[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20160711091729.57e67114@pluto.restena.lu>
Date: Mon, 11 Jul 2016 09:17:29 +0200
From: Bruno Prémont <bonbons@...ux-vserver.org>
To: Thorsten Leemhuis <regressions@...mhuis.info>
Cc: Quinn Tran <quinn.tran@...gic.com>,
Himanshu Madhani <himanshu.madhani@...gic.com>,
Nicholas Bellinger <nab@...ux-iscsi.org>,
qla2xxx-upstream@...gic.com,
"James E.J. Bottomley" <jejb@...ux.vnet.ibm.com>,
"Martin K. Petersen" <martin.petersen@...cle.com>,
linux-scsi@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH] qla2xxx: Fix NULL pointer deref in QLA interrupt
On Fri, 8 Jul 2016 09:27:18 +0200 Thorsten Leemhuis wrote:
> Bruno Prémont wrote on 30.06.2016 17:00:
> > In qla24xx_process_response_queue() rsp->msix->cpuid may trigger NULL
> > pointer dereference when rsp->msix is NULL:
> > […]
> > The affected code was introduced by commit cdb898c52d1dfad4b4800b83a58b3fe5d352edde
> > (qla2xxx: Add irq affinity notification).
> >
> > Only dereference rsp->msix when it has been set so the machine can boot
> > fine. Possibly rsp->msix is unset because:
> > [ 3.479679] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.33-k.
> > [ 3.481839] qla2xxx [0000:13:00.0]-001d: : Found an ISP2432 irq 17 iobase 0xffffc90000038000.
> > [ 3.484081] qla2xxx [0000:13:00.0]-0035:0: MSI-X; Unsupported ISP2432 (0x2, 0x3).
> > [ 3.485804] qla2xxx [0000:13:00.0]-0037:0: Falling back-to MSI mode -258.
> > [ 3.890145] scsi host0: qla2xxx
> > [ 3.891956] qla2xxx [0000:13:00.0]-00fb:0: QLogic QLE2460 - PCI-Express Single Channel 4Gb Fibre Channel HBA.
> > [ 3.894207] qla2xxx [0000:13:00.0]-00fc:0: ISP2432: PCIe (2.5GT/s x4) @ 0000:13:00.0 hdma+ host#=0 fw=7.03.00 (9496).
> > [ 5.714774] qla2xxx [0000:13:00.0]-500a:0: LOOP UP detected (4 Gbps).
>
> Bruno: Does that mean you actually tested that patch and it fixed the
> problem for you? It looks like it, but there is some confusion about it;
> that's one of the reasons why this patch didn't get any further yet
> afaics, so a quick clarification might help to finally get this fixed
> properly in mainline and stable.
Yes, it does fix the Oops for me.
I did not analyze the reason why rsp->msix is NULL (no idea if
it remains NULL forever on my hardware) - I just extracted messages
from qla driver shown during boot which seem to indicate a possible
reason why msix is NULL.
Further analysis should be done by someone with better knowledge of qla
driver than mine though I would be happy to perform tests.
Bruno
> Himanshu: While at it: Can you confirm this patch should get merged to
> mainline? Seems Quinn is on PTO and his out-of-office reply mentioned
> you as one point of contact.
>
> Cheers, your regression tracker for Linux 4.7
> Thorsten
>
> > CC: <stable@...r.kernel.org>
> > Signed-off-by: Bruno Prémont <bonbons@...ux-vserver.org>
> > ---
> > diff --git a/drivers/scsi/qla2xxx/qla_isr.c
> > b/drivers/scsi/qla2xxx/qla_isr.c index 5649c20..a92a62d 100644
> > --- a/drivers/scsi/qla2xxx/qla_isr.c
> > +++ b/drivers/scsi/qla2xxx/qla_isr.c
> > @@ -2548,7 +2548,7 @@ void qla24xx_process_response_queue(struct
> > scsi_qla_host *vha, if (!vha->flags.online)
> > return;
> >
> > - if (rsp->msix->cpuid != smp_processor_id()) {
> > + if (rsp->msix && rsp->msix->cpuid != smp_processor_id()) {
> > /* if kernel does not notify qla of IRQ's CPU change,
> > * then set it here.
> > */
> >
> > http://news.gmane.org/find-root.php?message_id=20160630170032.6dbaf496%40pluto.restena.lu
> > http://mid.gmane.org/20160630170032.6dbaf496%40pluto.restena.lu
> >
Powered by blists - more mailing lists