| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CALzav=eP90VZQ-cXSkYcKeG5tMZFvQFBueCPg3hr4w_DW08EqQ@mail.gmail.com>
Date: Fri, 1 Jul 2016 11:09:49 -0700
From: David Matlack <dmatlack@...gle.com>
To: Radim Krčmář <rkrcmar@...hat.com>
Cc: "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
kvm list <kvm@...r.kernel.org>,
Paolo Bonzini <pbonzini@...hat.com>,
"Lan, Tianyu" <tianyu.lan@...el.com>,
Igor Mammedov <imammedo@...hat.com>,
Jan Kiszka <jan.kiszka@....de>, Peter Xu <peterx@...hat.com>
Subject: Re: [PATCH v1 10/11] KVM: x86: add KVM_CAP_X2APIC_API
On Thu, Jun 30, 2016 at 1:54 PM, Radim Krčmář <rkrcmar@...hat.com> wrote:
> KVM_CAP_X2APIC_API can be enabled to extend APIC ID in get/set ioctl and MSI
> addresses to 32 bits. Both are needed to support x2APIC.
>
> The capability has to be toggleable and disabled by default, because get/set
> ioctl shifted and truncated APIC ID to 8 bits by using a non-standard protocol
> inspired by xAPIC and the change is not backward-compatible.
>
> Changes to MSI addresses follow the format used by interrupt remapping unit.
> The upper address word, that used to be 0, contains upper 24 bits of the LAPIC
> address in its upper 24 bits. Lower 8 bits are reserved as 0.
> Using the upper address word is not backward-compatible either as we didn't
> check that userspace zeroed the word. Reserved bits are still not explicitly
> checked, but non-zero data will affect LAPIC addresses, which will cause a bug.
>
> Signed-off-by: Radim Krčmář <rkrcmar@...hat.com>
> ---
> v1:
> * rewritten with a toggleable capability [Paolo]
> * dropped MSI_ADDR_EXT_DEST_ID to enforce reserved bits
>
> Documentation/virtual/kvm/api.txt | 26 ++++++++++++++++++++++++++
> arch/x86/include/asm/kvm_host.h | 4 +++-
> arch/x86/kvm/irq_comm.c | 14 ++++++++++----
> arch/x86/kvm/lapic.c | 2 +-
> arch/x86/kvm/vmx.c | 2 +-
> arch/x86/kvm/x86.c | 12 ++++++++++++
> include/uapi/linux/kvm.h | 1 +
> 7 files changed, 54 insertions(+), 7 deletions(-)
>
> diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt
> index 09efa9eb3926..0f978089a0f6 100644
> --- a/Documentation/virtual/kvm/api.txt
> +++ b/Documentation/virtual/kvm/api.txt
> @@ -1482,6 +1482,9 @@ struct kvm_irq_routing_msi {
> __u32 pad;
> };
>
> +If KVM_CAP_X2APIC_API is enabled, then address_hi bits 31-8 contain bits 31-8
> +of destination id and address_hi bits 7-0 is must be 0.
> +
> struct kvm_irq_routing_s390_adapter {
> __u64 ind_addr;
> __u64 summary_addr;
> @@ -1583,6 +1586,13 @@ struct kvm_lapic_state {
> Reads the Local APIC registers and copies them into the input argument. The
> data format and layout are the same as documented in the architecture manual.
>
> +If KVM_CAP_X2APIC_API is enabled, then the format of APIC_ID register depends
> +on APIC mode (reported by MSR_IA32_APICBASE) of its VCPU. The format follows
> +xAPIC otherwise.
> +
> +x2APIC stores APIC ID as little endian in bits 31-0 of APIC_ID register.
> +xAPIC stores bits 7-0 of APIC ID in register bits 31-24.
> +
>
> 4.58 KVM_SET_LAPIC
>
> @@ -1600,6 +1610,8 @@ struct kvm_lapic_state {
> Copies the input argument into the Local APIC registers. The data format
> and layout are the same as documented in the architecture manual.
>
> +See the note about APIC_ID register in KVM_GET_LAPIC.
> +
>
> 4.59 KVM_IOEVENTFD
>
> @@ -2180,6 +2192,9 @@ struct kvm_msi {
>
> No flags are defined so far. The corresponding field must be 0.
>
> +If KVM_CAP_X2APIC_API is enabled, then address_hi bits 31-8 contain bits 31-8
> +of destination id and address_hi bits 7-0 is must be 0.
> +
>
> 4.71 KVM_CREATE_PIT2
>
> @@ -3811,6 +3826,17 @@ Allows use of runtime-instrumentation introduced with zEC12 processor.
> Will return -EINVAL if the machine does not support runtime-instrumentation.
> Will return -EBUSY if a VCPU has already been created.
>
> +7.7 KVM_CAP_X2APIC_API
> +
> +Architectures: x86
> +Parameters: none
> +Returns: 0 on success, -EINVAL if reserved parameters are not 0
> +
> +Enabling this capability changes the behavior of KVM_SET_GSI_ROUTING,
> +KVM_SIGNAL_MSI, KVM_SET_LAPIC, and KVM_GET_LAPIC. See KVM_CAP_X2APIC_API
> +in their respective sections.
> +
> +
> 8. Other capabilities.
> ----------------------
>
> diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
> index 459a789cb3da..48b0ca18066c 100644
> --- a/arch/x86/include/asm/kvm_host.h
> +++ b/arch/x86/include/asm/kvm_host.h
> @@ -782,6 +782,8 @@ struct kvm_arch {
> u32 ldr_mode;
> struct page *avic_logical_id_table_page;
> struct page *avic_physical_id_table_page;
> +
> + bool x2apic_api;
> };
>
> struct kvm_vm_stat {
> @@ -1365,7 +1367,7 @@ bool kvm_intr_is_single_vcpu(struct kvm *kvm, struct kvm_lapic_irq *irq,
> struct kvm_vcpu **dest_vcpu);
>
> void kvm_set_msi_irq(struct kvm_kernel_irq_routing_entry *e,
> - struct kvm_lapic_irq *irq);
> + struct kvm_lapic_irq *irq, bool x2apic_api);
>
> static inline void kvm_arch_vcpu_blocking(struct kvm_vcpu *vcpu)
> {
> diff --git a/arch/x86/kvm/irq_comm.c b/arch/x86/kvm/irq_comm.c
> index 47ad681a33fd..4594644ab090 100644
> --- a/arch/x86/kvm/irq_comm.c
> +++ b/arch/x86/kvm/irq_comm.c
> @@ -111,12 +111,17 @@ int kvm_irq_delivery_to_apic(struct kvm *kvm, struct kvm_lapic *src,
> }
>
> void kvm_set_msi_irq(struct kvm_kernel_irq_routing_entry *e,
> - struct kvm_lapic_irq *irq)
> + struct kvm_lapic_irq *irq, bool x2apic_api)
> {
> trace_kvm_msi_set_irq(e->msi.address_lo, e->msi.data);
This tracepoint should start reporting e->msi.address_hi as well now.
>
> irq->dest_id = (e->msi.address_lo &
> MSI_ADDR_DEST_ID_MASK) >> MSI_ADDR_DEST_ID_SHIFT;
> + if (x2apic_api)
> + /* MSI_ADDR_EXT_DEST_ID() is omitted to introduce bugs on
> + * userspaces that set reserved bits 0-7.
> + */
> + irq->dest_id |= e->msi.address_hi;
> irq->vector = (e->msi.data &
> MSI_DATA_VECTOR_MASK) >> MSI_DATA_VECTOR_SHIFT;
> irq->dest_mode = (1 << MSI_ADDR_DEST_MODE_SHIFT) & e->msi.address_lo;
> @@ -137,7 +142,7 @@ int kvm_set_msi(struct kvm_kernel_irq_routing_entry *e,
> if (!level)
> return -1;
>
> - kvm_set_msi_irq(e, &irq);
> + kvm_set_msi_irq(e, &irq, kvm->arch.x2apic_api);
>
> return kvm_irq_delivery_to_apic(kvm, NULL, &irq, NULL);
> }
> @@ -153,7 +158,7 @@ int kvm_arch_set_irq_inatomic(struct kvm_kernel_irq_routing_entry *e,
> if (unlikely(e->type != KVM_IRQ_ROUTING_MSI))
> return -EWOULDBLOCK;
>
> - kvm_set_msi_irq(e, &irq);
> + kvm_set_msi_irq(e, &irq, kvm->arch.x2apic_api);
>
> if (kvm_irq_delivery_to_apic_fast(kvm, NULL, &irq, &r, NULL))
> return r;
> @@ -393,7 +398,8 @@ void kvm_scan_ioapic_routes(struct kvm_vcpu *vcpu,
> if (entry->type != KVM_IRQ_ROUTING_MSI)
> continue;
>
> - kvm_set_msi_irq(entry, &irq);
> + kvm_set_msi_irq(entry, &irq,
> + vcpu->kvm->arch.x2apic_api);
>
> if (irq.level && kvm_apic_match_dest(vcpu, NULL, 0,
> irq.dest_id, irq.dest_mode))
> diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
> index 46eb71c425cf..178605635df5 100644
> --- a/arch/x86/kvm/lapic.c
> +++ b/arch/x86/kvm/lapic.c
> @@ -1983,7 +1983,7 @@ int kvm_get_apic_interrupt(struct kvm_vcpu *vcpu)
> static void __kvm_apic_state_fixup(struct kvm_vcpu *vcpu,
> struct kvm_lapic_state *s, bool set)
> {
> - if (apic_x2apic_mode(vcpu->arch.apic)) {
> + if (apic_x2apic_mode(vcpu->arch.apic) && !vcpu->kvm->arch.x2apic_api) {
> u32 *id = (u32 *)(s->regs + APIC_ID);
> if (set)
> *id >>= 24;
> diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
> index a10038258b80..ea1f439b444e 100644
> --- a/arch/x86/kvm/vmx.c
> +++ b/arch/x86/kvm/vmx.c
> @@ -11075,7 +11075,7 @@ static int vmx_update_pi_irte(struct kvm *kvm, unsigned int host_irq,
> * We will support full lowest-priority interrupt later.
> */
>
> - kvm_set_msi_irq(e, &irq);
> + kvm_set_msi_irq(e, &irq, kvm->arch.x2apic_api);
> if (!kvm_intr_is_single_vcpu(kvm, &irq, &vcpu)) {
> /*
> * Make sure the IRTE is in remapped mode if
> diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
> index 043f110f2210..16b55f09dd16 100644
> --- a/arch/x86/kvm/x86.c
> +++ b/arch/x86/kvm/x86.c
> @@ -2576,6 +2576,7 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
> case KVM_CAP_DISABLE_QUIRKS:
> case KVM_CAP_SET_BOOT_CPU_ID:
> case KVM_CAP_SPLIT_IRQCHIP:
> + case KVM_CAP_X2APIC_API:
> #ifdef CONFIG_KVM_DEVICE_ASSIGNMENT
> case KVM_CAP_ASSIGN_DEV_IRQ:
> case KVM_CAP_PCI_2_3:
> @@ -3799,6 +3800,17 @@ split_irqchip_unlock:
> mutex_unlock(&kvm->lock);
> break;
> }
> + case KVM_CAP_X2APIC_API: {
> + struct kvm_enable_cap valid = {.cap = KVM_CAP_X2APIC_API};
> +
> + r = -EINVAL;
> + if (memcmp(cap, &valid, sizeof(valid)))
> + break;
> +
> + kvm->arch.x2apic_api = true;
> + r = 0;
> + break;
> + }
> default:
> r = -EINVAL;
> break;
> diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h
> index 05ebf475104c..43b355d6db7b 100644
> --- a/include/uapi/linux/kvm.h
> +++ b/include/uapi/linux/kvm.h
> @@ -866,6 +866,7 @@ struct kvm_ppc_smmu_info {
> #define KVM_CAP_ARM_PMU_V3 126
> #define KVM_CAP_VCPU_ATTRIBUTES 127
> #define KVM_CAP_MAX_VCPU_ID 128
> +#define KVM_CAP_X2APIC_API 129
>
> #ifdef KVM_CAP_IRQ_ROUTING
>
> --
> 2.9.0
>
> --
> To unsubscribe from this list: send the line "unsubscribe kvm" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists