[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1467640052-6770-3-git-send-email-gabriel.fernandez@st.com>
Date: Mon, 4 Jul 2016 15:47:31 +0200
From: <gabriel.fernandez@...com>
To: Philipp Zabel <p.zabel@...gutronix.de>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Russell King <linux@...linux.org.uk>, <patrice.chotard@...com>,
<alexandre.torgue@...com>
CC: <devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>,
Gabriel Fernandez <gabriel.fernandez@...com>
Subject: [PATCH 3/4] drivers: reset: Add STM32 reset driver
From: Gabriel Fernandez <gabriel.fernandez@...com>
The STM32 MCUs family IPs can be reset by accessing some registers
from the RCC block.
The list of available reset lines is documented in the DT bindings.
Signed-off-by: Maxime Coquelin <mcoquelin.stm32@...il.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@...com>
---
drivers/reset/Makefile | 1 +
drivers/reset/reset-stm32.c | 113 ++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 114 insertions(+)
create mode 100644 drivers/reset/reset-stm32.c
diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index 03dc1bb..3776b7b 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -4,6 +4,7 @@ obj-$(CONFIG_ARCH_SOCFPGA) += reset-socfpga.o
obj-$(CONFIG_ARCH_BERLIN) += reset-berlin.o
obj-$(CONFIG_MACH_PISTACHIO) += reset-pistachio.o
obj-$(CONFIG_ARCH_MESON) += reset-meson.o
+obj-$(CONFIG_ARCH_STM32) += reset-stm32.o
obj-$(CONFIG_ARCH_SUNXI) += reset-sunxi.o
obj-$(CONFIG_ARCH_STI) += sti/
obj-$(CONFIG_ARCH_HISI) += hisilicon/
diff --git a/drivers/reset/reset-stm32.c b/drivers/reset/reset-stm32.c
new file mode 100644
index 0000000..be42bff
--- /dev/null
+++ b/drivers/reset/reset-stm32.c
@@ -0,0 +1,113 @@
+/*
+ * Copyright (C) Maxime Coquelin 2015
+ * Author: Maxime Coquelin <mcoquelin.stm32@...il.com>
+ * License terms: GNU General Public License (GPL), version 2
+ *
+ * Heavily based on sunxi driver from Maxime Ripard.
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+
+struct stm32_reset_data {
+ spinlock_t lock;
+ void __iomem *membase;
+ struct reset_controller_dev rcdev;
+};
+
+static int stm32_reset_assert(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct stm32_reset_data *data = container_of(rcdev,
+ struct stm32_reset_data,
+ rcdev);
+ int bank = id / BITS_PER_LONG;
+ int offset = id % BITS_PER_LONG;
+ unsigned long flags;
+ u32 reg;
+
+ spin_lock_irqsave(&data->lock, flags);
+
+ reg = readl_relaxed(data->membase + (bank * 4));
+ writel_relaxed(reg | BIT(offset), data->membase + (bank * 4));
+
+ spin_unlock_irqrestore(&data->lock, flags);
+
+ return 0;
+}
+
+static int stm32_reset_deassert(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct stm32_reset_data *data = container_of(rcdev,
+ struct stm32_reset_data,
+ rcdev);
+ int bank = id / BITS_PER_LONG;
+ int offset = id % BITS_PER_LONG;
+ unsigned long flags;
+ u32 reg;
+
+ spin_lock_irqsave(&data->lock, flags);
+
+ reg = readl_relaxed(data->membase + (bank * 4));
+ writel_relaxed(reg & ~BIT(offset), data->membase + (bank * 4));
+
+ spin_unlock_irqrestore(&data->lock, flags);
+
+ return 0;
+}
+
+static const struct reset_control_ops stm32_reset_ops = {
+ .assert = stm32_reset_assert,
+ .deassert = stm32_reset_deassert,
+};
+
+static const struct of_device_id stm32_reset_dt_ids[] = {
+ { .compatible = "st,stm32-rcc", },
+ { /* sentinel */ },
+};
+
+static int stm32_reset_probe(struct platform_device *pdev)
+{
+ struct stm32_reset_data *data;
+ struct resource *res;
+
+ data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ data->membase = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(data->membase))
+ return PTR_ERR(data->membase);
+
+ spin_lock_init(&data->lock);
+
+ data->rcdev.owner = THIS_MODULE;
+ data->rcdev.nr_resets = resource_size(res) * 8;
+ data->rcdev.ops = &stm32_reset_ops;
+ data->rcdev.of_node = pdev->dev.of_node;
+
+ return devm_reset_controller_register(&pdev->dev, &data->rcdev);
+}
+
+static struct platform_driver stm32_reset_driver = {
+ .probe = stm32_reset_probe,
+ .driver = {
+ .name = "stm32-rcc-reset",
+ .of_match_table = stm32_reset_dt_ids,
+ },
+};
+module_platform_driver(stm32_reset_driver);
+
+MODULE_AUTHOR("Maxime Coquelin <maxime.coquelin@...il.com>");
+MODULE_DESCRIPTION("STM32 MCUs Reset Controller Driver");
+MODULE_LICENSE("GPL");
--
1.9.1
Powered by blists - more mailing lists