| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1467021255-95900-10-git-send-email-Yisen.Zhuang@huawei.com>
Date: Mon, 27 Jun 2016 17:54:15 +0800
From: Yisen Zhuang <Yisen.Zhuang@...wei.com>
To: <davem@...emloft.net>, <yisen.zhuang@...wei.com>,
<salil.mehta@...wei.com>, <yankejian@...wei.com>
CC: <liguozhu@...wei.com>, <huangdaode@...ilicon.com>, <arnd@...db.de>,
<andriy.shevchenko@...ux.intel.com>, <andrew@...n.ch>,
<geliangtang@....com>, <ivecera@...hat.com>,
<fengguang.wu@...el.com>, <charles.chenxin@...wei.com>,
<netdev@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>, <linuxarm@...wei.com>
Subject: [PATCH net-next 9/9] net: hns: get reset registers from DT
From: Kejian Yan <yankejian@...wei.com>
Since the registers of subctrl may be different, it is better to
mv the registers from hns mdio driver routine to device tree node.
Signed-off-by: Kejian Yan <yankejian@...wei.com>
---
drivers/net/ethernet/hisilicon/hns_mdio.c | 80 +++++++++++++++++++++++++------
1 file changed, 66 insertions(+), 14 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns_mdio.c b/drivers/net/ethernet/hisilicon/hns_mdio.c
index 761a32f..988ad69 100644
--- a/drivers/net/ethernet/hisilicon/hns_mdio.c
+++ b/drivers/net/ethernet/hisilicon/hns_mdio.c
@@ -37,9 +37,19 @@
#define MDIO_TIMEOUT 1000000
+struct hns_mdio_sc_reg {
+ u16 mdio_clk_en;
+ u16 mdio_clk_dis;
+ u16 mdio_reset_req;
+ u16 mdio_reset_dreq;
+ u16 mdio_clk_st;
+ u16 mdio_reset_st;
+};
+
struct hns_mdio_device {
void *vbase; /* mdio reg base address */
struct regmap *subctrl_vbase;
+ struct hns_mdio_sc_reg sc_reg;
};
/* mdio reg */
@@ -93,7 +103,6 @@ enum mdio_c45_op_seq {
#define MDIO_SC_CLK_DIS 0x33C
#define MDIO_SC_RESET_REQ 0xA38
#define MDIO_SC_RESET_DREQ 0xA3C
-#define MDIO_SC_CTRL 0x2010
#define MDIO_SC_CLK_ST 0x531C
#define MDIO_SC_RESET_ST 0x5A1C
@@ -353,6 +362,7 @@ static int hns_mdio_read(struct mii_bus *bus, int phy_id, int regnum)
static int hns_mdio_reset(struct mii_bus *bus)
{
struct hns_mdio_device *mdio_dev = (struct hns_mdio_device *)bus->priv;
+ const struct hns_mdio_sc_reg *sc_reg;
int ret;
if (dev_of_node(bus->parent)) {
@@ -361,9 +371,10 @@ static int hns_mdio_reset(struct mii_bus *bus)
return -ENODEV;
}
+ sc_reg = &mdio_dev->sc_reg;
/* 1. reset req, and read reset st check */
- ret = mdio_sc_cfg_reg_write(mdio_dev, MDIO_SC_RESET_REQ, 0x1,
- MDIO_SC_RESET_ST, 0x1,
+ ret = mdio_sc_cfg_reg_write(mdio_dev, sc_reg->mdio_reset_req, 0x1,
+ sc_reg->mdio_reset_st, 0x1,
MDIO_CHECK_SET_ST);
if (ret) {
dev_err(&bus->dev, "MDIO reset fail\n");
@@ -371,8 +382,8 @@ static int hns_mdio_reset(struct mii_bus *bus)
}
/* 2. dis clk, and read clk st check */
- ret = mdio_sc_cfg_reg_write(mdio_dev, MDIO_SC_CLK_DIS,
- 0x1, MDIO_SC_CLK_ST, 0x1,
+ ret = mdio_sc_cfg_reg_write(mdio_dev, sc_reg->mdio_clk_dis,
+ 0x1, sc_reg->mdio_clk_st, 0x1,
MDIO_CHECK_CLR_ST);
if (ret) {
dev_err(&bus->dev, "MDIO dis clk fail\n");
@@ -380,8 +391,8 @@ static int hns_mdio_reset(struct mii_bus *bus)
}
/* 3. reset dreq, and read reset st check */
- ret = mdio_sc_cfg_reg_write(mdio_dev, MDIO_SC_RESET_DREQ, 0x1,
- MDIO_SC_RESET_ST, 0x1,
+ ret = mdio_sc_cfg_reg_write(mdio_dev, sc_reg->mdio_reset_dreq, 0x1,
+ sc_reg->mdio_reset_st, 0x1,
MDIO_CHECK_CLR_ST);
if (ret) {
dev_err(&bus->dev, "MDIO dis clk fail\n");
@@ -389,8 +400,8 @@ static int hns_mdio_reset(struct mii_bus *bus)
}
/* 4. en clk, and read clk st check */
- ret = mdio_sc_cfg_reg_write(mdio_dev, MDIO_SC_CLK_EN,
- 0x1, MDIO_SC_CLK_ST, 0x1,
+ ret = mdio_sc_cfg_reg_write(mdio_dev, sc_reg->mdio_clk_en,
+ 0x1, sc_reg->mdio_clk_st, 0x1,
MDIO_CHECK_SET_ST);
if (ret)
dev_err(&bus->dev, "MDIO en clk fail\n");
@@ -458,13 +469,54 @@ static int hns_mdio_probe(struct platform_device *pdev)
snprintf(new_bus->id, MII_BUS_ID_SIZE, "%s-%s", "Mii",
dev_name(&pdev->dev));
if (dev_of_node(&pdev->dev)) {
- mdio_dev->subctrl_vbase = syscon_node_to_regmap(
- of_parse_phandle(pdev->dev.of_node,
- "subctrl-vbase", 0));
- if (IS_ERR(mdio_dev->subctrl_vbase)) {
- dev_warn(&pdev->dev, "no syscon hisilicon,peri-c-subctrl\n");
+ struct of_phandle_args reg_args;
+
+ ret = of_parse_phandle_with_fixed_args(pdev->dev.of_node,
+ "subctrl-vbase",
+ 4,
+ 0,
+ ®_args);
+ if (!ret) {
+ mdio_dev->subctrl_vbase =
+ syscon_node_to_regmap(reg_args.np);
+ if (IS_ERR(mdio_dev->subctrl_vbase)) {
+ dev_warn(&pdev->dev, "syscon_node_to_regmap error\n");
+ mdio_dev->subctrl_vbase = NULL;
+ } else {
+ if (reg_args.args_count == 4) {
+ mdio_dev->sc_reg.mdio_clk_en =
+ (u16)reg_args.args[0];
+ mdio_dev->sc_reg.mdio_clk_dis =
+ (u16)reg_args.args[0] + 4;
+ mdio_dev->sc_reg.mdio_reset_req =
+ (u16)reg_args.args[1];
+ mdio_dev->sc_reg.mdio_reset_dreq =
+ (u16)reg_args.args[1] + 4;
+ mdio_dev->sc_reg.mdio_clk_st =
+ (u16)reg_args.args[2];
+ mdio_dev->sc_reg.mdio_reset_st =
+ (u16)reg_args.args[3];
+ } else {
+ /* for compatible */
+ mdio_dev->sc_reg.mdio_clk_en =
+ MDIO_SC_CLK_EN;
+ mdio_dev->sc_reg.mdio_clk_dis =
+ MDIO_SC_CLK_DIS;
+ mdio_dev->sc_reg.mdio_reset_req =
+ MDIO_SC_RESET_REQ;
+ mdio_dev->sc_reg.mdio_reset_dreq =
+ MDIO_SC_RESET_DREQ;
+ mdio_dev->sc_reg.mdio_clk_st =
+ MDIO_SC_CLK_ST;
+ mdio_dev->sc_reg.mdio_reset_st =
+ MDIO_SC_RESET_ST;
+ }
+ }
+ } else {
+ dev_warn(&pdev->dev, "find syscon ret = %#x\n", ret);
mdio_dev->subctrl_vbase = NULL;
}
+
ret = of_mdiobus_register(new_bus, pdev->dev.of_node);
} else if (is_acpi_node(pdev->dev.fwnode)) {
/* Clear all the IRQ properties */
--
1.9.1
Powered by blists - more mailing lists