linux-kernel - [PATCH] mac80211: util: mesh is not connected properly after recovery

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20160628111546.8932-1-yanivma@ti.com>
Date:	Tue, 28 Jun 2016 14:15:44 +0300
From:	Yaniv Machani <yanivma@...com>
To:	<linux-kernel@...r.kernel.org>
CC:	Maital Hahn <maitalm@...com>,
	Johannes Berg <johannes@...solutions.net>,
	"David S. Miller" <davem@...emloft.net>,
	<linux-wireless@...r.kernel.org>, <netdev@...r.kernel.org>
Subject: [PATCH] mac80211: util: mesh is not connected properly after recovery

From: Maital Hahn <maitalm@...com>

In the reconfigure process for mesh interface, moved the reconfiguration
of the mesh peers to be done only after restarting the beacons,
the same as it is done for AP.

Signed-off-by: Maital Hahn <maitalm@...com>
Acked-by: Yaniv Machani <yanivma@...com>
---
 net/mac80211/util.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 5375a82..2431684 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -1910,6 +1910,7 @@ int ieee80211_reconfig(struct ieee80211_local *local)
 			ieee80211_reconfig_stations(sdata);
 			/* fall through */
 		case NL80211_IFTYPE_AP: /* AP stations are handled later */
+		case NL80211_IFTYPE_MESH_POINT: /* MP peers are handled later */
 			for (i = 0; i < IEEE80211_NUM_ACS; i++)
 				drv_conf_tx(local, sdata, i,
 					    &sdata->tx_conf[i]);
@@ -2013,7 +2014,8 @@ int ieee80211_reconfig(struct ieee80211_local *local)
 		if (!sta->uploaded)
 			continue;
 
-		if (sta->sdata->vif.type != NL80211_IFTYPE_AP)
+		if ((sta->sdata->vif.type != NL80211_IFTYPE_AP) &&
+		    (sta->sdata->vif.type != NL80211_IFTYPE_MESH_POINT))
 			continue;
 
 		for (state = IEEE80211_STA_NOTEXIST;
-- 
2.9.0