| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20160629094347.GL25236@shlinux2>
Date: Wed, 29 Jun 2016 17:43:47 +0800
From: Peter Chen <hzpeterchen@...il.com>
To: Stephen Boyd <stephen.boyd@...aro.org>
Cc: Peter Chen <peter.chen@....com>, Felipe Balbi <balbi@...nel.org>,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-usb@...r.kernel.org, Li Jun <jun.li@....com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Subject: Re: [PATCH] usb: otg-fsm: Cancel HNP polling work when not used
On Mon, Jun 27, 2016 at 06:18:27PM -0700, Stephen Boyd wrote:
> We setup the HNP polling worker, but we never stop it. The OTG
> state machine can go round and round and keep reinitializing the
> worker even while it's actively running. That's bad, and debug
> objects catches it. Fix this by canceling the work when we leave
> the A_HOST or B_HOST states.
>
> [otg_set_state] Set state: a_wait_bcon
> usb 2-1: USB disconnect, device number 2
> [otg_statemachine] quit statemachine, changed = 1
> [otg_set_state] Set state: a_host
> <HNP Polling started>
> [otg_statemachine] quit statemachine, changed = 1
> usb 2-1: new low-speed USB device number 3 using ci_hdrc
> usb 2-1: New USB device found, idVendor=03f0, idProduct=134a
> usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> usb 2-1: Product: HP USB Optical Mouse
> usb 2-1: Manufacturer: PixArt
> input: PixArt HP USB Optical Mouse as /devices/platform/soc/f9a55000.usb/ci_hdrc.0/usb2/2-1/2-1:1.0/0003:03F0:134A.0002/input/input1
> hid-generic 0003:03F0:134A.0002: input: USB HID v1.11 Mouse [PixArt HP USB Optical Mouse] on usb-ci_hdrc.0-1/input0
> [otg_set_state] Set state: a_wait_bcon
> usb 2-1: USB disconnect, device number 3
> [otg_statemachine] quit statemachine, changed = 1
> [otg_set_state] Set state: a_host
> <HNP Polling started>
> ------------[ cut here ]------------
> WARNING: CPU: 2 PID: 95 at lib/debugobjects.c:263 debug_print_object+0x98/0xc0
> ODEBUG: init active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x2c
> Modules linked in: phy_qcom_usb_hsic phy_qcom_usb_hs ci_hdrc_msm ci_hdrc
> CPU: 2 PID: 95 Comm: kworker/u8:1 Not tainted 4.7.0-rc1-00043-g1f22f3b65c44-dirty #442
> Hardware name: Qualcomm (Flattened Device Tree)
> Workqueue: ci_otg ci_otg_work [ci_hdrc]
> [<c031067c>] (unwind_backtrace) from [<c030cbf0>] (show_stack+0x20/0x24)
> [<c030cbf0>] (show_stack) from [<c060cec8>] (dump_stack+0x7c/0x9c)
> [<c060cec8>] (dump_stack) from [<c031f8a4>] (__warn+0xe4/0x110)
> [<c031f8a4>] (__warn) from [<c031f9a0>] (warn_slowpath_fmt+0x48/0x50)
> [<c031f9a0>] (warn_slowpath_fmt) from [<c06289c0>] (debug_print_object+0x98/0xc0)
> [<c06289c0>] (debug_print_object) from [<c0628bbc>] (__debug_object_init+0xcc/0x3bc)
> [<c0628bbc>] (__debug_object_init) from [<c0628ed0>] (debug_object_init+0x24/0x2c)
> [<c0628ed0>] (debug_object_init) from [<c037ceb0>] (init_timer_key+0x24/0x120)
> [<c037ceb0>] (init_timer_key) from [<c07b3f1c>] (otg_start_hnp_polling+0x7c/0xbc)
> [<c07b3f1c>] (otg_start_hnp_polling) from [<c074543c>] (otg_set_state+0x740/0xc20)
> [<c074543c>] (otg_set_state) from [<c0745d98>] (otg_statemachine+0x47c/0x4ac)
> [<c0745d98>] (otg_statemachine) from [<bf00c808>] (ci_otg_fsm_work+0x48/0x1a0 [ci_hdrc])
> [<bf00c808>] (ci_otg_fsm_work [ci_hdrc]) from [<bf007428>] (ci_otg_work+0xd4/0x218 [ci_hdrc])
> [<bf007428>] (ci_otg_work [ci_hdrc]) from [<c0338cac>] (process_one_work+0x154/0x4b4)
> [<c0338cac>] (process_one_work) from [<c033908c>] (worker_thread+0x38/0x4d0)
> [<c033908c>] (worker_thread) from [<c033f0a0>] (kthread+0xe8/0x104)
> [<c033f0a0>] (kthread) from [<c0308ed8>] (ret_from_fork+0x14/0x3c)
>
> Cc: Li Jun <jun.li@....com>
> Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
> Fixes: ae57e97a9521 ("usb: common: otg-fsm: add HNP polling support")
> Signed-off-by: Stephen Boyd <stephen.boyd@...aro.org>
> ---
> drivers/usb/common/usb-otg-fsm.c | 14 ++++++++++++++
> 1 file changed, 14 insertions(+)
>
> diff --git a/drivers/usb/common/usb-otg-fsm.c b/drivers/usb/common/usb-otg-fsm.c
> index 9059b7dc185e..73eec8c12235 100644
> --- a/drivers/usb/common/usb-otg-fsm.c
> +++ b/drivers/usb/common/usb-otg-fsm.c
> @@ -61,6 +61,18 @@ static int otg_set_protocol(struct otg_fsm *fsm, int protocol)
> return 0;
> }
>
> +static void otg_stop_hnp_polling(struct otg_fsm *fsm)
> +{
> + /*
> + * The memory of host_req_flag should be allocated by
> + * controller driver, otherwise, hnp polling is not started.
> + */
> + if (!fsm->host_req_flag)
> + return;
> +
> + cancel_delayed_work_sync(&fsm->hnp_polling_work);
> +}
> +
> /* Called when leaving a state. Do state clean up jobs here */
> static void otg_leave_state(struct otg_fsm *fsm, enum usb_otg_state old_state)
> {
> @@ -84,6 +96,7 @@ static void otg_leave_state(struct otg_fsm *fsm, enum usb_otg_state old_state)
> fsm->b_ase0_brst_tmout = 0;
> break;
> case OTG_STATE_B_HOST:
> + otg_stop_hnp_polling(fsm);
> break;
> case OTG_STATE_A_IDLE:
> fsm->adp_prb = 0;
> @@ -97,6 +110,7 @@ static void otg_leave_state(struct otg_fsm *fsm, enum usb_otg_state old_state)
> fsm->a_wait_bcon_tmout = 0;
> break;
> case OTG_STATE_A_HOST:
> + otg_stop_hnp_polling(fsm);
> otg_del_timer(fsm, A_WAIT_ENUM);
> break;
> case OTG_STATE_A_SUSPEND:
> --
It introduces circular locking after applying it, otg_statemachine calls
otg_leave_state, and otg_leave_state calls otg_statemachine again due
to flush work, see below dump:
I suggest moving initialization/flush hnp polling work to chipidea driver.
[ 183.086987] ======================================================
[ 183.093183] [ INFO: possible circular locking dependency detected ]
[ 183.099471] 4.7.0-rc4-00012-gf1f333f-dirty #856 Not tainted
[ 183.105059] -------------------------------------------------------
[ 183.111341] kworker/0:2/114 is trying to acquire lock:
[ 183.116492] (&ci->fsm.lock){+.+.+.}, at: [<806118dc>]
otg_statemachine+0x20/0x470
[ 183.124199]
[ 183.124199] but task is already holding lock:
[ 183.130052] ((&(&fsm->hnp_polling_work)->work)){+.+...}, at:
[<80140368>] process_one_work+0x128/0x418
[ 183.139568]
[ 183.139568] which lock already depends on the new lock.
[ 183.139568]
[ 183.147765]
[ 183.147765] the existing dependency chain (in reverse order) is:
[ 183.155265]
-> #1 ((&(&fsm->hnp_polling_work)->work)){+.+...}:
[ 183.161371] [<8013e97c>] flush_work+0x44/0x234
[ 183.166469] [<801411a8>] __cancel_work_timer+0x98/0x1c8
[ 183.172347] [<80141304>] cancel_delayed_work_sync+0x14/0x18
[ 183.178570] [<80610ef8>] otg_set_state+0x290/0xc54
[ 183.184011] [<806119d0>] otg_statemachine+0x114/0x470
[ 183.189712] [<8060a590>] ci_otg_fsm_work+0x40/0x190
[ 183.195239] [<806054d0>] ci_otg_work+0xcc/0x1e4
[ 183.200430] [<801403d4>] process_one_work+0x194/0x418
[ 183.206136] [<8014068c>] worker_thread+0x34/0x4fc
[ 183.211489] [<80146d08>] kthread+0xdc/0xf8
[ 183.216238] [<80108ab0>] ret_from_fork+0x14/0x24
[ 183.221514]
-> #0 (&ci->fsm.lock){+.+.+.}:
[ 183.225880] [<8016ff94>] lock_acquire+0x78/0x98
[ 183.231062] [<80947c18>] mutex_lock_nested+0x54/0x3ec
[ 183.236773] [<806118dc>] otg_statemachine+0x20/0x470
[ 183.242388] [<80611df4>] otg_hnp_polling_work+0xc8/0x1a4
[ 183.248352] [<801403d4>] process_one_work+0x194/0x418
[ 183.254055] [<8014068c>] worker_thread+0x34/0x4fc
[ 183.259409] [<80146d08>] kthread+0xdc/0xf8
[ 183.264154] [<80108ab0>] ret_from_fork+0x14/0x24
[ 183.269424]
[ 183.269424] other info that might help us debug this:
[ 183.269424]
[ 183.277451] Possible unsafe locking scenario:
[ 183.277451]
[ 183.283389] CPU0 CPU1
[ 183.287931] ---- ----
[ 183.292473] lock((&(&fsm->hnp_polling_work)->work));
[ 183.297665] lock(&ci->fsm.lock);
[ 183.303639]
lock((&(&fsm->hnp_polling_work)->work));
[ 183.311347] lock(&ci->fsm.lock);
[ 183.314801]
[ 183.314801] *** DEADLOCK ***
[ 183.314801]
[ 183.320745] 2 locks held by kworker/0:2/114:
[ 183.325028] #0: ("events"){.+.+.+}, at: [<80140368>]
process_one_work+0x128/0x418
[ 183.332817] #1:
((&(&fsm->hnp_polling_work)->work)){+.+...}, at: [<80140368>]
process_one_work+0x128/0x418
[ 183.342772]
[ 183.342772] stack backtrace:
[ 183.347160] CPU: 0 PID: 114 Comm: kworker/0:2 Not tainted
4.7.0-rc4-00012-gf1f333f-dirty #856
[ 183.355699] Hardware name: Freescale i.MX6 SoloX (Device
Tree)
[ 183.361561] Workqueue: events otg_hnp_polling_work
[ 183.366388] Backtrace:
[ 183.368891] [<8010d014>] (dump_backtrace) from [<8010d208>]
(show_stack+0x18/0x1c)
[ 183.376479] r6:600001d3 r5:00000000 r4:80f21d3c r3:00000002
[ 183.382265] [<8010d1f0>] (show_stack) from [<803f158c>]
(dump_stack+0xb4/0xe8)
[ 183.389521] [<803f14d8>] (dump_stack) from [<8016c2b4>]
(print_circular_bug+0x1d0/0x314)
[ 183.397625] r10:81760be8 r9:00000000 r8:bdb7bc00 r7:bdb7c0e0
r6:810c7074 r5:810ea174
[ 183.405585] r4:810c7074 r3:00000002
[ 183.409231] [<8016c0e4>] (print_circular_bug) from
[<8016fa8c>] (__lock_acquire+0x196c/0x1ab4)
[ 183.417857] r10:80f21e1c r9:00000002 r8:00000001 r7:8174e47c
r6:00000002 r5:bdb7bc00
[ 183.425814] r4:00000026 r3:bdb7c0c0
[ 183.429459] [<8016e120>] (__lock_acquire) from [<8016ff94>]
(lock_acquire+0x78/0x98)
[ 183.437218] r10:bdb701cc r9:bdbafeb0 r8:00001388 r7:00000001
r6:806118dc r5:60000153
[ 183.445175] r4:00000000
[ 183.447758] [<8016ff1c>] (lock_acquire) from [<80947c18>]
(mutex_lock_nested+0x54/0x3ec)
[ 183.455864] r7:bdb7bc00 r6:8174e47c r5:806118dc r4:00000000
[ 183.461645] [<80947bc4>] (mutex_lock_nested) from
[<806118dc>] (otg_statemachine+0x20/0x470)
[ 183.470097] r10:00000001 r9:bdbafeb0 r8:00001388 r7:bd3ef000
r6:00000009 r5:bdb701cc
[ 183.478057] r4:bdb70120
[ 183.480641] [<806118bc>] (otg_statemachine) from [<80611df4>]
(otg_hnp_polling_work+0xc8/0x1a4)
[ 183.489354] r5:bdb70214 r4:00000000
[ 183.493006] [<80611d2c>] (otg_hnp_polling_work) from
[<801403d4>] (process_one_work+0x194/0x418)
[ 183.501805] r8:00000000 r7:be7c4400 r6:be7c0ec0 r5:bdb70214
r4:bdb2d600
[ 183.508650] [<80140240>] (process_one_work) from [<8014068c>]
(worker_thread+0x34/0x4fc)
[ 183.516754] r10:bdb2d600 r9:be7c0ec0 r8:80f02100 r7:be7c0ef4
r6:00000008 r5:bdb2d618
[ 183.524712] r4:be7c0ec0
[ 183.527297] [<80140658>] (worker_thread) from [<80146d08>]
(kthread+0xdc/0xf8)
[ 183.534534] r10:00000000 r9:00000000 r8:00000000 r7:80140658
r6:bdb2d600 r5:bdb51000
[ 183.542492] r4:00000000
[ 183.545081] [<80146c2c>] (kthread) from [<80108ab0>]
(ret_from_fork+0x14/0x24)
[ 183.552317] r7:00000000 r6:00000000 r5:80146c2c r4:bdb51000
--
Best Regards,
Peter Chen
Powered by blists - more mailing lists