linux-kernel - [PATCH v5 1/3] Documentation: mfd: LP873X: Add information for the mfd driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1467215067-6486-2-git-send-email-j-keerthy@ti.com>
Date:	Wed, 29 Jun 2016 21:14:25 +0530
From:	Keerthy <j-keerthy@...com>
To:	<linus.walleij@...aro.org>, <gnurou@...il.com>,
	<lee.jones@...aro.org>
CC:	<linux-omap@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
	<devicetree@...r.kernel.org>, <linux-gpio@...r.kernel.org>,
	<broonie@...nel.org>, <robh+dt@...nel.org>, <j-keerthy@...com>,
	<tony@...mide.com>
Subject: [PATCH v5 1/3] Documentation: mfd: LP873X: Add information for the mfd driver

The lp873x series of PMICs have a bunch of regulators and a couple
of GPO(General Purpose Outputs).
Add information for the mfd and regulator drivers.

Acked-by: Rob Herring <robh@...nel.org>
Signed-off-by: Keerthy <j-keerthy@...com>
---

Changes in v4:

  * Added the GPIO properties.

Changes in v3:

  * Changed the example node lable to pmic from lp8733.

 Documentation/devicetree/bindings/mfd/lp873x.txt | 59 ++++++++++++++++++++++++
 1 file changed, 59 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/lp873x.txt

diff --git a/Documentation/devicetree/bindings/mfd/lp873x.txt b/Documentation/devicetree/bindings/mfd/lp873x.txt
new file mode 100644
index 0000000..1377c25
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/lp873x.txt
@@ -0,0 +1,59 @@
+TI LP873X MFD driver
+
+Required properties:
+  - compatible:		"ti,lp8732", "ti,lp8733"
+  - reg:		I2C slave address.
+  - gpio-controller :	Marks the device node as a GPIO Controller.
+  - #gpio-cells	:	Should be two.  The first cell is the pin number and
+			the second cell is used to specify flags.
+			See ../gpio/gpio.txt for more information.
+  - regulators: :	List of child nodes that specify the regulator
+			initialization data.
+Example:
+
+pmic: lp8733@60 {
+	compatible = "ti,lp8733";
+	reg = <0x60>;
+	gpio-controller;
+	#gpio-cells = <2>;
+
+	regulators {
+		lp8733_buck0: buck0 {
+			regulator-name = "lp8733-buck0";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <1400000>;
+			regulator-min-microamp = <1500000>;
+			regulator-max-microamp = <4000000>;
+			regulator-ramp-delay = <10000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		lp8733_buck1: buck1 {
+			regulator-name = "lp8733-buck1";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <1400000>;
+			regulator-min-microamp = <1500000>;
+			regulator-max-microamp = <4000000>;
+			regulator-ramp-delay = <10000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		lp8733_ldo0: ldo0 {
+			regulator-name = "lp8733-ldo0";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		lp8733_ldo1: ldo1 {
+			regulator-name = "lp8733-ldo1";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+	};
+};
-- 
1.9.1