[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <57736DA5.5020005@rock-chips.com>
Date: Wed, 29 Jun 2016 14:41:41 +0800
From: Yakir Yang <ykk@...k-chips.com>
To: Sean Paul <seanpaul@...omium.org>
Cc: Mark Yao <yzq@...k-chips.com>, Inki Dae <inki.dae@...sung.com>,
Jingoo Han <jingoohan1@...il.com>,
Heiko Stuebner <heiko@...ech.de>,
Krzysztof Kozlowski <k.kozlowski@...sung.com>,
linux-samsung-soc <linux-samsung-soc@...r.kernel.org>,
linux-rockchip@...ts.infradead.org,
Daniel Vetter <daniel.vetter@...ll.ch>,
Emil Velikov <emil.l.velikov@...il.com>,
Douglas Anderson <dianders@...omium.org>,
dri-devel <dri-devel@...ts.freedesktop.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Javier Martinez Canillas <javier@....samsung.com>,
Tomasz Figa <tomasz.figa@...omium.com>,
Stéphane Marchesin <marcheu@...omium.org>,
Thierry Reding <treding@...dia.com>,
Dan Carpenter <dan.carpenter@...cle.com>
Subject: Re: [PATCH v3 08/10] drm/rockchip: analogix_dp: correct the connector
display color format and bpc
Sean,
On 06/23/2016 10:19 PM, Sean Paul wrote:
> On Tue, Jun 14, 2016 at 7:46 AM, Yakir Yang <ykk@...k-chips.com> wrote:
>> Rockchip VOP couldn't output YUV video format for eDP controller, so
>> when driver detect connector support YUV video format, we need to hack
>> it down to RGB888.
>>
>> Signed-off-by: Yakir Yang <ykk@...k-chips.com>
>> Acked-by: Mark Yao <mark.yao@...k-chips.com>
>> ---
>> Changes in v3:
>> - Hook the connector's color_formats in .get_modes directly. (Tomasz, reviewed at Google Gerrit)
>> [https://chromium-review.googlesource.com/#/c/346317/15]
>> - Add the acked flag from Mark.
>>
>> Changes in v2: None
>>
>> drivers/gpu/drm/rockchip/analogix_dp-rockchip.c | 17 +++++++++++++++++
>> 1 file changed, 17 insertions(+)
>>
>> diff --git a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
>> index da2e844..95a6f60 100644
>> --- a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
>> +++ b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
>> @@ -102,6 +102,22 @@ static int rockchip_dp_powerdown(struct analogix_dp_plat_data *plat_data)
>> return 0;
>> }
>>
>> +static int rockchip_dp_get_modes(struct analogix_dp_plat_data *plat_data,
>> + struct drm_connector *connector)
>> +{
>> + struct drm_display_info *di = &connector->display_info;
>> +
>> + if (di->color_formats & DRM_COLOR_FORMAT_YCRCB444 ||
>> + di->color_formats & DRM_COLOR_FORMAT_YCRCB422) {
>> + di->color_formats &= ~(DRM_COLOR_FORMAT_YCRCB422 |
>> + DRM_COLOR_FORMAT_YCRCB444);
>> + di->color_formats |= DRM_COLOR_FORMAT_RGB444;
>> + di->bpc = 8;
> Probably a stupid question, but are you guaranteed that the panel will
> support this color format?
Hmm... I'm not sure, but it works on my several panels. I guess RGB is
more common then YUV, so if panel support YUV format, it should support
RGB888 too.
>> + }
>> +
> I think this can be simplified as follows:
>
> /* A comment here about why we're doing this */
> u32 mask = DRM_COLOR_FORMAT_YCRCB444 | DRM_COLOR_FORMAT_YCRCB422;
> if ((di->color_formats & mask)) {
> DRM_DEBUG_KMS("Swapping display color format from YUV to RGB\n");
> di->color_formats &= ~mask;
> di->color_formats |= DRM_COLOR_FORMAT_RGB444;
> di->bpc = 8;
> }
Done, good idea.
Thanks,
- Yakir
>> + return 0;
>> +}
>> +
>> static bool
>> rockchip_dp_drm_encoder_mode_fixup(struct drm_encoder *encoder,
>> const struct drm_display_mode *mode,
>> @@ -313,6 +329,7 @@ static int rockchip_dp_bind(struct device *dev, struct device *master,
>> dp->plat_data.subdev_type = dp_data->chip_type;
>> dp->plat_data.power_on = rockchip_dp_poweron;
>> dp->plat_data.power_off = rockchip_dp_powerdown;
>> + dp->plat_data.get_modes = rockchip_dp_get_modes;
>>
>> return analogix_dp_bind(dev, dp->drm_dev, &dp->plat_data);
>> }
>> --
>> 1.9.1
>>
>>
>> _______________________________________________
>> dri-devel mailing list
>> dri-devel@...ts.freedesktop.org
>> https://lists.freedesktop.org/mailman/listinfo/dri-devel
>
>
Powered by blists - more mailing lists