linux-kernel - [PATCH v3 0/3] watchdog: Add Amlogic Meson GXBB Watchdog Timer driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <1468141867-4172-1-git-send-email-narmstrong@baylibre.com>
Date:	Sun, 10 Jul 2016 11:11:03 +0200
From:	Neil Armstrong <narmstrong@...libre.com>
To:	Wim Van Sebroeck <wim@...ana.be>,
	Guenter Roeck <linux@...ck-us.net>
Cc:	Neil Armstrong <narmstrong@...libre.com>,
	linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
	linux-amlogic@...ts.infradead.org, linux-watchdog@...r.kernel.org
Subject: [PATCH v3 0/3] watchdog: Add Amlogic Meson GXBB Watchdog Timer driver

Adds support for the Amlogic Meson GXBB SoC Watchdog Timer.
It differs from the meson6/meson8b HW, so need for a separate driver.
The HW provides a divider capable of having a 1ms timebase thus simplifying
the counter update.
The restart call is not provided even if the HW is capable of triggering a
system reset immediately because of the PSCI firmare having such functionnality.
The watchdog is not expected to be running at boot time since there is a separate
system-level watchdog running from the SCPI co-processor, but this case would be
handle in a next driver update.

Changes since v2 at http://lkml.kernel.org/r/1464943007-18000-1-git-send-email-narmstrong@baylibre.com :
- Fix set_timeout behaviour

Changes since v1 at http://lkml.kernel.org/r/1464614948-28247-1-git-send-email-narmstrong@baylibre.com :
- Update default timeout to 30sec
- Add separate CONFIG_
- Remove unused defines & functions
- Fix indentation
- Check set_timeout max value
- Reorder includes alphabetically
- Switch to human identify string
- clk_disable_unprepare on probe failure or removal

Changes since RFC version at http://lkml.kernel.org/r/1464249112-13658-1-git-send-email-narmstrong@baylibre.com :
- Remove status callback, will re-introduce it later to managed the already-running use case
- Fix registers defines indentation
- Fix space between operators
- Make all callbacks static functions
- Fix bindings with missing clocks attribute
- Do not stop/start watchdog on a timeout setup
- Fix probe device configuration

Neil Armstrong (3):
  watchdog: Add Meson GXBB Watchdog Driver
  dt-bindings: watchdog: Add Meson GXBB Watchdog bindings
  ARM64: dts: amlogic: meson-gxbb: Add watchdog node

 .../bindings/watchdog/meson-gxbb-wdt.txt           |  16 ++
 arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi        |   6 +
 drivers/watchdog/Kconfig                           |  10 +
 drivers/watchdog/Makefile                          |   1 +
 drivers/watchdog/meson_gxbb_wdt.c                  | 270 +++++++++++++++++++++
 5 files changed, 303 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/watchdog/meson-gxbb-wdt.txt
 create mode 100644 drivers/watchdog/meson_gxbb_wdt.c

-- 
2.7.0