[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20160624182355.23515-6-grygorii.strashko@ti.com>
Date: Fri, 24 Jun 2016 21:23:45 +0300
From: Grygorii Strashko <grygorii.strashko@...com>
To: "David S. Miller" <davem@...emloft.net>, <netdev@...r.kernel.org>,
Mugunthan V N <mugunthanvnm@...com>
CC: Sekhar Nori <nsekhar@...com>, <linux-kernel@...r.kernel.org>,
<linux-omap@...r.kernel.org>,
Ivan Khoronzhuk <ivan.khoronzhuk@...aro.org>,
Rob Herring <robh+dt@...nel.org>, <devicetree@...r.kernel.org>,
Grygorii Strashko <grygorii.strashko@...com>
Subject: [PATCH v2 05/15] drivers: net: cpsw: ndev: fix accessing to suspended device
The CPSW might be suspended by RPM if all ethX interfaces are down,
but it still could be accesible through net_device_ops interfce. In
this case net_device_ops operations requiring registers access will
cause L3 errors and CPSW crash.
Hence, fix it by adding RPM get/put calls in net_device_ops callbacks
which need to access CPSW registers: .ndo_set_mac_address(),
.ndo_vlan_rx_add_vid(), .ndo_vlan_rx_kill_vid().
Signed-off-by: Grygorii Strashko <grygorii.strashko@...com>
---
drivers/net/ethernet/ti/cpsw.c | 33 ++++++++++++++++++++++++++++++---
1 file changed, 30 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index 5fea986..33f9957 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -1616,10 +1616,17 @@ static int cpsw_ndo_set_mac_address(struct net_device *ndev, void *p)
struct sockaddr *addr = (struct sockaddr *)p;
int flags = 0;
u16 vid = 0;
+ int ret;
if (!is_valid_ether_addr(addr->sa_data))
return -EADDRNOTAVAIL;
+ ret = pm_runtime_get_sync(&priv->pdev->dev);
+ if (ret < 0) {
+ pm_runtime_put_noidle(&priv->pdev->dev);
+ return ret;
+ }
+
if (priv->data.dual_emac) {
vid = priv->slaves[priv->emac_port].port_vlan;
flags = ALE_VLAN;
@@ -1634,6 +1641,8 @@ static int cpsw_ndo_set_mac_address(struct net_device *ndev, void *p)
memcpy(ndev->dev_addr, priv->mac_addr, ETH_ALEN);
for_each_slave(priv, cpsw_set_slave_mac, priv);
+ pm_runtime_put(&priv->pdev->dev);
+
return 0;
}
@@ -1698,10 +1707,17 @@ static int cpsw_ndo_vlan_rx_add_vid(struct net_device *ndev,
__be16 proto, u16 vid)
{
struct cpsw_priv *priv = netdev_priv(ndev);
+ int ret;
if (vid == priv->data.default_vlan)
return 0;
+ ret = pm_runtime_get_sync(&priv->pdev->dev);
+ if (ret < 0) {
+ pm_runtime_put_noidle(&priv->pdev->dev);
+ return ret;
+ }
+
if (priv->data.dual_emac) {
/* In dual EMAC, reserved VLAN id should not be used for
* creating VLAN interfaces as this can break the dual
@@ -1716,7 +1732,10 @@ static int cpsw_ndo_vlan_rx_add_vid(struct net_device *ndev,
}
dev_info(priv->dev, "Adding vlanid %d to vlan filter\n", vid);
- return cpsw_add_vlan_ale_entry(priv, vid);
+ ret = cpsw_add_vlan_ale_entry(priv, vid);
+
+ pm_runtime_put(&priv->pdev->dev);
+ return ret;
}
static int cpsw_ndo_vlan_rx_kill_vid(struct net_device *ndev,
@@ -1728,6 +1747,12 @@ static int cpsw_ndo_vlan_rx_kill_vid(struct net_device *ndev,
if (vid == priv->data.default_vlan)
return 0;
+ ret = pm_runtime_get_sync(&priv->pdev->dev);
+ if (ret < 0) {
+ pm_runtime_put_noidle(&priv->pdev->dev);
+ return ret;
+ }
+
if (priv->data.dual_emac) {
int i;
@@ -1747,8 +1772,10 @@ static int cpsw_ndo_vlan_rx_kill_vid(struct net_device *ndev,
if (ret != 0)
return ret;
- return cpsw_ale_del_mcast(priv->ale, priv->ndev->broadcast,
- 0, ALE_VLAN, vid);
+ ret = cpsw_ale_del_mcast(priv->ale, priv->ndev->broadcast,
+ 0, ALE_VLAN, vid);
+ pm_runtime_put(&priv->pdev->dev);
+ return ret;
}
static const struct net_device_ops cpsw_netdev_ops = {
--
2.9.0
Powered by blists - more mailing lists