lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1467207667-15768-11-git-send-email-ysato@users.sourceforge.jp>
Date:	Wed, 29 Jun 2016 22:40:55 +0900
From:	Yoshinori Sato <ysato@...rs.sourceforge.jp>
To:	linux-sh@...r.kernel.org, linux-kernel@...r.kernel.org
Cc:	Yoshinori Sato <ysato@...rs.sourceforge.jp>
Subject: [PATCH v4 10/22] sh: Add board specific initialize of of-generic

Changes v4
none

Signed-off-by: Yoshinori Sato <ysato@...rs.sourceforge.jp>
---
 arch/sh/boards/of-generic.c | 64 +++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 64 insertions(+)

diff --git a/arch/sh/boards/of-generic.c b/arch/sh/boards/of-generic.c
index 2d3cda3..709006a 100644
--- a/arch/sh/boards/of-generic.c
+++ b/arch/sh/boards/of-generic.c
@@ -16,9 +16,15 @@
 #include <linux/irqchip.h>
 #include <linux/clk-provider.h>
 #include <linux/memblock.h>
+#include <linux/sm501-regs.h>
 #include <asm/machvec.h>
 #include <asm/rtc.h>
 
+struct model_setup {
+	char *name;
+	void (*fn)(void);
+};
+
 #ifdef CONFIG_SMP
 
 static void dummy_smp_setup(void)
@@ -125,10 +131,61 @@ static void __init sh_of_time_init(void)
 	clocksource_probe();
 }
 
+#define PA_LED		0xb0000001	/* LED Control Register */
+#define PA_SHUTDOWN	0xb0000003	/* Shutdown Control Register */
+static void landisk_power_off(void)
+{
+	__raw_writeb(0x01, PA_SHUTDOWN);
+}
+
+static void __init landisk_setup(void)
+{
+	/* LED ON */
+	__raw_writeb(__raw_readb(PA_LED) | 0x03, PA_LED);
+	pm_power_off = landisk_power_off;
+}
+
+#define PA_POWOFF	0xa4000030	/* Board Power OFF control */
+#define PA_OUTPORT	0xa4000036	/* LED control */
+static void rts7751r2d_power_off(void)
+{
+	__raw_writew(0x0001, PA_POWOFF);
+}
+
+static void __init r2dplus_setup(void)
+{
+	void __iomem *sm501_reg;
+
+	__raw_writew(0x0000, PA_OUTPORT);
+	pm_power_off = rts7751r2d_power_off;
+
+	/* sm501 dram configuration:
+	 * ColSizeX = 11 - External Memory Column Size: 256 words.
+	 * APX = 1 - External Memory Active to Pre-Charge Delay: 7 clocks.
+	 * RstX = 1 - External Memory Reset: Normal.
+	 * Rfsh = 1 - Local Memory Refresh to Command Delay: 12 clocks.
+	 * BwC =  1 - Local Memory Block Write Cycle Time: 2 clocks.
+	 * BwP =  1 - Local Memory Block Write to Pre-Charge Delay: 1 clock.
+	 * AP = 1 - Internal Memory Active to Pre-Charge Delay: 7 clocks.
+	 * Rst = 1 - Internal Memory Reset: Normal.
+	 * RA = 1 - Internal Memory Remain in Active State: Do not remain.
+	 */
+
+	sm501_reg = (void __iomem *)0xb3e00000 + SM501_DRAM_CONTROL;
+	writel(readl(sm501_reg) | 0x00f107c0, sm501_reg);
+}
+
+static const struct model_setup model_setup_table[] __initconst = {
+	{ .name = "I/O DATA HDL-U", .fn = landisk_setup, },
+	{ .name = "Renesas RTS7751R2D+", .fn = r2dplus_setup, },
+	{},
+};
+
 static void __init sh_of_setup(char **cmdline_p)
 {
 	struct device_node *root;
 	struct device_node *cpu;
+	const struct model_setup *setup;
 	u32 freq;
 
 	board_time_init = sh_of_time_init;
@@ -145,6 +202,13 @@ static void __init sh_of_setup(char **cmdline_p)
 	cpu = of_find_node_by_name(NULL, "cpu");
 	if (!of_property_read_u32(cpu, "clock-frequency", &freq))
 		preset_lpj = freq / CONFIG_HZ / 2;
+
+	for (setup = model_setup_table; setup->name; setup++) {
+		if (strcmp(setup->name, sh_mv.mv_name) == 0) {
+			setup->fn();
+			break;
+		}
+	}
 }
 
 static int sh_of_irq_demux(int irq)
-- 
2.7.0

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ