| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1467095795-5082-20-git-send-email-ysato@users.sourceforge.jp>
Date: Tue, 28 Jun 2016 15:36:35 +0900
From: Yoshinori Sato <ysato@...rs.sourceforge.jp>
To: devicetree@...r.kernel.org, linux-sh@...r.kernel.org,
linux-kernel@...r.kernel.org
Cc: Yoshinori Sato <ysato@...rs.sourceforge.jp>
Subject: [PATCH v3 19/19] sh: Renesas R0P751RLC0011RL (a.k.a R2Dplus) support
Signed-off-by: Yoshinori Sato <ysato@...rs.sourceforge.jp>
---
.../interrupt-controller/renesas-r2dplus.txt | 41 ++++++++++
arch/sh/boot/dts/Makefile | 1 +
arch/sh/boot/dts/r2dplus.dts | 84 +++++++++++++++++++++
drivers/irqchip/Makefile | 2 +-
drivers/irqchip/irq-renesas-r2dplus.c | 88 ++++++++++++++++++++++
5 files changed, 215 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/renesas-r2dplus.txt
create mode 100644 arch/sh/boot/dts/r2dplus.dts
create mode 100644 drivers/irqchip/irq-renesas-r2dplus.c
diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas-r2dplus.txt b/Documentation/devicetree/bindings/interrupt-controller/renesas-r2dplus.txt
new file mode 100644
index 0000000..ca2727e
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/renesas-r2dplus.txt
@@ -0,0 +1,41 @@
+DT bindings for the Renesas R0P751RLC0011RL (R2Dplus) interrupt controller
+
+Required properties:
+
+ - compatible: has to be "renesas,r2dplus-intc".
+
+ - reg: Base address and length of interrupt controller register.
+
+ - interrupt-controller: Identifies the node as an interrupt controller.
+
+ - #address-cells: has to be <0>.
+
+ - #interrupt-cells: has to be <1>: an interrupt index.
+
+ - interrupt-map: Interrupt mapping on parent controller.
+
+Example
+-------
+
+ fpgaintc: fpga@...00000 {
+ compatible = "renesas,r2dplus-intc";
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ reg = <0xa4000000 0x40>;
+ interrupt-map=<0 &shintc evt2irq(0x200)>,
+ <1 &shintc evt2irq(0x220)>,
+ <2 &shintc evt2irq(0x240)>,
+ <3 &shintc evt2irq(0x260)>,
+ <4 &shintc evt2irq(0x280)>,
+ <5 &shintc evt2irq(0x2a0)>,
+ <6 &shintc evt2irq(0x2c0)>,
+ <7 &shintc evt2irq(0x2e0)>,
+ <8 &shintc evt2irq(0x300)>,
+ <9 &shintc evt2irq(0x320)>,
+ <10 &shintc evt2irq(0x340)>,
+ <11 &shintc evt2irq(0x360)>,
+ <12 &shintc evt2irq(0x380)>,
+ <13 &shintc evt2irq(0x3a0)>,
+ <14 &shintc evt2irq(0x3c0)>,
+ };
diff --git a/arch/sh/boot/dts/Makefile b/arch/sh/boot/dts/Makefile
index cf5aec4..e059ce2b 100644
--- a/arch/sh/boot/dts/Makefile
+++ b/arch/sh/boot/dts/Makefile
@@ -1,6 +1,7 @@
obj-$(CONFIG_USE_BUILTIN_DTB) += $(patsubst "%",%,$(CONFIG_BUILTIN_DTB_SOURCE)).dtb.o
dtb-y += landisk.dtb
+otb-y += r2dplus.dtb
dtstree := $(srctree)/$(src)
clean-files := *.dtb.S
diff --git a/arch/sh/boot/dts/r2dplus.dts b/arch/sh/boot/dts/r2dplus.dts
new file mode 100644
index 0000000..32256f2
--- /dev/null
+++ b/arch/sh/boot/dts/r2dplus.dts
@@ -0,0 +1,84 @@
+/dts-v1/;
+
+#include "sh7751.dtsi"
+
+/ {
+ model = "Renesas RTS7751R2D+";
+ compatible = "renesas,r2dplus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&shintc>;
+ chosen {
+ stdout-path = &sci1;
+ bootargs = "console=ttySC1,115200";
+ };
+ aliases {
+ serial1 = &sci1;
+ };
+
+ memory@...00000 {
+ device_type = "memory";
+ reg = <0x0c000000 0x4000000>;
+ };
+ fpgaintc: fpga@...00000 {
+ compatible = "renesas,r2dplus-intc";
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ reg = <0xa4000000 0x40>;
+ interrupt-map=<0 &shintc evt2irq(0x200)>,
+ <1 &shintc evt2irq(0x220)>,
+ <2 &shintc evt2irq(0x240)>,
+ <3 &shintc evt2irq(0x260)>,
+ <4 &shintc evt2irq(0x280)>,
+ <5 &shintc evt2irq(0x2a0)>,
+ <6 &shintc evt2irq(0x2c0)>,
+ <7 &shintc evt2irq(0x2e0)>,
+ <8 &shintc evt2irq(0x300)>,
+ <9 &shintc evt2irq(0x320)>,
+ <10 &shintc evt2irq(0x340)>,
+ <11 &shintc evt2irq(0x360)>,
+ <12 &shintc evt2irq(0x380)>,
+ <13 &shintc evt2irq(0x3a0)>,
+ <14 &shintc evt2irq(0x3c0)>;
+ };
+ pata: pata@...01000 {
+ compatible = "ata-generic";
+ reg = <0xb4001000 0x10>, <0xb400080c 0x02>;
+ interrupt-parent = <&fpgaintc>;
+ interrupts = <1 0>;
+ reg-shift = <1>;
+ pio-mode = <0>;
+ };
+ sm501: display@...00000 {
+ compatible = "smi,sm501";
+ reg = <0x10000000 0x13dfffff>, <0x13e00000 0x13ffffff>;
+ interrupt-parent = <&fpgaintc>;
+ interrupts = <4 0>;
+ mode = "640x480-16@60";
+ edid = [00 ff ff ff ff ff ff 00 04 21 00 00 00 00 00 00
+ 01 00 01 03 80 00 00 00 00 00 00 00 00 00 00 00
+ 00 00 00 20 00 00 01 00 01 00 01 00 01 00 01 00
+ 01 00 01 00 01 00 f3 0d 7b 69 30 05 23 20 00 60
+ 02 00 80 e0 21 00 00 1e 00 00 00 10 00 00 00 00
+ 00 00 00 00 00 00 00 00 00 00 00 00 00 10 00 00
+ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b7];
+ smi,devices = <1>;
+ };
+};
+
+&oclk {
+ clock-frequency = <60000000>;
+};
+
+&sci1 {
+ status = "ok";
+};
+
+&pci {
+ compatible = "renesas,sh7751-pci", "renesas.r2dplus-pci";
+ interrupt-map-mask = <0x1800 0 7>;
+ interrupt-map = <0x1000 0 1 &fpgaintc 3 0>;
+ status = "ok";
+};
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index 5e225cf..1e0f1c3 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -69,4 +69,4 @@ obj-$(CONFIG_PIC32_EVIC) += irq-pic32-evic.o
obj-$(CONFIG_MVEBU_ODMI) += irq-mvebu-odmi.o
obj-$(CONFIG_LS_SCFG_MSI) += irq-ls-scfg-msi.o
obj-$(CONFIG_EZNPS_GIC) += irq-eznps.o
-obj-$(CONFIG_RENESAS_SH_INTC) += irq-renesas-sh7751.o irq-io-landisk.o
+obj-$(CONFIG_RENESAS_SH_INTC) += irq-renesas-sh7751.o irq-io-landisk.o irq-renesas-r2dplus.o
diff --git a/drivers/irqchip/irq-renesas-r2dplus.c b/drivers/irqchip/irq-renesas-r2dplus.c
new file mode 100644
index 0000000..3f80775
--- /dev/null
+++ b/drivers/irqchip/irq-renesas-r2dplus.c
@@ -0,0 +1,88 @@
+/*
+ * Renesas RTS7751R2D+ FPGA IRQ driver
+ *
+ * Copyright 2016 Yoshinori Sato <ysato@...rs.sourceforge.jp>
+ */
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/irqchip.h>
+#include <linux/irqdomain.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/io.h>
+
+static const u16 mask_bit[] = {
+ BIT(11),
+ BIT(9),
+ BIT(8),
+ BIT(12),
+ BIT(10),
+ BIT(6),
+ BIT(5),
+ BIT(4),
+ BIT(7),
+ BIT(14),
+ BIT(13),
+ BIT(0),
+ BIT(15),
+};
+
+static void r2dplus_mask_irq(struct irq_data *data)
+{
+ u16 mask = __raw_readw(data->chip_data);
+
+ mask &= ~mask_bit[data->irq];
+ __raw_writew(mask, data->chip_data);
+}
+
+static void r2dplus_unmask_irq(struct irq_data *data)
+{
+ u16 mask = __raw_readw(data->chip_data);
+
+ mask |= mask_bit[data->irq];
+ __raw_writew(mask, data->chip_data);
+}
+
+static struct irq_chip fpga_irq_chip = {
+ .name = "R2DPLUS-FPGA",
+ .irq_unmask = r2dplus_unmask_irq,
+ .irq_mask = r2dplus_mask_irq,
+};
+
+static int fpga_map(struct irq_domain *d, unsigned int virq,
+ irq_hw_number_t hw_irq_num)
+{
+ irq_set_chip_and_handler(virq, &fpga_irq_chip,
+ handle_simple_irq);
+ irq_set_chip_data(virq, d->host_data);
+
+ return 0;
+}
+
+static struct irq_domain_ops irq_ops = {
+ .xlate = irq_domain_xlate_onecell,
+ .map = fpga_map,
+};
+
+static int __init r2dplus_intc_of_init(struct device_node *intc,
+ struct device_node *parent)
+{
+ struct irq_domain *domain, *pdomain;
+ int num_irqpin;
+ void *baseaddr;
+
+ baseaddr = of_iomap(intc, 0);
+ pdomain = irq_find_host(parent);
+ of_get_property(intc, "interrupt-map", &num_irqpin);
+ num_irqpin /= sizeof(u32) * 3;
+ domain = irq_domain_create_hierarchy(pdomain, 0, num_irqpin,
+ of_node_to_fwnode(intc),
+ &irq_ops, baseaddr);
+ if (!domain)
+ panic("%s: unable to create IRQ domain\n", intc->full_name);
+ irq_domain_associate_many(domain, 0, 0, 16);
+ return 0;
+}
+
+IRQCHIP_DECLARE(cpld_intc, "renesas,r2dplus-intc", r2dplus_intc_of_init);
--
2.7.0
Powered by blists - more mailing lists