| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1467354012-7364-2-git-send-email-appanad@xilinx.com>
Date: Fri, 1 Jul 2016 11:50:11 +0530
From: Kedareswara rao Appana <appana.durga.rao@...inx.com>
To: <appanad@...inx.com>, <michal.simek@...inx.com>,
<nicolas.ferre@...el.com>, <punnaia@...inx.com>,
<anirudh@...inx.com>, <harinik@...inx.com>
CC: <netdev@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: [RFC PATCH 1/2] net: ethernet: xilinx: Add gmii2rgmii converter support
This patch adds support for gmii2rgmii converter.
The GMII to RGMII IP core provides the Reduced Gigabit Media
Independent Interface (RGMII) between Ethernet physical media
Devices and the Gigabit Ethernet controller. This core can
switch dynamically between the three different speed modes of
Operation.
MDIO interface is used to set operating speed of Ethernet MAC
Signed-off-by: Kedareswara rao Appana <appanad@...inx.com>
---
drivers/net/ethernet/xilinx/Kconfig | 7 ++
drivers/net/ethernet/xilinx/Makefile | 1 +
drivers/net/ethernet/xilinx/xilinx_gmii2rgmii.c | 76 +++++++++++++++++++++++
include/linux/xilinx_gmii2rgmii.h | 24 +++++++
4 files changed, 108 insertions(+), 0 deletions(-)
create mode 100644 drivers/net/ethernet/xilinx/xilinx_gmii2rgmii.c
create mode 100644 include/linux/xilinx_gmii2rgmii.h
diff --git a/drivers/net/ethernet/xilinx/Kconfig b/drivers/net/ethernet/xilinx/Kconfig
index 4f5c024..d7df70a 100644
--- a/drivers/net/ethernet/xilinx/Kconfig
+++ b/drivers/net/ethernet/xilinx/Kconfig
@@ -39,4 +39,11 @@ config XILINX_LL_TEMAC
This driver supports the Xilinx 10/100/1000 LocalLink TEMAC
core used in Xilinx Spartan and Virtex FPGAs
+config XILINX_GMII2RGMII
+ tristate "Xilinx GMII2RGMII converter driver"
+ ---help---
+ This driver support xilinx GMII to RGMII IP core it provides
+ the Reduced Gigabit Media Independent Interface(RGMII) between
+ Ethernet physical media devices and the Gigabit Ethernet controller.
+
endif # NET_VENDOR_XILINX
diff --git a/drivers/net/ethernet/xilinx/Makefile b/drivers/net/ethernet/xilinx/Makefile
index 214205e..bca0da0 100644
--- a/drivers/net/ethernet/xilinx/Makefile
+++ b/drivers/net/ethernet/xilinx/Makefile
@@ -7,3 +7,4 @@ obj-$(CONFIG_XILINX_LL_TEMAC) += ll_temac.o
obj-$(CONFIG_XILINX_EMACLITE) += xilinx_emaclite.o
xilinx_emac-objs := xilinx_axienet_main.o xilinx_axienet_mdio.o
obj-$(CONFIG_XILINX_AXI_EMAC) += xilinx_emac.o
+obj-$(CONFIG_XILINX_GMII2RGMII) += xilinx_gmii2rgmii.o
diff --git a/drivers/net/ethernet/xilinx/xilinx_gmii2rgmii.c b/drivers/net/ethernet/xilinx/xilinx_gmii2rgmii.c
new file mode 100644
index 0000000..ca9f1ad
--- /dev/null
+++ b/drivers/net/ethernet/xilinx/xilinx_gmii2rgmii.c
@@ -0,0 +1,76 @@
+/* Xilinx GMII2RGMII Converter driver
+ *
+ * Copyright (C) 2016 Xilinx, Inc.
+ *
+ * Author: Kedareswara rao Appana <appanad@...inx.com>
+ *
+ * Description:
+ * This driver is developed for Xilinx GMII2RGMII Converter
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/netdevice.h>
+#include <linux/mii.h>
+#include <linux/of_platform.h>
+#include <linux/of_address.h>
+#include <linux/of_mdio.h>
+#include <linux/xilinx_gmii2rgmii.h>
+
+static void xgmii2rgmii_fix_mac_speed(void *priv, unsigned int speed)
+{
+ struct gmii2rgmii *xphy = (struct xphy *)priv;
+ struct phy_device *gmii2rgmii_phydev = xphy->gmii2rgmii_phy_dev;
+ u16 gmii2rgmii_reg = 0;
+
+ switch (speed) {
+ case 1000:
+ gmii2rgmii_reg |= XILINX_GMII2RGMII_SPEED1000;
+ break;
+ case 100:
+ gmii2rgmii_reg |= XILINX_GMII2RGMII_SPEED100;
+ break;
+ default:
+ return;
+ }
+
+ xphy->mdio_write(xphy->mii_bus, gmii2rgmii_phydev->mdio.addr,
+ XILINX_GMII2RGMII_REG_NUM,
+ gmii2rgmii_reg);
+}
+
+int gmii2rgmii_phyprobe(struct gmii2rgmii *xphy)
+{
+ struct device_node *phy_node;
+ struct phy_device *phydev;
+ struct device_node *np = (struct device_node *)xphy->platform_data;
+
+ phy_node = of_parse_phandle(np, "gmii2rgmii-phy-handle", 0);
+ if (phy_node) {
+ phydev = of_phy_attach(xphy->dev, phy_node, 0, 0);
+ if (!phydev) {
+ netdev_err(xphy->dev,
+ "%s: no gmii to rgmii converter found\n",
+ xphy->dev->name);
+ return -1;
+ }
+ xphy->gmii2rgmii_phy_dev = phydev;
+ }
+ xphy->fix_mac_speed = xgmii2rgmii_fix_mac_speed;
+
+ return 0;
+}
+EXPORT_SYMBOL(gmii2rgmii_phyprobe);
+
+MODULE_DESCRIPTION("Xilinx GMII2RGMII converter driver");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/xilinx_gmii2rgmii.h b/include/linux/xilinx_gmii2rgmii.h
new file mode 100644
index 0000000..64e1659
--- /dev/null
+++ b/include/linux/xilinx_gmii2rgmii.h
@@ -0,0 +1,24 @@
+#ifndef _GMII2RGMII_H
+#define _GMII2RGMII_H
+
+#include <linux/of.h>
+#include <linux/phy.h>
+#include <linux/mii.h>
+
+#define XILINX_GMII2RGMII_FULLDPLX BMCR_FULLDPLX
+#define XILINX_GMII2RGMII_SPEED1000 BMCR_SPEED1000
+#define XILINX_GMII2RGMII_SPEED100 BMCR_SPEED100
+#define XILINX_GMII2RGMII_REG_NUM 0x10
+
+struct gmii2rgmii {
+ struct net_device *dev;
+ struct mii_bus *mii_bus;
+ struct phy_device *gmii2rgmii_phy_dev;
+ void *platform_data;
+ void (*mdio_write)(struct mii_bus *bus, int mii_id, int reg,
+ int val);
+ void (*fix_mac_speed)(void *priv, unsigned int speed);
+};
+
+extern int gmii2rgmii_phyprobe(struct gmii2rgmii *xphy);
+#endif
--
1.7.1
Powered by blists - more mailing lists