[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20160701021629.GA11570@rob-hp-laptop>
Date: Thu, 30 Jun 2016 21:16:29 -0500
From: Rob Herring <robh@...nel.org>
To: Yoshinori Sato <ysato@...rs.sourceforge.jp>
Cc: Lee Jones <lee.jones@...aro.org>, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH RESEND v2] mfd: sm501: Add device property
On Thu, Jun 30, 2016 at 01:56:59AM +0900, Yoshinori Sato wrote:
> Signed-off-by: Yoshinori Sato <ysato@...rs.sourceforge.jp>
> ---
> Documentation/devicetree/bindings/mfd/sm501.txt | 45 +++++++++++++++++++++++++
> drivers/mfd/sm501.c | 9 +++++
> 2 files changed, 54 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mfd/sm501.txt
>
> diff --git a/Documentation/devicetree/bindings/mfd/sm501.txt b/Documentation/devicetree/bindings/mfd/sm501.txt
> new file mode 100644
> index 0000000..9290094
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/sm501.txt
> @@ -0,0 +1,45 @@
> +* SM SM501
> +
> +The SM SM501 is a LCD controller, with proper hardware, it can also
> +drive DVI monitors.
There is already a binding doc in bindings/display/
> +
> +Required properties:
> +- compatible : should be "smi,sm501".
> +- reg : contain two entries:
> + - First entry: System Configuration register
> + - Second entry: IO space (Display Controller register)
> +- interrupts : SMI interrupt to the cpu should be described here.
> +- interrupt-parent : the phandle for the interrupt controller that
> + services interrupts for this device.
> +
> +Optional properties:
> +- mode : select a video mode:
> + <xres>x<yres>[-<bpp>][@<refresh>]
> +- edid : verbatim EDID data block describing attached display.
> + Data from the detailed timing descriptor will be used to
> + program the display controller.
> +- little-endian: available on big endian systems, to
> + set different foreign endian.
> +- big-endian: available on little endian systems, to
> + set different foreign endian.
> +- smi,devices: function block enable bitmap.
> + bit0: USB host
> + bit1: USB slave
> + bit2: SSP Ch0
> + bit3: SSP Ch1
> + bit4: UART Ch0
> + bit5: UART Ch1
> + bit6: Accelerator
> + bit7: AC97
> + bit8: I2S
> + bit9: GPIO
> +
> +Example for MPC5200:
> + display@1,0 {
> + compatible = "smi,sm501";
> + reg = <1 0x00000000 0x00800000
> + 1 0x03e00000 0x00200000>;
> + interrupts = <1 1 3>;
> + mode = "640x480-32@60";
> + edid = [edid-data];
> + };
> diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c
> index 65cd0d2..e2e3f9b 100644
> --- a/drivers/mfd/sm501.c
> +++ b/drivers/mfd/sm501.c
> @@ -21,6 +21,7 @@
> #include <linux/pci.h>
> #include <linux/i2c-gpio.h>
> #include <linux/slab.h>
> +#include <linux/of.h>
>
> #include <linux/sm501.h>
> #include <linux/sm501-regs.h>
> @@ -1377,6 +1378,8 @@ static int sm501_plat_probe(struct platform_device *dev)
> {
> struct sm501_devdata *sm;
> int ret;
> + struct sm501_platdata private_platdata;
> + struct sm501_initdata private_initdata;
>
> sm = kzalloc(sizeof(struct sm501_devdata), GFP_KERNEL);
> if (sm == NULL) {
> @@ -1388,6 +1391,12 @@ static int sm501_plat_probe(struct platform_device *dev)
> sm->dev = &dev->dev;
> sm->pdev_id = dev->id;
> sm->platdata = dev_get_platdata(&dev->dev);
> + if (!sm->platdata) {
> + of_property_read_u32(dev->dev.of_node, "smi,devices",
> + (u32 *)&private_initdata.devices);
> + private_platdata.init = &private_initdata;
> + sm->platdata = &private_platdata;
> + }
>
> ret = platform_get_irq(dev, 0);
> if (ret < 0) {
> --
> 2.7.0
>
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists