linux-kernel - [PATCH v4 1/7] mfd: ac100: Add device tree bindings for X-Powers AC100 codec/RTC combo IC

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1467302331-9663-2-git-send-email-wens@csie.org>
Date:	Thu, 30 Jun 2016 23:58:45 +0800
From:	Chen-Yu Tsai <wens@...e.org>
To:	Lee Jones <lee.jones@...aro.org>,
	Alessandro Zummo <a.zummo@...ertech.it>,
	Alexandre Belloni <alexandre.belloni@...e-electrons.com>,
	Rob Herring <robh+dt@...nel.org>,
	Mark Rutland <mark.rutland@....com>,
	Maxime Ripard <maxime.ripard@...e-electrons.com>,
	Michael Turquette <mturquette@...libre.com>,
	Stephen Boyd <sboyd@...eaurora.org>
Cc:	Chen-Yu Tsai <wens@...e.org>, linux-arm-kernel@...ts.infradead.org,
	rtc-linux@...glegroups.com, linux-clk@...r.kernel.org,
	devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH v4 1/7] mfd: ac100: Add device tree bindings for X-Powers AC100 codec/RTC combo IC

Signed-off-by: Chen-Yu Tsai <wens@...e.org>
---
Changes since v3:

  - Fixed device node names and added labels.
  - Added clock output from codec and input to rtc.

Changes since v2:

  - Fix interrupt line for ac100_codec in provided example.

---
 Documentation/devicetree/bindings/mfd/ac100.txt | 49 +++++++++++++++++++++++++
 1 file changed, 49 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/ac100.txt

diff --git a/Documentation/devicetree/bindings/mfd/ac100.txt b/Documentation/devicetree/bindings/mfd/ac100.txt
new file mode 100644
index 000000000000..31e6f9cc41bc
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/ac100.txt
@@ -0,0 +1,49 @@
+X-Powers AC100 Codec/RTC IC device tree bindings
+
+AC100 is a audio codec and RTC subsystem combo IC. The 2 parts are
+separated, including power supplies and interrupt lines, but share
+a common register address space and host interface.
+
+Required properties:
+- compatible: "x-powers,ac100"
+- reg: The I2C slave address or RSB hardware address for the chip
+- sub-nodes:
+  - codec
+    - compatible: "x-powers,ac100-codec"
+    - interrupt-parent: The parent interrupt controller
+    - interrupts: SoC NMI / GPIO interrupt connected to the IRQ_AUDIO pin
+    - #clock-cells: shall be 0
+    - clock-output-names: "4M_adda"
+    - see clock/clock-bindings.txt for common clock bindings
+  - rtc
+    - compatible: "x-powers,ac100-rtc"
+    - interrupt-parent: The parent interrupt controller
+    - interrupts: SoC NMI / GPIO interrupt connected to the IRQ_RTC pin
+    - clocks: A phandle to the codec's "4M_adda" clock
+    - #clock-cells: shall be 1
+    - clock-output-names: "cko1_rtc", "cko2_rtc", "cko3_rtc"
+    - see clock/clock-bindings.txt for common clock bindings
+
+Example:
+
+ac100: codec@e89 {
+	compatible = "x-powers,ac100";
+	reg = <0xe89>;
+
+	ac100_codec: codec {
+		compatible = "x-powers,ac100-codec";
+		interrupt-parent = <&r_pio>;
+		interrupts = <0 9 IRQ_TYPE_LEVEL_LOW>; /* PL9 */
+		#clock-cells = <0>;
+		clock-output-names = "4M_adda";
+	};
+
+	ac100_rtc: rtc {
+		compatible = "x-powers,ac100-rtc";
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&ac100_codec>;
+		#clock-cells = <1>;
+		clock-output-names = "cko1_rtc", "cko2_rtc", "cko3_rtc";
+	};
+};
-- 
2.8.1