| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20160628150946.GO24982@dell>
Date: Tue, 28 Jun 2016 16:09:46 +0100
From: Lee Jones <lee.jones@...aro.org>
To: Neil Armstrong <narmstrong@...libre.com>
Cc: dmitry.torokhov@...il.com, andy.gross@...aro.org,
david.brown@...aro.org, lgirdwood@...il.com, broonie@...nel.org,
a.zummo@...ertech.it, alexandre.belloni@...e-electrons.com,
linux-input@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-msm@...r.kernel.org, linux-soc@...r.kernel.org,
rtc-linux@...glegroups.com
Subject: Re: [PATCH v2 4/5] mfd: qcom-rpm: Add support for pm8018 RPM
Regulator
On Fri, 24 Jun 2016, Neil Armstrong wrote:
> In order to support the Qualcomm MDM9615 SoC, add support for the
> RPM regulator entries in the qcom-rpm driver.
>
> Acked-by: Bjorn Andersson <bjorn.andersson@...aro.org>
> Signed-off-by: Neil Armstrong <narmstrong@...libre.com>
> ---
> Documentation/devicetree/bindings/mfd/qcom-rpm.txt | 1 +
> drivers/mfd/qcom_rpm.c | 51 ++++++++++++++++++++++
> include/dt-bindings/mfd/qcom-rpm.h | 22 ++++++++++
> 3 files changed, 74 insertions(+)
For my own reference:
Acked-by: Lee Jones <lee.jones@...aro.org>
> diff --git a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
> index b98b291..72d68d4 100644
> --- a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
> +++ b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
> @@ -13,6 +13,7 @@ frequencies.
> "qcom,rpm-msm8660"
> "qcom,rpm-msm8960"
> "qcom,rpm-ipq8064"
> + "qcom,rpm-mdm9615"
>
> - reg:
> Usage: required
> diff --git a/drivers/mfd/qcom_rpm.c b/drivers/mfd/qcom_rpm.c
> index 880d469..c309ebe 100644
> --- a/drivers/mfd/qcom_rpm.c
> +++ b/drivers/mfd/qcom_rpm.c
> @@ -390,11 +390,62 @@ static const struct qcom_rpm_data ipq806x_template = {
> .ack_sel_size = 7,
> };
>
> +static const struct qcom_rpm_resource mdm9615_rpm_resource_table[] = {
> + [QCOM_RPM_CXO_CLK] = { 25, 9, 5, 1 },
> + [QCOM_RPM_SYS_FABRIC_CLK] = { 26, 10, 9, 1 },
> + [QCOM_RPM_DAYTONA_FABRIC_CLK] = { 27, 11, 11, 1 },
> + [QCOM_RPM_SFPB_CLK] = { 28, 12, 12, 1 },
> + [QCOM_RPM_CFPB_CLK] = { 29, 13, 13, 1 },
> + [QCOM_RPM_EBI1_CLK] = { 30, 14, 16, 1 },
> + [QCOM_RPM_APPS_FABRIC_HALT] = { 31, 15, 22, 2 },
> + [QCOM_RPM_APPS_FABRIC_MODE] = { 33, 16, 23, 3 },
> + [QCOM_RPM_APPS_FABRIC_IOCTL] = { 36, 17, 24, 1 },
> + [QCOM_RPM_APPS_FABRIC_ARB] = { 37, 18, 25, 27 },
> + [QCOM_RPM_PM8018_SMPS1] = { 64, 19, 30, 2 },
> + [QCOM_RPM_PM8018_SMPS2] = { 66, 21, 31, 2 },
> + [QCOM_RPM_PM8018_SMPS3] = { 68, 23, 32, 2 },
> + [QCOM_RPM_PM8018_SMPS4] = { 70, 25, 33, 2 },
> + [QCOM_RPM_PM8018_SMPS5] = { 72, 27, 34, 2 },
> + [QCOM_RPM_PM8018_LDO1] = { 74, 29, 35, 2 },
> + [QCOM_RPM_PM8018_LDO2] = { 76, 31, 36, 2 },
> + [QCOM_RPM_PM8018_LDO3] = { 78, 33, 37, 2 },
> + [QCOM_RPM_PM8018_LDO4] = { 80, 35, 38, 2 },
> + [QCOM_RPM_PM8018_LDO5] = { 82, 37, 39, 2 },
> + [QCOM_RPM_PM8018_LDO6] = { 84, 39, 40, 2 },
> + [QCOM_RPM_PM8018_LDO7] = { 86, 41, 41, 2 },
> + [QCOM_RPM_PM8018_LDO8] = { 88, 43, 42, 2 },
> + [QCOM_RPM_PM8018_LDO9] = { 90, 45, 43, 2 },
> + [QCOM_RPM_PM8018_LDO10] = { 92, 47, 44, 2 },
> + [QCOM_RPM_PM8018_LDO11] = { 94, 49, 45, 2 },
> + [QCOM_RPM_PM8018_LDO12] = { 96, 51, 46, 2 },
> + [QCOM_RPM_PM8018_LDO13] = { 98, 53, 47, 2 },
> + [QCOM_RPM_PM8018_LDO14] = { 100, 55, 48, 2 },
> + [QCOM_RPM_PM8018_LVS1] = { 102, 57, 49, 1 },
> + [QCOM_RPM_PM8018_NCP] = { 103, 58, 80, 2 },
> + [QCOM_RPM_CXO_BUFFERS] = { 105, 60, 81, 1 },
> + [QCOM_RPM_USB_OTG_SWITCH] = { 106, 61, 82, 1 },
> + [QCOM_RPM_HDMI_SWITCH] = { 107, 62, 83, 1 },
> + [QCOM_RPM_VOLTAGE_CORNER] = { 109, 64, 87, 1 },
> +};
> +
> +static const struct qcom_rpm_data mdm9615_template = {
> + .version = 3,
> + .resource_table = mdm9615_rpm_resource_table,
> + .n_resources = ARRAY_SIZE(mdm9615_rpm_resource_table),
> + .req_ctx_off = 3,
> + .req_sel_off = 11,
> + .ack_ctx_off = 15,
> + .ack_sel_off = 23,
> + .req_sel_size = 4,
> + .ack_sel_size = 7,
> +};
> +
> static const struct of_device_id qcom_rpm_of_match[] = {
> { .compatible = "qcom,rpm-apq8064", .data = &apq8064_template },
> { .compatible = "qcom,rpm-msm8660", .data = &msm8660_template },
> { .compatible = "qcom,rpm-msm8960", .data = &msm8960_template },
> { .compatible = "qcom,rpm-ipq8064", .data = &ipq806x_template },
> + { .compatible = "qcom,rpm-mdm9615", .data = &mdm9615_template },
> { }
> };
> MODULE_DEVICE_TABLE(of, qcom_rpm_of_match);
> diff --git a/include/dt-bindings/mfd/qcom-rpm.h b/include/dt-bindings/mfd/qcom-rpm.h
> index 13a9d4b..54aef5e 100644
> --- a/include/dt-bindings/mfd/qcom-rpm.h
> +++ b/include/dt-bindings/mfd/qcom-rpm.h
> @@ -147,6 +147,28 @@
> #define QCOM_RPM_SMB208_S1b 137
> #define QCOM_RPM_SMB208_S2a 138
> #define QCOM_RPM_SMB208_S2b 139
> +#define QCOM_RPM_PM8018_SMPS1 140
> +#define QCOM_RPM_PM8018_SMPS2 141
> +#define QCOM_RPM_PM8018_SMPS3 142
> +#define QCOM_RPM_PM8018_SMPS4 143
> +#define QCOM_RPM_PM8018_SMPS5 144
> +#define QCOM_RPM_PM8018_LDO1 145
> +#define QCOM_RPM_PM8018_LDO2 146
> +#define QCOM_RPM_PM8018_LDO3 147
> +#define QCOM_RPM_PM8018_LDO4 148
> +#define QCOM_RPM_PM8018_LDO5 149
> +#define QCOM_RPM_PM8018_LDO6 150
> +#define QCOM_RPM_PM8018_LDO7 151
> +#define QCOM_RPM_PM8018_LDO8 152
> +#define QCOM_RPM_PM8018_LDO9 153
> +#define QCOM_RPM_PM8018_LDO10 154
> +#define QCOM_RPM_PM8018_LDO11 155
> +#define QCOM_RPM_PM8018_LDO12 156
> +#define QCOM_RPM_PM8018_LDO13 157
> +#define QCOM_RPM_PM8018_LDO14 158
> +#define QCOM_RPM_PM8018_LVS1 159
> +#define QCOM_RPM_PM8018_NCP 160
> +#define QCOM_RPM_VOLTAGE_CORNER 161
>
> /*
> * Constants used to select force mode for regulators.
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
Powered by blists - more mailing lists