[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <5770EF53.3090500@ti.com>
Date: Mon, 27 Jun 2016 14:48:11 +0530
From: Mugunthan V N <mugunthanvnm@...com>
To: Grygorii Strashko <grygorii.strashko@...com>,
"David S. Miller" <davem@...emloft.net>, <netdev@...r.kernel.org>
CC: Sekhar Nori <nsekhar@...com>, <linux-kernel@...r.kernel.org>,
<linux-omap@...r.kernel.org>,
Ivan Khoronzhuk <ivan.khoronzhuk@...aro.org>,
Rob Herring <robh+dt@...nel.org>, <devicetree@...r.kernel.org>
Subject: Re: [PATCH v2 00/15] drivers: net: cpsw: improve runtime pm
On Friday 24 June 2016 11:53 PM, Grygorii Strashko wrote:
> This series intended to improve runtime PM and allow CPSW to be
> RPM suspended when all ethX netdevices are down.
>
> To achieve above goal it is required to relax runtime PM constraints for
> Davinci MDIO which blocks CPSW runtime PM now, because Davinci MDIO is always
> powered on during probe and powered off only when it's going to be removed.
> - Patches 6-11 implement PM runtime autosuspend for Davinci MDIO, but keep it
> disabled by default, because Davinci MDIO is integrated in big set of TI devices
> and not all of them verified to work correctly with RPM autosuspend enabled:
> expected to work on SoCs where MDIO is defined as part of CPSW in DT
> (cpsw.c DRA7/am57x, am437x, am335x)
> The CPSW need to be fixed before RPM suspended can be allowed:
> - Patches 1-5 ensure that CPSW will not cause L3 errors while it is in RPM
> suspended state.
>
> Davinci MDIO RPM autosuspend can be enabled through sysfs:
> echo 100 > /sys/devices/../48484000.ethernet/48485000.mdio/power/autosuspend_delay_ms
>
> Patches 12 - 15: introduce new compatible string "ti,cpsw-mdio" which is used
> then to enable RPM for am335x/am437x/dra7 SoCs.
>
> Tested on am335x, am437x, am572x and k2g (on k2g with RPM disabled for Davinci MDIO)
> These changes should not affect on errata i877 implementation on DRA7.
>
> Power measurement on am335x GP EVM:
> Without this series: 547.60 mW total SoC power
> With this series + "ifconfig eth0 down": 477.32 mW Total Soc Power
>
> Changes in v2:
> - CPSW ethtool interface updated to use .begin()/.complete() callbacks
> - kbuild failure fixed
> - davinci_mdio DT updated with proper description of allowed compatible strings
> combinations
>
> Link on v1:
> https://lkml.org/lkml/2016/6/15/362
For the series.
Reviewed-by: Mugunthan V N <mugunthanvnm@...com>
Regards
Mugunthan V N
>
> Grygorii Strashko (15):
> drivers: net: cpsw: fix suspend when all ethX devices are down
> drivers: net: cpsw: check return code from pm runtime calls
> drivers: net: cpsw: remove pm runtime calls from suspend callbacks
> drivers: net: cpsw: ethtool: fix accessing to suspended device
> drivers: net: cpsw: ndev: fix accessing to suspended device
> drivers: net: davinci_mdio: do pm runtime initialization later in probe
> drivers: net: davinci_mdio: remove pm runtime calls from suspend callbacks
> drivers: net: davinci_mdio: drop suspended and lock fields from mdio_data
> drivers: net: davinci_mdio: split reset function on init_clk and enable
> drivers: net: davinci_mdio: add pm runtime callbacks
> drivers: net: davinci_mdio: implement pm runtime auto mode
> net: davinci_mdio: document missed "ti,am4372-mdio" compat string
> net: davinci_mdio: introduce "ti,cpsw-mdio" compat string
> drivers: net: davinci_mdio: enable pm runtime auto for ti cpsw-mdio
> ARM: dts: am335x/am437x/dra7: use new "ti,cpsw-mdio" compat string
>
> .../devicetree/bindings/net/davinci-mdio.txt | 5 +-
> arch/arm/boot/dts/am33xx.dtsi | 2 +-
> arch/arm/boot/dts/am4372.dtsi | 2 +-
> arch/arm/boot/dts/dra7.dtsi | 2 +-
> drivers/net/ethernet/ti/cpsw.c | 79 ++++++++--
> drivers/net/ethernet/ti/davinci_mdio.c | 169 +++++++++++++--------
> 6 files changed, 182 insertions(+), 77 deletions(-)
>
Powered by blists - more mailing lists