Date:	Sat, 9 Jul 2016 10:00:54 +0530
From:	Rajesh Bhagat <rajesh.bhagat@....com>
To:	<linux-usb@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
	<devicetree@...r.kernel.org>
CC:	<Peter.Chen@....com>, <gregkh@...uxfoundation.org>,
	<kishon@...com>, <robh+dt@...nel.org>, <shawnguo@...nel.org>,
	<linux-arm-kernel@...ts.infradead.org>,
	Rajesh Bhagat <rajesh.bhagat@....com>
Subject: [PATCH v2 3/5] drivers: usb: phy: Add qoriq usb 2.0 phy driver support

Adds qoriq usb 2.0 phy driver support for LS1021A and LS1012A
platform.

Signed-off-by: Rajesh Bhagat <rajesh.bhagat@....com>
---
Changes in v2:
 - Replaced Freescale with QorIQ in comments section
 - Changed the compatible string to fsl,qoriq-usb2-phy and added version
 - Added dependency on ARCH_MXC/ARCH_LAYERSCAPE and OF in Kconfig
 - Dropped CONFIG_ULPI #ifdefs to make code generic
 - Removed calls to devm free/release calls

 drivers/phy/Kconfig          |   8 ++
 drivers/phy/Makefile         |   1 +
 drivers/phy/phy-qoriq-usb2.c | 228 +++++++++++++++++++++++++++++++++++++++++++
 drivers/phy/phy-qoriq-usb2.h |  50 ++++++++++
 4 files changed, 287 insertions(+)
 create mode 100644 drivers/phy/phy-qoriq-usb2.c
 create mode 100644 drivers/phy/phy-qoriq-usb2.h

diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index b869b98..cc69299 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -434,4 +434,12 @@ config PHY_CYGNUS_PCIE
 
 source "drivers/phy/tegra/Kconfig"
 
+config PHY_QORIQ_USB2
+	tristate "QorIQ USB 2.0 PHY driver"
+	depends on ARCH_MXC || ARCH_LAYERSCAPE
+	depends on OF
+	select GENERIC_PHY
+	help
+	  Enable this to support the USB2.0 PHY on the QorIQ SoC.
+
 endmenu
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index 9c3e73c..044105a 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -53,5 +53,6 @@ obj-$(CONFIG_PHY_TUSB1210)		+= phy-tusb1210.o
 obj-$(CONFIG_PHY_BRCM_SATA)		+= phy-brcm-sata.o
 obj-$(CONFIG_PHY_PISTACHIO_USB)		+= phy-pistachio-usb.o
 obj-$(CONFIG_PHY_CYGNUS_PCIE)		+= phy-bcm-cygnus-pcie.o
+obj-$(CONFIG_PHY_QORIQ_USB2)            += phy-qoriq-usb2.o
 
 obj-$(CONFIG_ARCH_TEGRA) += tegra/
diff --git a/drivers/phy/phy-qoriq-usb2.c b/drivers/phy/phy-qoriq-usb2.c
new file mode 100644
index 0000000..f74d255
--- /dev/null
+++ b/drivers/phy/phy-qoriq-usb2.c
@@ -0,0 +1,228 @@
+/*
+ * QorIQ SoC USB 2.0 PHY driver
+ *
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Author: Rajesh Bhagat <rajesh.bhagat@....com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/usb/of.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/phy/phy.h>
+#include <linux/usb/phy.h>
+#include <linux/usb/ulpi.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+
+#include "phy-qoriq-usb2.h"
+
+static int qoriq_usb2_phy_init(struct phy *_phy)
+{
+	struct qoriq_usb2_phy_ctx *ctx = phy_get_drvdata(_phy);
+	struct device *dev = ctx->dev;
+
+	if (ctx->ulpi_phy) {
+		if (usb_phy_init(ctx->ulpi_phy)) {
+			dev_err(dev, "unable to init transceiver, probably missing\n");
+			return -ENODEV;
+		}
+	}
+
+	return 0;
+}
+
+static int qoriq_usb2_phy_power_on(struct phy *_phy)
+{
+	struct qoriq_usb2_phy_ctx *ctx = phy_get_drvdata(_phy);
+	u32 flags;
+
+	if (ctx->ulpi_phy) {
+		flags = usb_phy_io_read(ctx->ulpi_phy, ULPI_OTG_CTRL);
+		usb_phy_io_write(ctx->ulpi_phy, flags |
+				 (ULPI_OTG_CTRL_DRVVBUS_EXT |
+				 ULPI_OTG_CTRL_EXTVBUSIND), ULPI_OTG_CTRL);
+		flags = usb_phy_io_read(ctx->ulpi_phy, ULPI_IFC_CTRL);
+		usb_phy_io_write(ctx->ulpi_phy, flags |
+				 (ULPI_IFC_CTRL_EXTERNAL_VBUS |
+				 ULPI_IFC_CTRL_PASSTHRU), ULPI_IFC_CTRL);
+	}
+
+	return 0;
+}
+
+static int qoriq_usb2_phy_power_off(struct phy *_phy)
+{
+	/* TODO: Add logic to power off phy */
+
+	return 0;
+}
+
+static int qoriq_usb2_phy_exit(struct phy *_phy)
+{
+	struct qoriq_usb2_phy_ctx *ctx = phy_get_drvdata(_phy);
+
+	if (ctx->ulpi_phy)
+		usb_phy_shutdown(ctx->ulpi_phy);
+
+	return 0;
+}
+
+static const struct phy_ops ops = {
+	.init		= qoriq_usb2_phy_init,
+	.power_on	= qoriq_usb2_phy_power_on,
+	.power_off	= qoriq_usb2_phy_power_off,
+	.exit		= qoriq_usb2_phy_exit,
+	.owner		= THIS_MODULE,
+};
+
+
+static enum qoriq_usb2_phy_ver of_usb_get_phy_version(struct device_node *np)
+{
+	enum qoriq_usb2_phy_ver phy_version = QORIQ_PHY_UNKNOWN;
+
+	if (of_device_is_compatible(np, "fsl,qoriq-usb2-phy")) {
+		if (of_device_is_compatible(np, "fsl,qoriq-usb2-phy-v1.0"))
+			phy_version = QORIQ_PHY_LEGACY;
+		else if (of_device_is_compatible(np, "fsl,qoriq-usb2-phy-v2.0"))
+			phy_version = QORIQ_PHY_NXP_ISP1508;
+	}
+	return phy_version;
+}
+
+static int qoriq_usb2_phy_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct resource *res;
+	struct qoriq_usb2_phy_ctx *ctx;
+	struct device *dev = &pdev->dev;
+	const struct of_device_id *of_id;
+	struct phy_provider *phy_provider;
+	struct device_node *np = pdev->dev.of_node;
+
+	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
+	if (!ctx)
+		return -ENOMEM;
+
+	ctx->dev = dev;
+
+	of_id = of_match_device(dev->driver->of_match_table, dev);
+	if (!of_id) {
+		dev_err(dev, "failed to get device match\n");
+		ret = -EINVAL;
+		goto err_out;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(dev, "failed to get I/O memory\n");
+		ret = -ENOENT;
+		goto err_out;
+	}
+
+	ctx->regs = devm_ioremap(dev, res->start, resource_size(res));
+	if (!ctx->regs) {
+		dev_err(dev, "failed to remap I/O memory\n");
+		ret = -ENOMEM;
+		goto err_out;
+	}
+
+	platform_set_drvdata(pdev, ctx);
+
+	ctx->phy = devm_phy_create(ctx->dev, NULL, &ops);
+	if (IS_ERR(ctx->phy)) {
+		dev_err(dev, "failed to create PHY\n");
+		ret = PTR_ERR(ctx->phy);
+		goto err_out;
+	}
+	phy_set_drvdata(ctx->phy, ctx);
+
+	ctx->phy_version = of_usb_get_phy_version(np);
+	if (ctx->phy_version == QORIQ_PHY_UNKNOWN) {
+		ret = -EINVAL;
+		dev_err(dev, "failed to get PHY version\n");
+		goto err_out;
+	}
+
+	ctx->phy_type = of_usb_get_phy_mode(np);
+	switch (ctx->phy_type) {
+	case USBPHY_INTERFACE_MODE_ULPI:
+		switch (ctx->phy_version) {
+		case QORIQ_PHY_NXP_ISP1508:
+			ctx->ulpi_phy = qoriq_otg_ulpi_create(0);
+			if (!ctx->ulpi_phy) {
+				dev_err(dev, "qoriq_otg_ulpi_create returned NULL\n");
+				ret = -ENOMEM;
+				goto err_out;
+			}
+			ctx->ulpi_phy->io_priv = ctx->regs + ULPI_VIEWPORT;
+			break;
+		default:
+			ctx->ulpi_phy = NULL;
+			break;
+		}
+		break;
+	default:
+		dev_err(&pdev->dev, "phy_type %d is invalid or unsupported\n",
+			ctx->phy_type);
+		ret = -EINVAL;
+		goto err_out;
+	}
+
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+	if (IS_ERR(phy_provider)) {
+		dev_err(dev, "failed to register phy_provider\n");
+		ret = PTR_ERR_OR_ZERO(phy_provider);
+		goto err_out;
+	}
+
+	dev_dbg(dev, "initialized\n");
+	return 0;
+
+err_out:
+	return ret;
+}
+
+static int qoriq_usb2_phy_remove(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct qoriq_usb2_phy_ctx *ctx = platform_get_drvdata(pdev);
+
+	devm_phy_destroy(ctx->dev, ctx->phy);
+	devm_iounmap(dev, ctx->regs);
+	dev_dbg(dev, "de-initialized\n");
+	return 0;
+}
+
+static const struct of_device_id qoriq_usb2_phy_dt_ids[] = {
+	{ .compatible = "fsl,qoriq-usb2-phy"},
+	{}
+};
+
+MODULE_DEVICE_TABLE(of, qoriq_usb2_phy_dt_ids);
+
+static struct platform_driver qoriq_usb2_phy_driver = {
+	.probe		= qoriq_usb2_phy_probe,
+	.remove		= qoriq_usb2_phy_remove,
+	.driver		= {
+		.name	= "qoriq_usb2_phy",
+		.owner		= THIS_MODULE,
+		.of_match_table = of_match_ptr(qoriq_usb2_phy_dt_ids),
+	},
+};
+
+module_platform_driver(qoriq_usb2_phy_driver);
+
+MODULE_ALIAS("platform:qoriq-usb2-phy");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("QorIQ SoC USB PHY driver");
+MODULE_AUTHOR("Rajesh Bhagat <rajesh.bhagat@....com>");
diff --git a/drivers/phy/phy-qoriq-usb2.h b/drivers/phy/phy-qoriq-usb2.h
new file mode 100644
index 0000000..47c37a5
--- /dev/null
+++ b/drivers/phy/phy-qoriq-usb2.h
@@ -0,0 +1,50 @@
+/*
+ * Freescale SoC USB 2.0 PHY driver
+ *
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Author: Rajesh Bhagat <rajesh.bhagat@....com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#ifndef _PHY_QORIQ_USB2_H
+#define _PHY_QORIQ_USB2_H
+
+#include <linux/clk.h>
+#include <linux/phy/phy.h>
+#include <linux/device.h>
+#include <linux/regmap.h>
+
+#define ULPI_VIEWPORT           0x170
+
+enum qoriq_usb2_phy_ver {
+	QORIQ_PHY_LEGACY,
+	QORIQ_PHY_NXP_ISP1508,
+	QORIQ_PHY_UNKNOWN,
+};
+
+struct qoriq_usb2_phy_ctx {
+	struct phy *phy;
+	struct clk *clk;
+	struct device *dev;
+	void __iomem *regs;
+	struct usb_phy *ulpi_phy;
+	enum usb_phy_interface phy_type;
+	enum qoriq_usb2_phy_ver phy_version;
+};
+
+#ifdef CONFIG_USB_ULPI_VIEWPORT
+static inline struct usb_phy *qoriq_otg_ulpi_create(unsigned int flags)
+{
+	return otg_ulpi_create(&ulpi_viewport_access_ops, flags);
+}
+#else
+static inline struct usb_phy *qoriq_otg_ulpi_create(unsigned int flags)
+{
+	return NULL;
+}
+#endif
+
+#endif
-- 
2.6.2.198.g614a2ac

Powered by blists - more mailing lists