Message-Id: <1467101897-15946-3-git-send-email-quentin.schulz@free-electrons.com>
Date:	Tue, 28 Jun 2016 10:18:16 +0200
From:	Quentin Schulz <quentin.schulz@...e-electrons.com>
To:	jdelvare@...e.com, linux@...ck-us.net, jic23@...nel.org,
	knaack.h@....de, lars@...afoo.de, pmeerw@...erw.net,
	maxime.ripard@...e-electrons.com, wens@...e.org,
	lee.jones@...aro.org
Cc:	Quentin Schulz <quentin.schulz@...e-electrons.com>,
	linux-kernel@...r.kernel.org, linux-hwmon@...r.kernel.org,
	linux-iio@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
	thomas.petazzoni@...e-electrons.com,
	antoine.tenart@...e-electrons.com
Subject: [PATCH 2/3] iio: adc: add support for Allwinner SoCs ADC

The Allwinner SoCs all have an ADC that can also act as a touchscreen
controller and a thermal sensor. This patch adds the ADC driver which is
based on the MFD for the same SoCs ADC.

This also registers the thermal adc channel in the iio map array so
iio_hwmon could use it without modifying the Device Tree.

This driver probes on three different platform_device_id to take into
account slight differences between Allwinner SoCs ADCs.

Signed-off-by: Quentin Schulz <quentin.schulz@...e-electrons.com>
---
 drivers/iio/adc/Kconfig           |  12 ++
 drivers/iio/adc/Makefile          |   1 +
 drivers/iio/adc/sunxi-gpadc-iio.c | 371 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 384 insertions(+)
 create mode 100644 drivers/iio/adc/sunxi-gpadc-iio.c

diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 82c718c..b7b566a 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -328,6 +328,18 @@ config NAU7802
 	  To compile this driver as a module, choose M here: the
 	  module will be called nau7802.
 
+config SUNXI_ADC
+	tristate "ADC driver for sunxi platforms"
+	depends on IIO
+	depends on MFD_SUNXI_ADC
+	help
+	  Say yes here to build support for Allwinner SoCs (A10, A13 and A31)
+	  SoCs ADC. This ADC provides 4 channels which can be used as an ADC or
+	  as a touchscreen input and one channel for thermal sensor.
+
+          To compile this driver as a module, choose M here: the
+          module will be called sunxi-gpadc-iio.
+
 config PALMAS_GPADC
 	tristate "TI Palmas General Purpose ADC"
 	depends on MFD_PALMAS
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index 0cb7921..2996a5b 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -32,6 +32,7 @@ obj-$(CONFIG_MCP3422) += mcp3422.o
 obj-$(CONFIG_MEN_Z188_ADC) += men_z188_adc.o
 obj-$(CONFIG_MXS_LRADC) += mxs-lradc.o
 obj-$(CONFIG_NAU7802) += nau7802.o
+obj-$(CONFIG_SUNXI_ADC) += sunxi-gpadc-iio.o
 obj-$(CONFIG_PALMAS_GPADC) += palmas_gpadc.o
 obj-$(CONFIG_QCOM_SPMI_IADC) += qcom-spmi-iadc.o
 obj-$(CONFIG_QCOM_SPMI_VADC) += qcom-spmi-vadc.o
diff --git a/drivers/iio/adc/sunxi-gpadc-iio.c b/drivers/iio/adc/sunxi-gpadc-iio.c
new file mode 100644
index 0000000..5840f43
--- /dev/null
+++ b/drivers/iio/adc/sunxi-gpadc-iio.c
@@ -0,0 +1,371 @@
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/machine.h>
+#include <linux/iio/driver.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/sunxi-gpadc-mfd.h>
+#include <linux/regmap.h>
+
+#define TP_CTRL0			0x00
+#define TP_CTRL1			0x04
+#define TP_CTRL2			0x08
+#define TP_CTRL3			0x0c
+#define TP_TPR				0x18
+#define TP_CDAT				0x1c
+#define TEMP_DATA			0x20
+#define TP_DATA				0x24
+
+/* TP_CTRL0 bits */
+#define ADC_FIRST_DLY(x)		((x) << 24) /* 8 bits */
+#define ADC_FIRST_DLY_MODE		BIT(23)
+#define ADC_CLK_SELECT			BIT(22)
+#define ADC_CLK_DIVIDER(x)		((x) << 20) /* 2 bits */
+#define FS_DIV(x)			((x) << 16) /* 4 bits */
+#define T_ACQ(x)			((x) << 0)  /* 16 bits*/
+
+/* TP_CTRL1 bits */
+#define STYLUS_UP_DEBOUNCE(x)		((x) << 12) /* 8 bits */
+#define STYLUS_UP_DEBOUNCE_EN		BIT(9)
+#define TOUCH_PAN_CALI_EN		BIT(6)
+#define TP_DUAL_EN			BIT(5)
+#define TP_MODE_EN			BIT(4)
+#define TP_ADC_SELECT			BIT(3)
+#define ADC_CHAN_SELECT(x)		((x) << 0)  /* 3 bits */
+
+/* TP_CTRL1 bits for sun6i SOCs */
+#define SUN6I_TOUCH_PAN_CALI_EN		BIT(7)
+#define SUN6I_TP_DUAL_EN		BIT(6)
+#define SUN6I_TP_MODE_EN		BIT(5)
+#define SUN6I_TP_ADC_SELECT		BIT(4)
+#define SUN6I_ADC_CHAN_SELECT(x)	BIT(x)  /* 4 bits */
+
+/* TP_CTRL2 bits */
+#define TP_SENSITIVE_ADJUST(x)		((x) << 28) /* 4 bits */
+#define TP_MODE_SELECT(x)		((x) << 26) /* 2 bits */
+#define PRE_MEA_EN			BIT(24)
+#define PRE_MEA_THRE_CNT(x)		((x) << 0)  /* 24 bits*/
+
+/* TP_CTRL3 bits */
+#define FILTER_EN			BIT(2)
+#define FILTER_TYPE(x)			((x) << 0)  /* 2 bits */
+
+/* TP_INT_FIFOC irq and fifo mask / control bits */
+#define TEMP_IRQ_EN			BIT(18)
+#define TP_OVERRUN_IRQ_EN		BIT(17)
+#define TP_DATA_IRQ_EN			BIT(16)
+#define TP_DATA_XY_CHANGE		BIT(13)
+#define TP_FIFO_TRIG_LEVEL(x)		((x) << 8)  /* 5 bits */
+#define TP_DATA_DRQ_EN			BIT(7)
+#define TP_FIFO_FLUSH			BIT(4)
+#define TP_UP_IRQ_EN			BIT(1)
+#define TP_DOWN_IRQ_EN			BIT(0)
+
+/* TP_INT_FIFOS irq and fifo status bits */
+#define TEMP_DATA_PENDING		BIT(18)
+#define FIFO_OVERRUN_PENDING		BIT(17)
+#define FIFO_DATA_PENDING		BIT(16)
+#define TP_IDLE_FLG			BIT(2)
+#define TP_UP_PENDING			BIT(1)
+#define TP_DOWN_PENDING			BIT(0)
+
+/* TP_TPR bits */
+#define TEMP_ENABLE(x)			((x) << 16)
+#define TEMP_PERIOD(x)			((x) << 0)  /*t = x * 256 * 16 / clkin*/
+
+#define ARCH_SUN4I			BIT(0)
+#define ARCH_SUN5I			BIT(1)
+#define ARCH_SUN6I			BIT(2)
+
+struct sunxi_gpadc_dev {
+	void __iomem			*regs;
+	struct completion		completion;
+	int				temp_data;
+	u32				adc_data;
+	struct regmap			*regmap;
+	unsigned int			fifo_data_irq;
+	unsigned int			temp_data_irq;
+	unsigned int			flags;
+};
+
+#define ADC_CHANNEL(_channel, _name) {				\
+	.type = IIO_VOLTAGE,					\
+	.indexed = 1,						\
+	.channel = _channel,					\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),	\
+	.datasheet_name = _name,				\
+}
+
+static struct iio_map sunxi_gpadc_hwmon_maps[] = {
+	{
+		.adc_channel_label = "temp_adc",
+		.consumer_dev_name = "iio_hwmon.0",
+	},
+	{},
+};
+
+static const struct iio_chan_spec sunxi_gpadc_channels[] = {
+	ADC_CHANNEL(0, "adc_chan0"),
+	ADC_CHANNEL(1, "adc_chan1"),
+	ADC_CHANNEL(2, "adc_chan2"),
+	ADC_CHANNEL(3, "adc_chan3"),
+	{
+		.type = IIO_TEMP,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+		.datasheet_name = "temp_adc",
+	},
+};
+
+static int sunxi_gpadc_adc_read(struct iio_dev *indio_dev, int channel)
+{
+	struct sunxi_gpadc_dev *info = iio_priv(indio_dev);
+	int val = 0;
+
+	mutex_lock(&indio_dev->mlock);
+
+	reinit_completion(&info->completion);
+	regmap_write(info->regmap, TP_CTRL1, SUN6I_TP_MODE_EN |
+					     SUN6I_TP_ADC_SELECT |
+					     SUN6I_ADC_CHAN_SELECT(channel));
+	regmap_write(info->regmap, TP_INT_FIFOC, TP_FIFO_TRIG_LEVEL(1) |
+						 TP_FIFO_FLUSH);
+	enable_irq(info->fifo_data_irq);
+
+	if (!wait_for_completion_timeout(&info->completion,
+					 msecs_to_jiffies(100))) {
+		disable_irq(info->fifo_data_irq);
+		mutex_unlock(&indio_dev->mlock);
+		return -ETIMEDOUT;
+	}
+
+	val = info->adc_data;
+	disable_irq(info->fifo_data_irq);
+	mutex_unlock(&indio_dev->mlock);
+
+	return val;
+}
+
+static int sunxi_gpadc_temp_read(struct iio_dev *indio_dev)
+{
+	struct sunxi_gpadc_dev *info = iio_priv(indio_dev);
+	int val = 0;
+
+	mutex_lock(&indio_dev->mlock);
+
+	reinit_completion(&info->completion);
+
+	regmap_write(info->regmap, TP_INT_FIFOC, TP_FIFO_TRIG_LEVEL(1) |
+						 TP_FIFO_FLUSH);
+	regmap_write(info->regmap, TP_CTRL1, SUN6I_TP_MODE_EN);
+	enable_irq(info->temp_data_irq);
+
+	if (!wait_for_completion_timeout(&info->completion,
+					 msecs_to_jiffies(100))) {
+		disable_irq(info->temp_data_irq);
+		mutex_unlock(&indio_dev->mlock);
+		return -ETIMEDOUT;
+	}
+
+	if (info->flags & ARCH_SUN4I)
+		val = info->temp_data * 133 - 257000;
+	else if (info->flags & ARCH_SUN5I)
+		val = info->temp_data * 100 - 144700;
+	else if (info->flags & ARCH_SUN6I)
+		val = info->temp_data * 167 - 271000;
+
+	disable_irq(info->temp_data_irq);
+	mutex_unlock(&indio_dev->mlock);
+	return val;
+}
+
+static int sunxi_gpadc_read_raw(struct iio_dev *indio_dev,
+				struct iio_chan_spec const *chan,
+				int *val, int *val2, long mask)
+{
+	switch (mask) {
+	case IIO_CHAN_INFO_PROCESSED:
+		*val = sunxi_gpadc_temp_read(indio_dev);
+		if (*val < 0)
+			return *val;
+
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_RAW:
+		*val = sunxi_gpadc_adc_read(indio_dev, chan->channel);
+		if (*val < 0)
+			return *val;
+
+		return IIO_VAL_INT;
+	default:
+		break;
+	}
+
+	return -EINVAL;
+}
+
+static const struct iio_info sunxi_gpadc_iio_info = {
+	.read_raw = sunxi_gpadc_read_raw,
+	.driver_module = THIS_MODULE,
+};
+
+static irqreturn_t sunxi_gpadc_temp_data_irq_handler(int irq, void *dev_id)
+{
+	struct sunxi_gpadc_dev *info = dev_id;
+	int ret;
+
+	ret = regmap_read(info->regmap, TEMP_DATA, &info->temp_data);
+	if (ret == 0)
+		complete(&info->completion);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t sunxi_gpadc_fifo_data_irq_handler(int irq, void *dev_id)
+{
+	struct sunxi_gpadc_dev *info = dev_id;
+	int ret;
+
+	ret = regmap_read(info->regmap, TP_DATA, &info->adc_data);
+	if (ret == 0)
+		complete(&info->completion);
+
+	return IRQ_HANDLED;
+}
+
+static int sunxi_gpadc_probe(struct platform_device *pdev)
+{
+	struct sunxi_gpadc_dev *info = NULL;
+	struct iio_dev *indio_dev = NULL;
+	int ret = 0;
+	unsigned int irq;
+	struct sunxi_gpadc_mfd_dev *sunxi_gpadc_mfd_dev;
+
+	sunxi_gpadc_mfd_dev = dev_get_drvdata(pdev->dev.parent);
+
+	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*info));
+	if (!indio_dev) {
+		dev_err(&pdev->dev, "failed to allocate iio device.\n");
+		return -ENOMEM;
+	}
+	info = iio_priv(indio_dev);
+
+	info->regmap = sunxi_gpadc_mfd_dev->regmap;
+	init_completion(&info->completion);
+	indio_dev->name = dev_name(&pdev->dev);
+	indio_dev->dev.parent = &pdev->dev;
+	indio_dev->dev.of_node = pdev->dev.of_node;
+	indio_dev->info = &sunxi_gpadc_iio_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->num_channels = ARRAY_SIZE(sunxi_gpadc_channels);
+	indio_dev->channels = sunxi_gpadc_channels;
+
+	info->flags = platform_get_device_id(pdev)->driver_data;
+
+	regmap_write(info->regmap, TP_CTRL0, ADC_CLK_DIVIDER(2) |
+					     FS_DIV(7) |
+					     T_ACQ(63));
+	regmap_write(info->regmap, TP_CTRL1, SUN6I_TP_MODE_EN);
+	regmap_write(info->regmap, TP_CTRL3, FILTER_EN | FILTER_TYPE(1));
+	regmap_write(info->regmap, TP_TPR, TEMP_ENABLE(1) | TEMP_PERIOD(1953));
+
+	irq = platform_get_irq_byname(pdev, "TEMP_DATA_PENDING");
+	if (irq < 0) {
+		dev_err(&pdev->dev,
+			"no TEMP_DATA_PENDING interrupt registered\n");
+		return irq;
+	}
+
+	irq = regmap_irq_get_virq(sunxi_gpadc_mfd_dev->regmap_irqc, irq);
+	ret = devm_request_any_context_irq(&pdev->dev, irq,
+					   sunxi_gpadc_temp_data_irq_handler,
+					   0, "temp_data", info);
+	if (ret < 0) {
+		dev_err(&pdev->dev,
+			"could not request TEMP_DATA_PENDING interrupt: %d\n",
+			ret);
+		return ret;
+	}
+
+	info->temp_data_irq = irq;
+	disable_irq(irq);
+
+	irq = platform_get_irq_byname(pdev, "FIFO_DATA_PENDING");
+	if (irq < 0) {
+		dev_err(&pdev->dev,
+			"no FIFO_DATA_PENDING interrupt registered\n");
+		return irq;
+	}
+
+	irq = regmap_irq_get_virq(sunxi_gpadc_mfd_dev->regmap_irqc, irq);
+	ret = devm_request_any_context_irq(&pdev->dev, irq,
+					   sunxi_gpadc_fifo_data_irq_handler,
+					   0, "fifo_data", info);
+	if (ret < 0) {
+		dev_err(&pdev->dev,
+			"could not request FIFO_DATA_PENDING interrupt: %d\n",
+			ret);
+		return ret;
+	}
+
+	info->fifo_data_irq = irq;
+	disable_irq(irq);
+
+	ret = iio_map_array_register(indio_dev, sunxi_gpadc_hwmon_maps);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to register iio map array\n");
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, indio_dev);
+
+	ret = iio_device_register(indio_dev);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "could not register the device\n");
+		iio_map_array_unregister(indio_dev);
+		return ret;
+	}
+
+	dev_info(&pdev->dev, "successfully loaded\n");
+
+	return ret;
+}
+
+static int sunxi_gpadc_remove(struct platform_device *pdev)
+{
+	struct iio_dev *indio_dev = NULL;
+	struct sunxi_gpadc_dev *info = NULL;
+
+	iio_device_unregister(indio_dev);
+	iio_map_array_unregister(indio_dev);
+	info = iio_priv(indio_dev);
+	regmap_write(info->regmap, TP_INT_FIFOC, 0);
+
+	return 0;
+}
+
+static const struct platform_device_id sunxi_gpadc_id[] = {
+	{ "sun4i-a10-gpadc-iio", ARCH_SUN4I },
+	{ "sun5i-a13-gpadc-iio", ARCH_SUN5I },
+	{ "sun6i-a31-gpadc-iio", ARCH_SUN6I },
+	{ /*sentinel*/ },
+};
+
+static struct platform_driver sunxi_gpadc_driver = {
+	.driver = {
+		.name = "sunxi-gpadc-iio",
+	},
+	.id_table = sunxi_gpadc_id,
+	.probe = sunxi_gpadc_probe,
+	.remove = sunxi_gpadc_remove,
+};
+
+module_platform_driver(sunxi_gpadc_driver);
+
+MODULE_DESCRIPTION("ADC driver for sunxi platforms");
+MODULE_AUTHOR("Quentin Schulz <quentin.schulz@...e-electrons.com>");
+MODULE_LICENSE("GPL v2");
-- 
2.5.0

Powered by blists - more mailing lists