linux-kernel - Re: [PATCH 2/2] drm/vc4: Squash commit for Mario's precise vblank timestamping.

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <57812FB0.6000207@gmail.com>
Date:	Sat, 9 Jul 2016 19:09:04 +0200
From:	Mario Kleiner <mario.kleiner.de@...il.com>
To:	Eric Anholt <eric@...olt.net>, dri-devel@...ts.freedesktop.org
Cc:	linux-kernel@...r.kernel.org,
	Mario Kleiner <mario.kleiner.de@...il.com>
Subject: Re: [PATCH 2/2] drm/vc4: Squash commit for Mario's precise vblank
 timestamping.

Hi Eric,

thanks for all the infos and help! Both your patches look good and i 
have successfully tested them on top of with my vblank timestamping patch.

So for both:

Reviewed-and-tested-by: Mario Kleiner <mario.kleiner.de@...il.com>

Will you squash 2/2 into my patch or should i resend my patch with yours 
squashed in?

thanks,
-mario

On 07/08/2016 08:44 PM, Eric Anholt wrote:
> Read out the DISPBASE registers to decide on the FIFO size.
>
> Signed-off-by: Eric Anholt <eric@...olt.net>
> ---
>
> Mario: How about this for a squash into your commit?  Here are the
> values I dumped for cob_size:
>
> [    2.148314] [drm] Scaler 0 size 5232
> [    2.162239] [drm] Scaler 2 size 2048
> [    2.172957] [drm] Scaler 1 size 13456
>
>   drivers/gpu/drm/vc4/vc4_crtc.c | 23 +++++++++++++++++++++--
>   drivers/gpu/drm/vc4/vc4_regs.h | 18 +++++++++++++++++-
>   2 files changed, 38 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/vc4/vc4_crtc.c b/drivers/gpu/drm/vc4/vc4_crtc.c
> index baf962bce063..3b7db17c356d 100644
> --- a/drivers/gpu/drm/vc4/vc4_crtc.c
> +++ b/drivers/gpu/drm/vc4/vc4_crtc.c
> @@ -55,6 +55,8 @@ struct vc4_crtc {
>   	u8 lut_r[256];
>   	u8 lut_g[256];
>   	u8 lut_b[256];
> +	/* Size in pixels of the COB memory allocated to this CRTC. */
> +	u32 cob_size;
>
>   	struct drm_pending_vblank_event *event;
>   };
> @@ -195,8 +197,7 @@ int vc4_crtc_get_scanoutpos(struct drm_device *dev, unsigned int crtc_id,
>   		*hpos = 0;
>
>   	/* This is the offset we need for translating hvs -> pv scanout pos. */
> -	/* XXX Find proper formula from hw docs instead of guesstimating? */
> -	fifo_lines = 2048 * 7 / mode->crtc_hdisplay;
> +	fifo_lines = vc4_crtc->cob_size / mode->crtc_hdisplay;
>
>   	if (fifo_lines > 0)
>   		ret |= DRM_SCANOUTPOS_VALID;
> @@ -873,6 +874,22 @@ static void vc4_set_crtc_possible_masks(struct drm_device *drm,
>   	}
>   }
>
> +static void
> +vc4_crtc_get_cob_allocation(struct vc4_crtc *vc4_crtc)
> +{
> +	struct drm_device *drm = vc4_crtc->base.dev;
> +	struct vc4_dev *vc4 = to_vc4_dev(drm);
> +	u32 dispbase = HVS_READ(SCALER_DISPBASEX(vc4_crtc->channel));
> +	/* Top/base are supposed to be 4-pixel aligned, but the
> +	 * Raspberry Pi firmware fills the low bits (which are
> +	 * presumably ignored).
> +	 */
> +	u32 top = VC4_GET_FIELD(dispbase, SCALER_DISPBASEX_TOP) & ~3;
> +	u32 base = VC4_GET_FIELD(dispbase, SCALER_DISPBASEX_BASE) & ~3;
> +
> +	vc4_crtc->cob_size = top - base + 4;
> +}
> +
>   static int vc4_crtc_bind(struct device *dev, struct device *master, void *data)
>   {
>   	struct platform_device *pdev = to_platform_device(dev);
> @@ -949,6 +966,8 @@ static int vc4_crtc_bind(struct device *dev, struct device *master, void *data)
>   		crtc->cursor = cursor_plane;
>   	}
>
> +	vc4_crtc_get_cob_allocation(vc4_crtc);
> +
>   	CRTC_WRITE(PV_INTEN, 0);
>   	CRTC_WRITE(PV_INTSTAT, PV_INT_VFP_START);
>   	ret = devm_request_irq(dev, platform_get_irq(pdev, 0),
> diff --git a/drivers/gpu/drm/vc4/vc4_regs.h b/drivers/gpu/drm/vc4/vc4_regs.h
> index 63cdc28ff7bb..160942a9180e 100644
> --- a/drivers/gpu/drm/vc4/vc4_regs.h
> +++ b/drivers/gpu/drm/vc4/vc4_regs.h
> @@ -366,7 +366,6 @@
>   # define SCALER_DISPBKGND_FILL			BIT(24)
>
>   #define SCALER_DISPSTAT0                        0x00000048
> -#define SCALER_DISPBASE0                        0x0000004c
>   # define SCALER_DISPSTATX_MODE_MASK		VC4_MASK(31, 30)
>   # define SCALER_DISPSTATX_MODE_SHIFT		30
>   # define SCALER_DISPSTATX_MODE_DISABLED		0
> @@ -379,6 +378,20 @@
>   # define SCALER_DISPSTATX_FRAME_COUNT_SHIFT	12
>   # define SCALER_DISPSTATX_LINE_MASK		VC4_MASK(11, 0)
>   # define SCALER_DISPSTATX_LINE_SHIFT		0
> +
> +#define SCALER_DISPBASE0                        0x0000004c
> +/* Last pixel in the COB (display FIFO memory) allocated to this HVS
> + * channel.  Must be 4-pixel aligned (and thus 4 pixels less than the
> + * next COB base).
> + */
> +# define SCALER_DISPBASEX_TOP_MASK		VC4_MASK(31, 16)
> +# define SCALER_DISPBASEX_TOP_SHIFT		16
> +/* First pixel in the COB (display FIFO memory) allocated to this HVS
> + * channel.  Must be 4-pixel aligned.
> + */
> +# define SCALER_DISPBASEX_BASE_MASK		VC4_MASK(15, 0)
> +# define SCALER_DISPBASEX_BASE_SHIFT		0
> +
>   #define SCALER_DISPCTRL1                        0x00000050
>   #define SCALER_DISPBKGND1                       0x00000054
>   #define SCALER_DISPBKGNDX(x)			(SCALER_DISPBKGND0 +        \
> @@ -389,6 +402,9 @@
>   						 (x) * (SCALER_DISPSTAT1 - \
>   							SCALER_DISPSTAT0))
>   #define SCALER_DISPBASE1                        0x0000005c
> +#define SCALER_DISPBASEX(x)			(SCALER_DISPBASE0 +        \
> +						 (x) * (SCALER_DISPBASE1 - \
> +							SCALER_DISPBASE0))
>   #define SCALER_DISPCTRL2                        0x00000060
>   #define SCALER_DISPCTRLX(x)			(SCALER_DISPCTRL0 +        \
>   						 (x) * (SCALER_DISPCTRL1 - \
>