> +	struct sk_buff *skb;
> +
> +	skb = bt_skb_alloc(sizeof(ack), GFP_KERNEL);
> +	if (!skb)
> +		return;
> +
> +	memcpy(skb->data, &ack, sizeof(ack));
> +	skb_put(skb, sizeof(ack));
> +	skb_queue_head(&mrvl->txq, skb);
> +	hci_uart_tx_wakeup(hu);
> +}
> +
> +/* Validate the feedback data from device */
> +static void mrvl_pkt_complete(struct hci_uart *hu, struct sk_buff *skb)
> +{
> +	struct mrvl_data *mrvl = hu->priv;
> +	struct fw_data *fw_data = mrvl->fwdata;
> +	u16 lhs, rhs;
> +
> +	lhs = get_unaligned_le16(skb->data + 1);
> +	rhs = get_unaligned_le16(skb->data + 3);
> +	if ((lhs ^ rhs) == 0xffff) {
> +		mrvl_send_ack(hu, MRVL_ACK);
> +		fw_data->wait_fw = 1;
> +		fw_data->next_len = lhs;
> +		/* Firmware download is done, send the last ack */
> +		if (!lhs)
> +			fw_data->last_ack = 1;
> +
> +		if (fw_data->expected_ack == MRVL_HDR_CHIP_VER) {
> +			fw_data->chip_id = skb->data[1];
> +			fw_data->chip_rev = skb->data[2];
> +		}
> +		wake_up_interruptible(&fw_data->init_wait_q);
> +	} else {
> +		mrvl_send_ack(hu, MRVL_NAK);
> +	}
> +}
> +
> +/* This function receives data from the uart device during firmware download.
> + * Driver expects 5 bytes of data as per the protocal in the below format:
> + * <HEADER><BYTE_1><BYTE_2><BYTE_3><BYTE_4>
> + * BYTE_3 and BYTE_4 are compliment of BYTE_1 an BYTE_2. Data can come in chunks
> + * of any length. If length received is < 5, accumulate the data in an array,
> + * until we have a sequence of 5 bytes, starting with the expected HEADER. If
> + * the length received is > 5  bytes, then get the first 5 bytes, starting with
> + * the HEADER and process the same, ignoring the rest of the bytes as per the
> + * protocal.
> + */
> +static struct sk_buff *mrvl_process_fw_data(struct hci_uart *hu,
> +					    struct sk_buff *skb,
> +					    u8 *buf, int count)
> +{
> +	struct mrvl_data *mrvl = hu->priv;
> +	struct fw_data *fw_data = mrvl->fwdata;
> +	int i = 0, len;
> +
> +	if (!skb) {
> +		while (buf[i] != fw_data->expected_ack && i < count)
> +			i++;
> +		if (i == count)
> +			return ERR_PTR(-EILSEQ);
> +
> +		skb = bt_skb_alloc(MRVL_FW_HDR_LEN, GFP_KERNEL);
> +	}
> +
> +	if (!skb)
> +		return ERR_PTR(-ENOMEM);
> +
> +	len = count - i;
> +	memcpy(skb_put(skb, len), &buf[i], len);
> +
> +	if (skb->len == MRVL_FW_HDR_LEN) {
> +		mrvl_pkt_complete(hu, skb);
> +		kfree_skb(skb);
> +		skb = NULL;
> +	}
> +
> +	return skb;
> +}
> +
> +/* Receive firmware feedback data */
> +static int mrvl_recv_for_prepare(struct hci_uart *hu, const void *data,
> +				 int count)
> +{
> +	struct mrvl_data *mrvl = hu->priv;
> +
> +	mrvl->fwdata->skb = mrvl_process_fw_data(hu, mrvl->fwdata->skb,
> +						 (u8 *)data, count);
> +	if (IS_ERR(mrvl->fwdata->skb)) {
> +		int err = PTR_ERR(mrvl->fwdata->skb);
> +
> +		bt_dev_err(hu->hdev,
> +			   "Receive firmware data failed (%d)", err);
> +		mrvl->fwdata->skb = NULL;
> +		return err;
> +	}
> +
> +	return 0;
> +}
> +
> +/* Receive data */
> +static int mrvl_recv(struct hci_uart *hu, const void *data, int count)
> +{
> +	struct mrvl_data *mrvl = hu->priv;
> +
> +	if (!test_bit(HCI_UART_REGISTERED, &hu->flags))
> +		return -EUNATCH;
> +
> +	mrvl->rx_skb = h4_recv_buf(hu->hdev, mrvl->rx_skb, data, count,
> +				   mrvl_recv_pkts, ARRAY_SIZE(mrvl_recv_pkts));
> +	if (IS_ERR(mrvl->rx_skb)) {
> +		int err = PTR_ERR(mrvl->rx_skb);
> +
> +		bt_dev_err(hu->hdev, "Frame reassembly failed (%d)", err);
> +		mrvl->rx_skb = NULL;
> +		return err;
> +	}
> +
> +	return count;
> +}
> +
> +static struct sk_buff *mrvl_dequeue(struct hci_uart *hu)
> +{
> +	struct mrvl_data *mrvl = hu->priv;
> +
> +	return skb_dequeue(&mrvl->txq);
> +}
> +
> +static int mrvl_init_fw_data(struct hci_uart *hu)
> +{
> +	struct fw_data *fwdata;
> +	struct mrvl_data *mrvl = hu->priv;
> +
> +	fwdata = kzalloc(sizeof(*fwdata), GFP_KERNEL);
> +	if (!fwdata)
> +		return -ENOMEM;
> +
> +	mrvl->fwdata = fwdata;
> +	init_waitqueue_head(&fwdata->init_wait_q);
> +
> +	return 0;
> +}
> +
> +/* Wait for the header from device */
> +static int mrvl_wait_for_hdr(struct hci_uart *hu, u8 header)
> +{
> +	struct mrvl_data *mrvl = hu->priv;
> +	struct fw_data *fw_data = mrvl->fwdata;
> +
> +	fw_data->expected_ack = header;
> +	fw_data->wait_fw = 0;
> +
> +	if (!wait_event_interruptible_timeout(fw_data->init_wait_q,
> +					      fw_data->wait_fw,
> +					      MRVL_WAIT_TIMEOUT)) {
> +		BT_ERR("TIMEOUT, waiting for:0x%x", fw_data->expected_ack);
> +		return -1;
> +	}
> +
> +	return 0;
> +}
> +
> +/* Send bytes to device */
> +static int mrvl_send_data(struct hci_uart *hu, struct sk_buff *skb)
> +{
> +	struct mrvl_data *mrvl = hu->priv;
> +
> +	skb_queue_head(&mrvl->txq, skb);
> +	hci_uart_tx_wakeup(hu);
> +
> +	if (mrvl_wait_for_hdr(hu, MRVL_HDR_REQ_FW) == -1)
> +		return -1;
> +
> +	return 0;
> +}
> +
> +/* Download firmware to the device */
> +static int mrvl_dnld_fw(struct hci_uart *hu, const char *file_name)
> +{
> +	const struct firmware *fw = NULL;
> +	struct sk_buff *skb = NULL;
> +	int offset = 0;
> +	int ret, tx_len;
> +	struct mrvl_data *mrvl = hu->priv;
> +	struct fw_data *fw_data = mrvl->fwdata;
> +
> +	ret = request_firmware(&fw, file_name, hu->tty->dev);
> +	if (ret < 0) {
> +		BT_ERR("request_firmware() failed");
> +		return -1;
> +	}
> +
> +	BT_INFO("Downloading FW (%d bytes)", (u16)fw->size);
> +
> +	fw_data->last_ack = 0;
> +
> +	while (1) {
> +		if ((offset >= fw->size) || (fw_data->last_ack))
> +			break;
> +		tx_len = fw_data->next_len;
> +		if ((fw->size - offset) < tx_len)
> +			tx_len = fw->size - offset;
> +
> +		skb = bt_skb_alloc(MRVL_MAX_FW_BLOCK_SIZE, GFP_KERNEL);
> +		if (!skb) {
> +			ret = -1;
> +			goto done;
> +		}
> +
> +		memcpy(skb->data, &fw->data[offset], tx_len);
> +		skb_put(skb, tx_len);
> +		if (mrvl_send_data(hu, skb) != 0) {
> +			BT_ERR("Fail to download firmware");
> +			ret = -1;
> +			goto done;
> +		}
> +		offset += tx_len;
> +	}
> +
> +	BT_INFO("Downloaded %d byte firmware", offset);
> +done:
> +	release_firmware(fw);
> +
> +	return ret;
> +}
> +
> +/* Set the baud rate */
> +static int mrvl_set_dev_baud(struct hci_uart *hu)
> +{
> +	struct hci_dev *hdev = hu->hdev;
> +	struct sk_buff *skb;
> +	static const u8 baud_param[] = { 0xc0, 0xc6, 0x2d, 0x00 };
> +	int err;
> +
> +	skb = __hci_cmd_sync(hdev, MRVL_HCI_OP_SET_BAUD, sizeof(baud_param),
> +			     baud_param, HCI_INIT_TIMEOUT);
> +	if (IS_ERR(skb)) {
> +		err = PTR_ERR(skb);
> +		bt_dev_err(hu->hdev, "Set device baudrate failed (%d)", err);
> +		return err;
> +	}
> +	kfree_skb(skb);
> +
> +	return 0;
> +}
> +
> +/* Reset device */
> +static int mrvl_reset(struct hci_uart *hu)
> +{
> +	struct hci_dev *hdev = hu->hdev;
> +	struct sk_buff *skb;
> +	int err;
> +
> +	skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_CMD_TIMEOUT);
> +	if (IS_ERR(skb)) {
> +		err = PTR_ERR(skb);
> +		bt_dev_err(hu->hdev, "Reset device failed (%d)", err);
> +		return err;
> +	}
> +	kfree_skb(skb);
> +
> +	return 0;
> +}
> +
> +static int mrvl_get_fw_name(struct hci_uart *hu, char *fw_name)
> +{
> +	struct mrvl_data *mrvl = hu->priv;
> +	struct fw_data *fw_data = mrvl->fwdata;
> +
> +	if (mrvl_wait_for_hdr(hu, MRVL_HDR_CHIP_VER) != 0) {
> +		BT_ERR("Could not read chip id and revision");
> +		return -1;
> +	}
> +
> +	BT_DBG("chip_id=0x%x, chip_rev=0x%x",
> +	       fw_data->chip_id, fw_data->chip_rev);
> +
> +	switch (fw_data->chip_id) {
> +	case MRVL_8997_CHIP_ID:
> +		memcpy(fw_name, MRVL_8997_FW_NAME, sizeof(MRVL_8997_FW_NAME));
> +		return 0;
> +	default:
> +		BT_ERR("Invalid chip id");
> +		return -1;
> +	}
> +}
> +
> +/* Download helper and firmare to device */
> +static int hci_uart_dnld_fw(struct hci_uart *hu)
> +{
> +	struct tty_struct *tty = hu->tty;
> +	struct ktermios new_termios;
> +	struct ktermios old_termios;
> +	char fw_name[128];
> +	int ret;
> +
> +	old_termios = tty->termios;
> +
> +	if (get_cts(hu)) {
> +		BT_INFO("fw is running");
> +		return 0;
> +	}
> +
> +	hci_uart_set_baudrate(hu, 115200);
> +	hci_uart_set_flow_control(hu, true);
> +
> +	ret = mrvl_wait_for_hdr(hu, MRVL_HDR_REQ_FW);
> +	if (ret)
> +		goto fail;
> +
> +	ret = mrvl_dnld_fw(hu, MRVL_HELPER_NAME);
> +	if (ret)
> +		goto fail;
> +
> +	msleep(MRVL_DNLD_DELAY);
> +
> +	hci_uart_set_baudrate(hu, 3000000);
> +	hci_uart_set_flow_control(hu, false);
> +
> +	ret = mrvl_get_fw_name(hu, fw_name);
> +	if (ret)
> +		goto fail;
> +
> +	ret = mrvl_wait_for_hdr(hu, MRVL_HDR_REQ_FW);
> +	if (ret)
> +		goto fail;
> +
> +	ret = mrvl_dnld_fw(hu, fw_name);
> +	if (ret)
> +		goto fail;
> +
> +	msleep(MRVL_DNLD_DELAY);
> +fail:
> +	/* restore uart settings */
> +	new_termios = tty->termios;
> +	tty->termios.c_cflag = old_termios.c_cflag;
> +	tty_set_termios(tty, &new_termios);
> +
> +	return ret;
> +}
> +
> +static int mrvl_setup(struct hci_uart *hu)
> +{
> +	int err;
> +
> +	hci_uart_set_baudrate(hu, 115200);
> +	hci_uart_set_flow_control(hu, false);
> +
> +	err = mrvl_reset(hu);
> +	if (!err) {
> +		err = mrvl_set_dev_baud(hu);
> +		if (err)
> +			return -1;
> +	}
> +
> +	hci_uart_set_baudrate(hu, 3000000);
> +	hci_uart_set_flow_control(hu, false);
> +	msleep(MRVL_DNLD_DELAY);
> +
> +	return 0;
> +}
> +
> +static int mrvl_prepare(struct hci_uart *hu)
> +{
> +	struct mrvl_data *mrvl = hu->priv;
> +	int err;
> +
> +	err = mrvl_init_fw_data(hu);
> +	if (!err)
> +		err = hci_uart_dnld_fw(hu);
> +
> +	kfree(mrvl->fwdata);
> +	return err;
> +}
> +
> +static const struct hci_uart_proto mrvlp = {
> +	.id		= HCI_UART_MRVL,
> +	.name		= "MRVL",
> +	.open		= mrvl_open,
> +	.close		= mrvl_close,
> +	.recv		= mrvl_recv,
> +	.enqueue	= mrvl_enqueue,
> +	.dequeue	= mrvl_dequeue,
> +	.flush		= mrvl_flush,
> +	.setup		= mrvl_setup,
> +	.prepare	= mrvl_prepare,
> +	.recv_for_prepare	= mrvl_recv_for_prepare,
> +};
> +
> +int __init mrvl_init(void)
> +{
> +	return hci_uart_register_proto(&mrvlp);
> +}
> +
> +int __exit mrvl_deinit(void)
> +{
> +	return hci_uart_unregister_proto(&mrvlp);
> +}
> diff --git a/drivers/bluetooth/hci_uart.h b/drivers/bluetooth/hci_uart.h
> index 17ba3b4..8c53b50 100644
> --- a/drivers/bluetooth/hci_uart.h
> +++ b/drivers/bluetooth/hci_uart.h
> @@ -35,7 +35,7 @@
>   #define HCIUARTGETFLAGS		_IOR('U', 204, int)
>   
>   /* UART protocols */
> -#define HCI_UART_MAX_PROTO	10
> +#define HCI_UART_MAX_PROTO	11
>   
>   #define HCI_UART_H4	0
>   #define HCI_UART_BCSP	1
> @@ -47,6 +47,7 @@
>   #define HCI_UART_BCM	7
>   #define HCI_UART_QCA	8
>   #define HCI_UART_AG6XX	9
> +#define HCI_UART_MRVL	10
>   
>   #define HCI_UART_RAW_DEVICE	0
>   #define HCI_UART_RESET_ON_INIT	1
> @@ -192,3 +193,8 @@ int qca_deinit(void);
>   int ag6xx_init(void);
>   int ag6xx_deinit(void);
>   #endif
> +
> +#ifdef CONFIG_BT_HCIUART_MRVL
> +int mrvl_init(void);
> +int mrvl_deinit(void);
> +#endif
>
>
This serial of patches work well on my device...

Tested-by: Jeffy Chen <jeffy.chen@...k-chips.com>

Powered by blists - more mailing lists