| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <AM4PR04MB213088094DF074BB5CB3DD0689210@AM4PR04MB2130.eurprd04.prod.outlook.com>
Date: Mon, 27 Jun 2016 08:04:39 +0000
From: Jun Li <jun.li@....com>
To: Stephen Boyd <stephen.boyd@...aro.org>,
"linux-usb@...r.kernel.org" <linux-usb@...r.kernel.org>
CC: "linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-arm-msm@...r.kernel.org" <linux-arm-msm@...r.kernel.org>,
Andy Gross <andy.gross@...aro.org>,
"Bjorn Andersson" <bjorn.andersson@...aro.org>,
Neil Armstrong <narmstrong@...libre.com>,
Arnd Bergmann <arnd@...db.de>, Felipe Balbi <balbi@...nel.org>,
Peter Chen <peter.chen@....com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
"Ivan T. Ivanov" <iivanov.xz@...il.com>
Subject: RE: [PATCH 04/21] usb: chipidea: Only read/write OTGSC from one place
Hi
> -----Original Message-----
> From: linux-usb-owner@...r.kernel.org [mailto:linux-usb-
> owner@...r.kernel.org] On Behalf Of Stephen Boyd
> Sent: Sunday, June 26, 2016 3:28 PM
> To: linux-usb@...r.kernel.org
> Cc: linux-arm-kernel@...ts.infradead.org; linux-kernel@...r.kernel.org;
> linux-arm-msm@...r.kernel.org; Andy Gross <andy.gross@...aro.org>; Bjorn
> Andersson <bjorn.andersson@...aro.org>; Neil Armstrong
> <narmstrong@...libre.com>; Arnd Bergmann <arnd@...db.de>; Felipe Balbi
> <balbi@...nel.org>; Peter Chen <peter.chen@....com>; Greg Kroah-Hartman
> <gregkh@...uxfoundation.org>; Ivan T. Ivanov <iivanov.xz@...il.com>
> Subject: [PATCH 04/21] usb: chipidea: Only read/write OTGSC from one place
>
> With the id and vbus detection done via extcon we need to make sure we
> poll the status of OTGSC properly by considering what the extcon is saying,
> and not just what the register is saying. Let's move this hw_wait_reg()
> function to the only place it's used and simplify it for polling the OTGSC
> register. Then we can make certain we only use the hw_read_otgsc() API to
> read OTGSC, which will make sure we properly handle extcon events.
>
> Cc: Peter Chen <peter.chen@....com>
> Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
> Cc: "Ivan T. Ivanov" <iivanov.xz@...il.com>
> Fixes: 3ecb3e09b042 ("usb: chipidea: Use extcon framework for VBUS and ID
> detect")
> Signed-off-by: Stephen Boyd <stephen.boyd@...aro.org>
> ---
> drivers/usb/chipidea/core.c | 32 --------------------------------
> drivers/usb/chipidea/otg.c | 35 +++++++++++++++++++++++++++++++----
> 2 files changed, 31 insertions(+), 36 deletions(-)
>
> diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
> index 69426e644d17..01390e02ee53 100644
> --- a/drivers/usb/chipidea/core.c
> +++ b/drivers/usb/chipidea/core.c
> @@ -516,38 +516,6 @@ int hw_device_reset(struct ci_hdrc *ci)
> return 0;
> }
>
> -/**
> - * hw_wait_reg: wait the register value
> - *
> - * Sometimes, it needs to wait register value before going on.
> - * Eg, when switch to device mode, the vbus value should be lower
> - * than OTGSC_BSV before connects to host.
> - *
> - * @ci: the controller
> - * @reg: register index
> - * @mask: mast bit
> - * @value: the bit value to wait
> - * @timeout_ms: timeout in millisecond
> - *
> - * This function returns an error code if timeout
> - */
> -int hw_wait_reg(struct ci_hdrc *ci, enum ci_hw_regs reg, u32 mask,
> - u32 value, unsigned int timeout_ms)
> -{
> - unsigned long elapse = jiffies + msecs_to_jiffies(timeout_ms);
> -
> - while (hw_read(ci, reg, mask) != value) {
> - if (time_after(jiffies, elapse)) {
> - dev_err(ci->dev, "timeout waiting for %08x in %d\n",
> - mask, reg);
> - return -ETIMEDOUT;
> - }
> - msleep(20);
> - }
> -
> - return 0;
> -}
> -
> static irqreturn_t ci_irq(int irq, void *data) {
> struct ci_hdrc *ci = data;
> diff --git a/drivers/usb/chipidea/otg.c b/drivers/usb/chipidea/otg.c index
> 03b6743461d1..763a8332b009 100644
> --- a/drivers/usb/chipidea/otg.c
> +++ b/drivers/usb/chipidea/otg.c
> @@ -104,7 +104,32 @@ void ci_handle_vbus_change(struct ci_hdrc *ci)
> usb_gadget_vbus_disconnect(&ci->gadget);
> }
>
> -#define CI_VBUS_STABLE_TIMEOUT_MS 5000
> +/**
> + * Sometimes, it needs to wait register value before going on.
> + * Eg, when switch to device mode, the vbus value should be lower
> + * than OTGSC_BSV before connects to host.
This should be updated since this API is dedicated for BSV now.
> + *
> + * @ci: the controller
> + *
> + * This function returns an error code if timeout */ static int
> +hw_wait_otgsc_bsv(struct ci_hdrc *ci) {
> + unsigned long elapse = jiffies + msecs_to_jiffies(5000);
> + u32 mask = OTGSC_BSV;
> +
> + while (!hw_read_otgsc(ci, mask)) {
Reverse logic, should be:
while (hw_read_otgsc(ci, mask)) {
Li Jun
> + if (time_after(jiffies, elapse)) {
> + dev_err(ci->dev, "timeout waiting for %08x in OTGSC\n",
> + mask);
> + return -ETIMEDOUT;
> + }
> + msleep(20);
> + }
> +
> + return 0;
> +}
> +
> static void ci_handle_id_switch(struct ci_hdrc *ci) {
> enum ci_role role = ci_otg_role(ci);
> @@ -116,9 +141,11 @@ static void ci_handle_id_switch(struct ci_hdrc *ci)
> ci_role_stop(ci);
>
> if (role == CI_ROLE_GADGET)
> - /* wait vbus lower than OTGSC_BSV */
> - hw_wait_reg(ci, OP_OTGSC, OTGSC_BSV, 0,
> - CI_VBUS_STABLE_TIMEOUT_MS);
> + /*
> + * wait vbus lower than OTGSC_BSV before connecting
> + * to host
> + */
> + hw_wait_otgsc_bsv(ci);
>
> ci_role_start(ci, role);
> }
> --
> 2.9.0.rc2.8.ga28705d
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
> the body of a message to majordomo@...r.kernel.org More majordomo info at
> http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists