linux-kernel - [PATCH V3 4/8] clk: core: support clocks which requires parents enable (part 2)

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1467279078-2330-5-git-send-email-aisheng.dong@nxp.com>
Date:	Thu, 30 Jun 2016 17:31:14 +0800
From:	Dong Aisheng <aisheng.dong@....com>
To:	<linux-clk@...r.kernel.org>
CC:	<linux-kernel@...r.kernel.org>, <sboyd@...eaurora.org>,
	<mturquette@...libre.com>, <shawnguo@...nel.org>,
	<linux-arm-kernel@...ts.infradead.org>, <aisheng.dong@....com>,
	<anson.huang@....com>
Subject: [PATCH V3 4/8] clk: core: support clocks which requires parents enable (part 2)

On Freescale i.MX7D platform, all clocks operations, including
enable/disable, rate change and re-parent, requires its parent clock on.
Current clock core can not support it well.
This patch adding flag CLK_OPS_PARENT_ENABLE to handle this special case in
clock core that enable its parent clock firstly for each operation and
disable it later after operation complete.

The patch part 2 fixes set clock rate and set parent while its parent
is off. The most special case is for set_parent() operation which requires
all parents including both old and new one to be enabled at the same time
during the operation.

Cc: Michael Turquette <mturquette@...libre.com>
Cc: Stephen Boyd <sboyd@...eaurora.org>
Cc: Shawn Guo <shawnguo@...nel.org>
Signed-off-by: Dong Aisheng <aisheng.dong@....com>
---
 drivers/clk/clk.c | 48 +++++++++++++++++++++++++++++++++---------------
 1 file changed, 33 insertions(+), 15 deletions(-)

diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index e3bd28c9ef28..9bac36a5fdb3 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -1172,7 +1172,9 @@ static struct clk_core *__clk_set_parent_before(struct clk_core *core,
 	struct clk_core *old_parent = core->parent;
 
 	/*
-	 * Migrate prepare state between parents and prevent race with
+	 * 1. enable parents for CLK_OPS_PARENT_ENABLE clock
+	 *
+	 * 2. Migrate prepare state between parents and prevent race with
 	 * clk_enable().
 	 *
 	 * If the clock is not prepared, then a race with
@@ -1188,12 +1190,17 @@ static struct clk_core *__clk_set_parent_before(struct clk_core *core,
 	 *
 	 * See also: Comment for clk_set_parent() below.
 	 */
+
+	/* enable old_parent & parent if CLK_OPS_PARENT_ENABLE is set */
+	if (core->flags & CLK_OPS_PARENT_ENABLE) {
+		clk_core_prepare_enable(old_parent);
+		clk_core_prepare_enable(parent);
+	}
+
+	/* migrate prepare count if > 0 */
 	if (core->prepare_count) {
-		clk_core_prepare(parent);
-		flags = clk_enable_lock();
-		clk_core_enable(parent);
-		clk_core_enable(core);
-		clk_enable_unlock(flags);
+		clk_core_prepare_enable(parent);
+		clk_core_enable_lock(core);
 	}
 
 	/* update the clk tree topology */
@@ -1208,18 +1215,19 @@ static void __clk_set_parent_after(struct clk_core *core,
 				   struct clk_core *parent,
 				   struct clk_core *old_parent)
 {
-	unsigned long flags;
-
 	/*
 	 * Finish the migration of prepare state and undo the changes done
 	 * for preventing a race with clk_enable().
 	 */
 	if (core->prepare_count) {
-		flags = clk_enable_lock();
-		clk_core_disable(core);
-		clk_core_disable(old_parent);
-		clk_enable_unlock(flags);
-		clk_core_unprepare(old_parent);
+		clk_core_disable_lock(core);
+		clk_core_disable_unprepare(old_parent);
+	}
+
+	/* re-balance ref counting if CLK_OPS_PARENT_ENABLE is set */
+	if (core->flags & CLK_OPS_PARENT_ENABLE) {
+		clk_core_disable_unprepare(parent);
+		clk_core_disable_unprepare(old_parent);
 	}
 }
 
@@ -1466,13 +1474,17 @@ static void clk_change_rate(struct clk_core *core)
 	unsigned long best_parent_rate = 0;
 	bool skip_set_rate = false;
 	struct clk_core *old_parent;
+	struct clk_core *parent = NULL;
 
 	old_rate = core->rate;
 
-	if (core->new_parent)
+	if (core->new_parent) {
+		parent = core->new_parent;
 		best_parent_rate = core->new_parent->rate;
-	else if (core->parent)
+	} else if (core->parent) {
+		parent = core->parent;
 		best_parent_rate = core->parent->rate;
+	}
 
 	if (core->flags & CLK_SET_RATE_UNGATE) {
 		unsigned long flags;
@@ -1502,6 +1514,9 @@ static void clk_change_rate(struct clk_core *core)
 
 	trace_clk_set_rate(core, core->new_rate);
 
+	if (core->flags & CLK_OPS_PARENT_ENABLE)
+		clk_core_prepare_enable(parent);
+
 	if (!skip_set_rate && core->ops->set_rate)
 		core->ops->set_rate(core->hw, core->new_rate, best_parent_rate);
 
@@ -1518,6 +1533,9 @@ static void clk_change_rate(struct clk_core *core)
 		clk_core_unprepare(core);
 	}
 
+	if (core->flags & CLK_OPS_PARENT_ENABLE)
+		clk_core_disable_unprepare(parent);
+
 	if (core->notifier_count && old_rate != core->rate)
 		__clk_notify(core, POST_RATE_CHANGE, old_rate, core->rate);
 
-- 
1.9.1