[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20160701023825.GA27978@rob-hp-laptop>
Date: Thu, 30 Jun 2016 21:38:25 -0500
From: Rob Herring <robh@...nel.org>
To: William Wu <william.wu@...k-chips.com>
Cc: gregkh@...uxfoundation.org, balbi@...nel.org, heiko@...ech.de,
linux-rockchip@...ts.infradead.org, briannorris@...gle.com,
dianders@...gle.com, kever.yang@...k-chips.com,
huangtao@...k-chips.com, frank.wang@...k-chips.com,
eddie.cai@...k-chips.com, John.Youn@...opsys.com,
linux-kernel@...r.kernel.org, linux-usb@...r.kernel.org,
sergei.shtylyov@...entembedded.com, mark.rutland@....com,
devicetree@...r.kernel.org
Subject: Re: [PATCH v5 4/5] usb: dwc3: add dis_del_phy_power_chg_quirk
On Thu, Jun 30, 2016 at 07:12:55PM +0800, William Wu wrote:
> Add a quirk to clear the GUSB3PIPECTL.DELAYP1TRANS bit,
> which specifies whether disable delay PHY power change
> from P0 to P1/P2/P3 when link state changing from U0
> to U1/U2/U3 respectively.
>
> Signed-off-by: William Wu <william.wu@...k-chips.com>
> ---
> Changes in v5:
> - None
>
> Changes in v4:
> - rebase on top of balbi testing/next, remove pdata (balbi)
>
> Changes in v3:
> - None
>
> Changes in v2:
> - None
>
> Documentation/devicetree/bindings/usb/dwc3.txt | 2 ++
> drivers/usb/dwc3/core.c | 5 +++++
> drivers/usb/dwc3/core.h | 3 +++
> 3 files changed, 10 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt
> index 34d13a5..bd5bef0 100644
> --- a/Documentation/devicetree/bindings/usb/dwc3.txt
> +++ b/Documentation/devicetree/bindings/usb/dwc3.txt
> @@ -42,6 +42,8 @@ Optional properties:
> - snps,dis_u2_freeclk_exists_quirk: when set, clear the u2_freeclk_exists
> in GUSB2PHYCFG, specify that USB2 PHY doesn't provide
> a free-running PHY clock.
> + - snps,dis_del_phy_power_chg_quirk: when set core will change PHY power
> + from P0 to P1/P2/P3 without delay.
Use '-', not '_'.
> - snps,phyif_utmi_quirk: when set core will set phyif UTMI+ interface.
> - snps,phyif_utmi: the value to configure the core to support a UTMI+ PHY
> with an 8- or 16-bit interface. Value 0 select 8-bit
Powered by blists - more mailing lists