| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <3015470.z4L7UQJKa9@phil>
Date: Wed, 06 Jul 2016 18:13:06 +0200
From: Heiko Stuebner <heiko@...ech.de>
To: ayaka <ayaka@...lik.info>
Cc: devicetree@...r.kernel.org, linux-rockchip@...ts.infradead.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux@...linux.org.uk, mark.rutland@....com, robh+dt@...nel.org
Subject: Re: [PATCH 2/3] ARM: dts: move regulator settings from common to specifics
Hi,
Am Mittwoch, 6. Juli 2016, 23:25:23 schrieb ayaka:
> The regulator settings are the same in the firefly beta and
> firefly. But the firefly reload is different. I remove
> the difference part from the common header dtsi, but remained those
> common one to keep references.
>
> Signed-off-by: ayaka <ayaka@...lik.info>
applies to all 3 patches: we require real names both in the patch/mail from
as well as the Signed-off-by line, see [0] at number 11. To my untrained eye
the name given doesn't look like a real name, please correct me if I'm
wrong.
[0] https://www.kernel.org/doc/Documentation/SubmittingPatches
> ---
> arch/arm/boot/dts/rk3288-firefly-beta.dts | 30
> ++++++++++++++++++++++++++++++ arch/arm/boot/dts/rk3288-firefly.dts
> | 30 ++++++++++++++++++++++++++++++ arch/arm/boot/dts/rk3288-firefly.dtsi
> | 14 +++++++-------
> 3 files changed, 67 insertions(+), 7 deletions(-)
>
> diff --git a/arch/arm/boot/dts/rk3288-firefly-beta.dts
> b/arch/arm/boot/dts/rk3288-firefly-beta.dts index 75d77e3..6c08dae2
> 100644
> --- a/arch/arm/boot/dts/rk3288-firefly-beta.dts
> +++ b/arch/arm/boot/dts/rk3288-firefly-beta.dts
> @@ -69,3 +69,33 @@
> &pwm0 {
> status = "okay";
> };
> +
> +&gmac {
> + phy-supply = <&vcc_lan>;
> +};
Not 100% sure, but I guess this does not need to be duplicated.
The supply is named vcc_lan in all board revisions only the supplying
regulator seems different, so it should be enough to point the vcc_lan
phandle to the correct regulator in the relevant file, but the gmac
assignment could stay in the main file?
> +
> +&io_domains {
> + audio-supply = <&vcca_33>;
> + flash1-supply = <&vcc_lan>;
> +};
same here
> +
> +®ulators {
> + vcca_18: REG7 {
> + regulator-name = "vcca_18";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + vcca_33: REG8 {
> + regulator-name = "vcca_33";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + vcc_lan: REG9 {
> + regulator-name = "vcc_lan";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +};
> diff --git a/arch/arm/boot/dts/rk3288-firefly.dts
> b/arch/arm/boot/dts/rk3288-firefly.dts index c07fe92..1964b6f 100644
> --- a/arch/arm/boot/dts/rk3288-firefly.dts
> +++ b/arch/arm/boot/dts/rk3288-firefly.dts
> @@ -69,3 +69,33 @@
> &pwm1 {
> status = "okay";
> };
> +
> +&gmac {
> + phy-supply = <&vcc_lan>;
> +};
> +
> +&io_domains {
> + audio-supply = <&vcca_33>;
> + flash1-supply = <&vcc_lan>;
> +};
> +
> +®ulators {
> + vcca_18: REG7 {
> + regulator-name = "vcca_18";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + vcca_33: REG8 {
> + regulator-name = "vcca_33";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + vcc_lan: REG9 {
> + regulator-name = "vcc_lan";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +};
> diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi
> b/arch/arm/boot/dts/rk3288-firefly.dtsi index 1d7f03c..205348f 100644
> --- a/arch/arm/boot/dts/rk3288-firefly.dtsi
> +++ b/arch/arm/boot/dts/rk3288-firefly.dtsi
> @@ -68,11 +68,9 @@
> compatible = "rockchip,rk3288-io-voltage-domain";
> rockchip,grf = <&grf>;
>
> - audio-supply = <&vcca_33>;
> bb-supply = <&vcc_io>;
> dvp-supply = <&dovdd_1v8>;
> flash0-supply = <&vcc_flash>;
> - flash1-supply = <&vcc_lan>;
> gpio30-supply = <&vcc_io>;
> gpio1830-supply = <&vcc_io>;
> lcdc-supply = <&vcc_io>;
> @@ -225,7 +223,6 @@
> clock_in_out = "input";
> pinctrl-names = "default";
> pinctrl-0 = <&rgmii_pins>, <&phy_rst>, <&phy_pmeb>, <&phy_int>;
> - phy-supply = <&vcc_lan>;
> phy-mode = "rgmii";
> snps,reset-active-low;
> snps,reset-delays-us = <0 10000 1000000>;
> @@ -296,7 +293,7 @@
> inl2-supply = <&vcc_sys>;
> inl3-supply = <&vcc_20>;
>
> - regulators {
> + regulators: regulators {
the phandle name is to generic, as this is part of the act8846 and not
something generic. So please name the phandle act8846_regulators /
act8846_regs or so.
> vcc_ddr: REG1 {
> regulator-name = "vcc_ddr";
> regulator-min-microvolt = <1200000>;
> @@ -339,24 +336,27 @@
> regulator-always-on;
> };
>
> - vcca_18: REG7 {
> + REG7 {
> regulator-name = "vcca_18";
> regulator-min-microvolt = <1800000>;
> regulator-max-microvolt = <1800000>;
> };
>
> - vcca_33: REG8 {
> +
unecessary new empty line
> + REG8 {
> regulator-name = "vcca_33";
> regulator-min-microvolt = <3300000>;
> regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> };
>
> - vcc_lan: REG9 {
> + REG9 {
> regulator-name = "vcc_lan";
> regulator-min-microvolt = <3300000>;
> regulator-max-microvolt = <3300000>;
> };
>
> +
unecessary new empty line
> vdd_10: REG10 {
> regulator-name = "vdd_10";
> regulator-min-microvolt = <1000000>;
> --
> 2.7.4
Heiko
Powered by blists - more mailing lists