[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1467316764-19686-2-git-send-email-rob.rice@broadcom.com>
Date: Thu, 30 Jun 2016 15:59:22 -0400
From: Rob Rice <rob.rice@...adcom.com>
To: Jassi Brar <jassisinghbrar@...il.com>,
Rob Herring <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>
Cc: devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
bcm-kernel-feedback-list@...adcom.com,
linux-kernel@...r.kernel.org, Ray Jui <rjui@...adcom.com>,
Scott Branden <sbranden@...adcom.com>,
Jon Mason <jonmason@...adcom.com>,
Florian Fainelli <f.fainelli@...il.com>,
Anup Patel <anup.patel@...adcom.com>,
Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will.deacon@....com>, rob.rice@...adcom.com,
Rob Rice <rrice@...adcom.com>
Subject: [PATCH v2 1/3] dt-bindings: add bindings documentation for PDC driver.
From: Rob Rice <rrice@...adcom.com>
Add the device tree binding documentation for the PDC hardware
in Broadcom iProc SoCs.
Signed-off-by: Rob Rice <rob.rice@...adcom.com>
Acked-by: Rob Herring <robh@...nel.org>
Reviewed-by: Ray Jui <ray.jui@...adcom.com>
Reviewed-by: Anup Patel <anup.patel@...adcom.com>
Reviewed-by: Scott Branden <scott.branden@...adcom.com>
---
.../bindings/mailbox/brcm,iproc-pdc-mbox.txt | 23 ++++++++++++++++++++++
1 file changed, 23 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mailbox/brcm,iproc-pdc-mbox.txt
diff --git a/Documentation/devicetree/bindings/mailbox/brcm,iproc-pdc-mbox.txt b/Documentation/devicetree/bindings/mailbox/brcm,iproc-pdc-mbox.txt
new file mode 100644
index 0000000..411ccf4
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/brcm,iproc-pdc-mbox.txt
@@ -0,0 +1,23 @@
+The PDC driver manages data transfer to and from various offload engines
+on some Broadcom SoCs. An SoC may have multiple PDC hardware blocks. There is
+one device tree entry per block.
+
+Required properties:
+- compatible : Should be "brcm,iproc-pdc-mbox".
+- reg: Should contain PDC registers location and length.
+- interrupts: Should contain the IRQ line for the PDC.
+- #mbox-cells: 1
+- brcm,rx-status-len: Length of metadata preceding received frames, in bytes.
+
+Optional properties:
+- brcm,use-bcm-hdr: present if a BCM header precedes each frame.
+
+Example:
+ pdc0: iproc-pdc0@...12c0000 {
+ compatible = "brcm,iproc-pdc-mbox";
+ reg = <0 0x612c0000 0 0x445>; /* PDC FS0 regs */
+ interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <1>; /* one cell per mailbox channel */
+ brcm,rx-status-len = <32>;
+ brcm,use-bcm-hdr;
+ };
--
2.1.0
Powered by blists - more mailing lists