| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1467648434-29080-6-git-send-email-dan@emutex.com>
Date: Mon, 4 Jul 2016 17:07:14 +0100
From: Dan O'Donovan <dan@...tex.com>
To: platform-driver-x86@...r.kernel.org, dvhart@...radead.org
Cc: lee.jones@...aro.org, andriy.shevchenko@...ux.intel.com,
mika.westerberg@...ux.intel.com, linux-kernel@...r.kernel.org,
Dan O'Donovan <dan@...tex.com>
Subject: [RESEND RFC PATCH 5/5] platform: x86: add platform driver for UP Board
This platform driver instantiates a platform device relevant to the
UP board, in particular a device representing the unique I/O pin CPLD
controller on the UP board.
In addition, this driver registers pin maps to configure
appropriately the underlying SoC GPIO pins for use with the
UP Board I/O pin header.
Signed-off-by: Dan O'Donovan <dan@...tex.com>
---
drivers/platform/x86/Kconfig | 13 ++++
drivers/platform/x86/Makefile | 5 ++
drivers/platform/x86/up_board.c | 167 ++++++++++++++++++++++++++++++++++++++++
3 files changed, 185 insertions(+)
create mode 100644 drivers/platform/x86/up_board.c
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 3ec0025..b579adb 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -1011,4 +1011,17 @@ config INTEL_TELEMETRY
used to get various SoC events and parameters
directly via debugfs files. Various tools may use
this interface for SoC state monitoring.
+
+config UP_BOARD
+ bool "UP Board Platform I/O Driver"
+ depends on ACPI && PINCTRL_CHERRYVIEW
+ select GPIOLIB_IRQCHIP
+ select LEDS_CLASS
+ select NEW_LEDS
+ ---help---
+ This driver provides support for the platform functions on the UP
+ board. It includes platform, pinctrl and gpio drivers for the CPLD
+ that manages the external pin header, as well as a driver for the
+ built-in LEDs.
+
endif # X86_PLATFORM_DEVICES
diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
index 9b11b40..687c583 100644
--- a/drivers/platform/x86/Makefile
+++ b/drivers/platform/x86/Makefile
@@ -70,3 +70,8 @@ obj-$(CONFIG_INTEL_TELEMETRY) += intel_telemetry_core.o \
intel_telemetry_pltdrv.o \
intel_telemetry_debugfs.o
obj-$(CONFIG_INTEL_PMC_CORE) += intel_pmc_core.o
+obj-$(CONFIG_UP_BOARD) += up_board.o \
+ up_board_cpld.o \
+ up_board_pinctrl.o \
+ up_board_gpio.o \
+ up_board_leds.o
diff --git a/drivers/platform/x86/up_board.c b/drivers/platform/x86/up_board.c
new file mode 100644
index 0000000..8635759
--- /dev/null
+++ b/drivers/platform/x86/up_board.c
@@ -0,0 +1,167 @@
+
+/*
+ * UP Board platform driver.
+ *
+ * Copyright (c) 2016, Emutex Ltd. All rights reserved.
+ *
+ * Author: Dan O'Donovan <dan@...tex.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/module.h>
+#include <linux/dmi.h>
+#include <linux/platform_device.h>
+#include <linux/pinctrl/machine.h>
+#include <linux/pinctrl/pinconf-generic.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
+
+/* Internal context information for this driver */
+struct up_board_info {
+ struct platform_device *cpld_pdev;
+ struct platform_device *vreg_pdev;
+ struct pinctrl_map *pinmux_maps;
+ unsigned int num_pinmux_maps;
+};
+
+/*
+ * On the UP board, if the ODEn bit is set on the pad configuration
+ * it seems to impair some functions on the I/O header such as UART, SPI
+ * and I2C. So we disable it for all header pins by default.
+ */
+static unsigned long oden_disable_conf[] = {
+ PIN_CONF_PACKED(PIN_CONFIG_DRIVE_PUSH_PULL, 0),
+};
+
+#define UP_PIN_MAP_MUX_GROUP(d, p, f) \
+ PIN_MAP_MUX_GROUP_DEFAULT(d, p, f "_grp", f)
+
+#define UP_PIN_MAP_CONF_ODEN(d, p, f) \
+ PIN_MAP_CONFIGS_GROUP_DEFAULT(d, p, f "_grp", oden_disable_conf)
+
+/* Maps pin functions on UP Board I/O pin header to specific CHT SoC devices */
+static struct pinctrl_map up_pinmux_maps[] __initdata = {
+ UP_PIN_MAP_MUX_GROUP("8086228A:00", "up-board-pinctrl", "uart1"),
+ UP_PIN_MAP_MUX_GROUP("808622C1:00", "up-board-pinctrl", "i2c0"),
+ UP_PIN_MAP_MUX_GROUP("808622C1:01", "up-board-pinctrl", "i2c1"),
+ UP_PIN_MAP_MUX_GROUP("80862288:00", "up-board-pinctrl", "pwm0"),
+ UP_PIN_MAP_MUX_GROUP("80862288:01", "up-board-pinctrl", "pwm1"),
+ UP_PIN_MAP_MUX_GROUP("8086228E:01", "up-board-pinctrl", "spi2"),
+ UP_PIN_MAP_MUX_GROUP("808622A8:00", "up-board-pinctrl", "i2s2"),
+ UP_PIN_MAP_MUX_GROUP("i2c-ADC081C:00", "up-board-pinctrl", "adc0"),
+
+ UP_PIN_MAP_MUX_GROUP("8086228A:00", "INT33FF:00", "uart1"),
+ UP_PIN_MAP_MUX_GROUP("808622C1:00", "INT33FF:00", "i2c0"),
+ UP_PIN_MAP_MUX_GROUP("808622C1:01", "INT33FF:00", "i2c1"),
+ UP_PIN_MAP_MUX_GROUP("808622C1:02", "INT33FF:00", "i2c2"),
+ UP_PIN_MAP_MUX_GROUP("80862288:00", "INT33FF:03", "pwm0"),
+ UP_PIN_MAP_MUX_GROUP("80862288:01", "INT33FF:03", "pwm1"),
+ UP_PIN_MAP_MUX_GROUP("8086228E:01", "INT33FF:03", "spi2"),
+ UP_PIN_MAP_MUX_GROUP("808622A8:00", "INT33FF:00", "lpe"),
+
+ UP_PIN_MAP_CONF_ODEN("8086228A:00", "INT33FF:00", "uart1"),
+ UP_PIN_MAP_CONF_ODEN("808622C1:00", "INT33FF:00", "i2c0"),
+ UP_PIN_MAP_CONF_ODEN("808622C1:01", "INT33FF:00", "i2c1"),
+ UP_PIN_MAP_CONF_ODEN("80862288:00", "INT33FF:03", "pwm0"),
+ UP_PIN_MAP_CONF_ODEN("80862288:01", "INT33FF:03", "pwm1"),
+ UP_PIN_MAP_CONF_ODEN("8086228E:01", "INT33FF:03", "spi2"),
+ UP_PIN_MAP_CONF_ODEN("808622A8:00", "INT33FF:00", "lpe"),
+};
+
+static struct up_board_info up_board_info = {
+ .pinmux_maps = up_pinmux_maps,
+ .num_pinmux_maps = ARRAY_SIZE(up_pinmux_maps),
+};
+
+static const struct dmi_system_id up_board_id_table[] __initconst = {
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "AAEON"),
+ DMI_MATCH(DMI_BOARD_NAME, "UP-CHT01"),
+ DMI_MATCH(DMI_BOARD_VERSION, "V0.4"),
+ },
+ .driver_data = &up_board_info,
+ },
+ { }
+};
+
+static struct regulator_consumer_supply vref3v3_consumers[] = {
+ REGULATOR_SUPPLY("vref", "i2c-ADC081C:00"),
+};
+
+static struct up_board_info *up_board;
+
+static int __init
+up_board_init_devices(void)
+{
+ const struct dmi_system_id *system_id;
+ int ret;
+
+ system_id = dmi_first_match(up_board_id_table);
+ if (!system_id)
+ return -ENXIO;
+
+ up_board = system_id->driver_data;
+
+ /* Register pin control mappings specific to board version */
+ if (up_board->pinmux_maps) {
+ ret = pinctrl_register_mappings(up_board->pinmux_maps,
+ up_board->num_pinmux_maps);
+ if (ret) {
+ pr_err("Failed to register UP Board pinctrl mapping");
+ return ret;
+ }
+ }
+
+ /* Create a platform device to manage the UP Board I/O header CPLD */
+ up_board->cpld_pdev =
+ platform_device_register_simple("up-board-cpld",
+ PLATFORM_DEVID_NONE,
+ NULL, 0);
+ if (IS_ERR(up_board->cpld_pdev)) {
+ pr_err("Failed to register UP Board I/O CPLD platform device");
+ return PTR_ERR(up_board->cpld_pdev);
+ }
+
+ up_board->vreg_pdev =
+ regulator_register_always_on(0, "fixed-3.3V",
+ vref3v3_consumers,
+ ARRAY_SIZE(vref3v3_consumers),
+ 3300000);
+ if (!up_board->vreg_pdev) {
+ pr_err("Failed to register UP Board ADC vref regulator");
+ platform_device_unregister(up_board->cpld_pdev);
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static void __exit
+up_board_exit(void)
+{
+ platform_device_unregister(up_board->vreg_pdev);
+ platform_device_unregister(up_board->cpld_pdev);
+}
+
+/*
+ * Using arch_initcall to ensure that pinmux maps are registered
+ * before the relevant devices are initialised
+ */
+arch_initcall(up_board_init_devices);
+module_exit(up_board_exit);
+
+MODULE_AUTHOR("Dan O'Donovan <dan@...tex.com>");
+MODULE_DESCRIPTION("Platform driver for UP Board");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("dmi:*:svnAAEON*:rnUP-CHT01:*");
--
2.1.4
Powered by blists - more mailing lists