| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1467696237-27831-5-git-send-email-kishon@ti.com>
Date: Tue, 5 Jul 2016 10:53:51 +0530
From: Kishon Vijay Abraham I <kishon@...com>
To: <gregkh@...uxfoundation.org>
CC: <kishon@...com>, <linux-kernel@...r.kernel.org>
Subject: [PATCH 04/10] phy: da8xx-usb: new driver for DA8xx SoC USB PHY
From: David Lechner <david@...hnology.com>
This is a new phy driver for the SoC USB controllers on the TI DA8xx
family of microcontrollers. The USB 1.1 PHY is just a simple on/off.
The USB 2.0 PHY also allows overriding the VBUS and ID pins.
Signed-off-by: David Lechner <david@...hnology.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@...com>
---
drivers/phy/Kconfig | 10 ++
drivers/phy/Makefile | 1 +
drivers/phy/phy-da8xx-usb.c | 245 +++++++++++++++++++++++++++++++++++++++++++
3 files changed, 256 insertions(+)
create mode 100644 drivers/phy/phy-da8xx-usb.c
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index b869b98..02afc624 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -44,6 +44,16 @@ config ARMADA375_USBCLUSTER_PHY
depends on OF && HAS_IOMEM
select GENERIC_PHY
+config PHY_DA8XX_USB
+ tristate "TI DA8xx USB PHY Driver"
+ depends on ARCH_DAVINCI_DA8XX
+ select GENERIC_PHY
+ select MFD_SYSCON
+ help
+ Enable this to support the USB PHY on DA8xx SoCs.
+
+ This driver controls both the USB 1.1 PHY and the USB 2.0 PHY.
+
config PHY_DM816X_USB
tristate "TI dm816x USB PHY driver"
depends on ARCH_OMAP2PLUS
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index 9c3e73c..fa8480e 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -6,6 +6,7 @@ obj-$(CONFIG_GENERIC_PHY) += phy-core.o
obj-$(CONFIG_PHY_BCM_NS_USB2) += phy-bcm-ns-usb2.o
obj-$(CONFIG_PHY_BERLIN_USB) += phy-berlin-usb.o
obj-$(CONFIG_PHY_BERLIN_SATA) += phy-berlin-sata.o
+obj-$(CONFIG_PHY_DA8XX_USB) += phy-da8xx-usb.o
obj-$(CONFIG_PHY_DM816X_USB) += phy-dm816x-usb.o
obj-$(CONFIG_ARMADA375_USBCLUSTER_PHY) += phy-armada375-usb2.o
obj-$(CONFIG_BCM_KONA_USB2_PHY) += phy-bcm-kona-usb2.o
diff --git a/drivers/phy/phy-da8xx-usb.c b/drivers/phy/phy-da8xx-usb.c
new file mode 100644
index 0000000..b2e59b6
--- /dev/null
+++ b/drivers/phy/phy-da8xx-usb.c
@@ -0,0 +1,245 @@
+/*
+ * phy-da8xx-usb - TI DaVinci DA8xx USB PHY driver
+ *
+ * Copyright (C) 2016 David Lechner <david@...hnology.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/mfd/da8xx-cfgchip.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+struct da8xx_usb_phy {
+ struct phy_provider *phy_provider;
+ struct phy *usb11_phy;
+ struct phy *usb20_phy;
+ struct clk *usb11_clk;
+ struct clk *usb20_clk;
+ struct regmap *regmap;
+};
+
+static int da8xx_usb11_phy_power_on(struct phy *phy)
+{
+ struct da8xx_usb_phy *d_phy = phy_get_drvdata(phy);
+ int ret;
+
+ ret = clk_prepare_enable(d_phy->usb11_clk);
+ if (ret)
+ return ret;
+
+ regmap_write_bits(d_phy->regmap, CFGCHIP(2), CFGCHIP2_USB1SUSPENDM,
+ CFGCHIP2_USB1SUSPENDM);
+
+ return 0;
+}
+
+static int da8xx_usb11_phy_power_off(struct phy *phy)
+{
+ struct da8xx_usb_phy *d_phy = phy_get_drvdata(phy);
+
+ regmap_write_bits(d_phy->regmap, CFGCHIP(2), CFGCHIP2_USB1SUSPENDM, 0);
+
+ clk_disable_unprepare(d_phy->usb11_clk);
+
+ return 0;
+}
+
+static const struct phy_ops da8xx_usb11_phy_ops = {
+ .power_on = da8xx_usb11_phy_power_on,
+ .power_off = da8xx_usb11_phy_power_off,
+ .owner = THIS_MODULE,
+};
+
+static int da8xx_usb20_phy_power_on(struct phy *phy)
+{
+ struct da8xx_usb_phy *d_phy = phy_get_drvdata(phy);
+ int ret;
+
+ ret = clk_prepare_enable(d_phy->usb20_clk);
+ if (ret)
+ return ret;
+
+ regmap_write_bits(d_phy->regmap, CFGCHIP(2), CFGCHIP2_OTGPWRDN, 0);
+
+ return 0;
+}
+
+static int da8xx_usb20_phy_power_off(struct phy *phy)
+{
+ struct da8xx_usb_phy *d_phy = phy_get_drvdata(phy);
+
+ regmap_write_bits(d_phy->regmap, CFGCHIP(2), CFGCHIP2_OTGPWRDN,
+ CFGCHIP2_OTGPWRDN);
+
+ clk_disable_unprepare(d_phy->usb20_clk);
+
+ return 0;
+}
+
+static int da8xx_usb20_phy_set_mode(struct phy *phy, enum phy_mode mode)
+{
+ struct da8xx_usb_phy *d_phy = phy_get_drvdata(phy);
+ u32 val;
+
+ switch (mode) {
+ case PHY_MODE_USB_HOST: /* Force VBUS valid, ID = 0 */
+ val = CFGCHIP2_OTGMODE_FORCE_HOST;
+ break;
+ case PHY_MODE_USB_DEVICE: /* Force VBUS valid, ID = 1 */
+ val = CFGCHIP2_OTGMODE_FORCE_DEVICE;
+ break;
+ case PHY_MODE_USB_OTG: /* Don't override the VBUS/ID comparators */
+ val = CFGCHIP2_OTGMODE_NO_OVERRIDE;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ regmap_write_bits(d_phy->regmap, CFGCHIP(2), CFGCHIP2_OTGMODE_MASK,
+ val);
+
+ return 0;
+}
+
+static const struct phy_ops da8xx_usb20_phy_ops = {
+ .power_on = da8xx_usb20_phy_power_on,
+ .power_off = da8xx_usb20_phy_power_off,
+ .set_mode = da8xx_usb20_phy_set_mode,
+ .owner = THIS_MODULE,
+};
+
+static struct phy *da8xx_usb_phy_of_xlate(struct device *dev,
+ struct of_phandle_args *args)
+{
+ struct da8xx_usb_phy *d_phy = dev_get_drvdata(dev);
+
+ if (!d_phy)
+ return ERR_PTR(-ENODEV);
+
+ switch (args->args[0]) {
+ case 0:
+ return d_phy->usb20_phy;
+ case 1:
+ return d_phy->usb11_phy;
+ default:
+ return ERR_PTR(-EINVAL);
+ }
+}
+
+static int da8xx_usb_phy_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *node = dev->of_node;
+ struct da8xx_usb_phy *d_phy;
+
+ d_phy = devm_kzalloc(dev, sizeof(*d_phy), GFP_KERNEL);
+ if (!d_phy)
+ return -ENOMEM;
+
+ if (node)
+ d_phy->regmap = syscon_regmap_lookup_by_compatible(
+ "ti,da830-cfgchip");
+ else
+ d_phy->regmap = syscon_regmap_lookup_by_pdevname("syscon.0");
+ if (IS_ERR(d_phy->regmap)) {
+ dev_err(dev, "Failed to get syscon\n");
+ return PTR_ERR(d_phy->regmap);
+ }
+
+ d_phy->usb11_clk = devm_clk_get(dev, "usb11_phy");
+ if (IS_ERR(d_phy->usb11_clk)) {
+ dev_err(dev, "Failed to get usb11_phy clock\n");
+ return PTR_ERR(d_phy->usb11_clk);
+ }
+
+ d_phy->usb20_clk = devm_clk_get(dev, "usb20_phy");
+ if (IS_ERR(d_phy->usb20_clk)) {
+ dev_err(dev, "Failed to get usb20_phy clock\n");
+ return PTR_ERR(d_phy->usb20_clk);
+ }
+
+ d_phy->usb11_phy = devm_phy_create(dev, node, &da8xx_usb11_phy_ops);
+ if (IS_ERR(d_phy->usb11_phy)) {
+ dev_err(dev, "Failed to create usb11 phy\n");
+ return PTR_ERR(d_phy->usb11_phy);
+ }
+
+ d_phy->usb20_phy = devm_phy_create(dev, node, &da8xx_usb20_phy_ops);
+ if (IS_ERR(d_phy->usb20_phy)) {
+ dev_err(dev, "Failed to create usb20 phy\n");
+ return PTR_ERR(d_phy->usb20_phy);
+ }
+
+ platform_set_drvdata(pdev, d_phy);
+ phy_set_drvdata(d_phy->usb11_phy, d_phy);
+ phy_set_drvdata(d_phy->usb20_phy, d_phy);
+
+ if (node) {
+ d_phy->phy_provider = devm_of_phy_provider_register(dev,
+ da8xx_usb_phy_of_xlate);
+ if (IS_ERR(d_phy->phy_provider)) {
+ dev_err(dev, "Failed to create phy provider\n");
+ return PTR_ERR(d_phy->phy_provider);
+ }
+ } else {
+ int ret;
+
+ ret = phy_create_lookup(d_phy->usb11_phy, "usb-phy", "ohci.0");
+ if (ret)
+ dev_warn(dev, "Failed to create usb11 phy lookup\n");
+ ret = phy_create_lookup(d_phy->usb20_phy, "usb-phy",
+ "musb-da8xx");
+ if (ret)
+ dev_warn(dev, "Failed to create usb20 phy lookup\n");
+ }
+
+ return 0;
+}
+
+static int da8xx_usb_phy_remove(struct platform_device *pdev)
+{
+ struct da8xx_usb_phy *d_phy = platform_get_drvdata(pdev);
+
+ if (!pdev->dev.of_node) {
+ phy_remove_lookup(d_phy->usb20_phy, "usb-phy", "musb-da8xx");
+ phy_remove_lookup(d_phy->usb11_phy, "usb-phy", "ohci.0");
+ }
+
+ return 0;
+}
+
+static const struct of_device_id da8xx_usb_phy_ids[] = {
+ { .compatible = "ti,da830-usb-phy" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, da8xx_usb_phy_ids);
+
+static struct platform_driver da8xx_usb_phy_driver = {
+ .probe = da8xx_usb_phy_probe,
+ .remove = da8xx_usb_phy_remove,
+ .driver = {
+ .name = "da8xx-usb-phy",
+ .of_match_table = da8xx_usb_phy_ids,
+ },
+};
+
+module_platform_driver(da8xx_usb_phy_driver);
+
+MODULE_ALIAS("platform:da8xx-usb-phy");
+MODULE_AUTHOR("David Lechner <david@...hnology.com>");
+MODULE_DESCRIPTION("TI DA8xx USB PHY driver");
+MODULE_LICENSE("GPL v2");
--
1.7.9.5
Powered by blists - more mailing lists