[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1467224153-22873-4-git-send-email-fu.wei@linaro.org>
Date: Thu, 30 Jun 2016 02:15:46 +0800
From: fu.wei@...aro.org
To: rjw@...ysocki.net, lenb@...nel.org, daniel.lezcano@...aro.org,
tglx@...utronix.de, marc.zyngier@....com, hanjun.guo@...aro.org
Cc: linux-arm-kernel@...ts.infradead.org, linaro-acpi@...ts.linaro.org,
linux-kernel@...r.kernel.org, linux-acpi@...r.kernel.org,
rruigrok@...eaurora.org, harba@...eaurora.org, cov@...eaurora.org,
timur@...eaurora.org, graeme.gregory@...aro.org,
al.stone@...aro.org, jcm@...hat.com, wei@...hat.com, arnd@...db.de,
wim@...ana.be, catalin.marinas@....com, will.deacon@....com,
Suravee.Suthikulpanit@....com, leo.duran@....com,
Fu Wei <fu.wei@...aro.org>
Subject: [PATCH v6 03/10] clocksource/drivers/arm_arch_timer: Improve printk relevant code
From: Fu Wei <fu.wei@...aro.org>
This patch defines pr_fmt(fmt) for all pr_* functions,
then the pr_* don't need to add "arch_timer:" everytime.
Also delete some Blank Spaces in arch_timer_banner,
according to the suggestion from checkpatch.pl.
No functional change.
Signed-off-by: Fu Wei <fu.wei@...aro.org>
---
drivers/clocksource/arm_arch_timer.c | 52 +++++++++++++++++++-----------------
1 file changed, 27 insertions(+), 25 deletions(-)
diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
index 966c574..9540e9d 100644
--- a/drivers/clocksource/arm_arch_timer.c
+++ b/drivers/clocksource/arm_arch_timer.c
@@ -29,6 +29,9 @@
#include <clocksource/arm_arch_timer.h>
+#undef pr_fmt
+#define pr_fmt(fmt) "arch_timer: " fmt
+
#define CNTTIDR 0x08
#define CNTTIDR_VIRT(n) (BIT(1) << ((n) * 4))
@@ -388,24 +391,24 @@ arch_timer_detect_rate(void __iomem *cntbase, struct device_node *np)
/* Check the timer frequency. */
if (arch_timer_rate == 0)
- pr_warn("Architected timer frequency not available\n");
+ pr_warn("frequency not available\n");
}
static void arch_timer_banner(unsigned type)
{
- pr_info("Architected %s%s%s timer(s) running at %lu.%02luMHz (%s%s%s).\n",
- type & ARCH_CP15_TIMER ? "cp15" : "",
- type == (ARCH_CP15_TIMER | ARCH_MEM_TIMER) ? " and " : "",
- type & ARCH_MEM_TIMER ? "mmio" : "",
- (unsigned long)arch_timer_rate / 1000000,
- (unsigned long)(arch_timer_rate / 10000) % 100,
- type & ARCH_CP15_TIMER ?
- (arch_timer_uses_ppi == VIRT_PPI) ? "virt" : "phys" :
- "",
- type == (ARCH_CP15_TIMER | ARCH_MEM_TIMER) ? "/" : "",
- type & ARCH_MEM_TIMER ?
- arch_timer_mem_use_virtual ? "virt" : "phys" :
- "");
+ pr_info("%s%s%s timer(s) running at %lu.%02luMHz (%s%s%s).\n",
+ type & ARCH_CP15_TIMER ? "cp15" : "",
+ type == (ARCH_CP15_TIMER | ARCH_MEM_TIMER) ? " and " : "",
+ type & ARCH_MEM_TIMER ? "mmio" : "",
+ (unsigned long)arch_timer_rate / 1000000,
+ (unsigned long)(arch_timer_rate / 10000) % 100,
+ type & ARCH_CP15_TIMER ?
+ (arch_timer_uses_ppi == VIRT_PPI) ? "virt" : "phys" :
+ "",
+ type == (ARCH_CP15_TIMER | ARCH_MEM_TIMER) ? "/" : "",
+ type & ARCH_MEM_TIMER ?
+ arch_timer_mem_use_virtual ? "virt" : "phys" :
+ "");
}
u32 arch_timer_get_rate(void)
@@ -498,7 +501,7 @@ static void __init arch_counter_register(unsigned type)
static void arch_timer_stop(struct clock_event_device *clk)
{
- pr_debug("arch_timer_teardown disable IRQ%d cpu #%d\n",
+ pr_debug("teardown, disable IRQ%d cpu #%d\n",
clk->irq, smp_processor_id());
disable_percpu_irq(arch_timer_ppi[arch_timer_uses_ppi]);
@@ -597,8 +600,7 @@ static int __init arch_timer_register(void)
}
if (err) {
- pr_err("arch_timer: can't register interrupt %d (%d)\n",
- ppi, err);
+ pr_err("can't register interrupt %d (%d)\n", ppi, err);
goto out_free;
}
@@ -650,7 +652,7 @@ static int __init arch_timer_mem_register(void __iomem *base, unsigned int irq)
ret = request_irq(irq, func, IRQF_TIMER, "arch_mem_timer", &t->evt);
if (ret) {
- pr_err("arch_timer: Failed to request mem timer irq\n");
+ pr_err("Failed to request mem timer irq\n");
kfree(t);
}
@@ -727,7 +729,7 @@ static void __init arch_timer_init(void)
}
if (!has_ppi) {
- pr_warn("arch_timer: No interrupt available, giving up\n");
+ pr_warn("No interrupt available, giving up\n");
return;
}
}
@@ -743,7 +745,7 @@ static void __init arch_timer_of_init(struct device_node *np)
int i;
if (arch_timers_present & ARCH_CP15_TIMER) {
- pr_warn("arch_timer: multiple nodes in dt, skipping\n");
+ pr_warn("multiple nodes in dt, skipping\n");
return;
}
@@ -778,7 +780,7 @@ static void __init arch_timer_mem_init(struct device_node *np)
arch_timers_present |= ARCH_MEM_TIMER;
cntctlbase = of_iomap(np, 0);
if (!cntctlbase) {
- pr_err("arch_timer: Can't find CNTCTLBase\n");
+ pr_err("Can't find CNTCTLBase\n");
return;
}
@@ -793,7 +795,7 @@ static void __init arch_timer_mem_init(struct device_node *np)
u32 cntacr;
if (of_property_read_u32(frame, "frame-number", &n)) {
- pr_err("arch_timer: Missing frame-number\n");
+ pr_err("Missing frame-number\n");
of_node_put(frame);
goto out;
}
@@ -821,7 +823,7 @@ static void __init arch_timer_mem_init(struct device_node *np)
base = arch_counter_base = of_iomap(best_frame, 0);
if (!base) {
- pr_err("arch_timer: Can't map frame's registers\n");
+ pr_err("Can't map frame's registers\n");
goto out;
}
@@ -831,7 +833,7 @@ static void __init arch_timer_mem_init(struct device_node *np)
irq = irq_of_parse_and_map(best_frame, PHYS_SPI);
if (!irq) {
- pr_err("arch_timer: Frame missing %s irq",
+ pr_err("Frame missing %s irq",
arch_timer_mem_use_virtual ? "virt" : "phys");
goto out;
}
@@ -869,7 +871,7 @@ static int __init arch_timer_acpi_init(struct acpi_table_header *table)
struct acpi_table_gtdt *gtdt;
if (arch_timers_present & ARCH_CP15_TIMER) {
- pr_warn("arch_timer: already initialized, skipping\n");
+ pr_warn("already initialized, skipping\n");
return -EINVAL;
}
--
2.5.5
Powered by blists - more mailing lists