[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1466756892-17015-3-git-send-email-j-keerthy@ti.com>
Date: Fri, 24 Jun 2016 13:58:09 +0530
From: Keerthy <j-keerthy@...com>
To: <lee.jones@...aro.org>, <tony@...mide.com>, <broonie@...nel.org>
CC: <linux-omap@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<t-kristo@...com>, <russ.dill@...com>, <j-keerthy@...com>,
Dave Gerlach <d-gerlach@...com>
Subject: [PATCH v2 3/5] regulator: tps65218: force set power-up/down strobe to 3 for dcdc3
From: Tero Kristo <t-kristo@...com>
The reset value for this register seems broken on certain versions of
tps65218 chip, so make sure the dcdc3 settings is proper. Needed for
proper functionality of rtc+ddr / rtc-only modes.
Signed-off-by: Tero Kristo <t-kristo@...com>
Signed-off-by: Dave Gerlach <d-gerlach@...com>
Signed-off-by: Keerthy <j-keerthy@...com>
---
drivers/regulator/tps65218-regulator.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/regulator/tps65218-regulator.c b/drivers/regulator/tps65218-regulator.c
index 8eca1eb..d1e631d 100644
--- a/drivers/regulator/tps65218-regulator.c
+++ b/drivers/regulator/tps65218-regulator.c
@@ -180,8 +180,12 @@ static int tps65218_pmic_set_suspend_disable(struct regulator_dev *dev)
if (rid < TPS65218_DCDC_1 || rid > TPS65218_LDO_1)
return -EINVAL;
- if (!tps->info[rid]->strobe)
- return -EINVAL;
+ if (!tps->info[rid]->strobe) {
+ if (rid == TPS65218_DCDC_3)
+ tps->info[rid]->strobe = 3;
+ else
+ return -EINVAL;
+ }
return tps65218_set_bits(tps, dev->desc->bypass_reg,
dev->desc->bypass_mask,
--
1.9.1
Powered by blists - more mailing lists