lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <57836246.3010800@ti.com>
Date:	Mon, 11 Jul 2016 14:39:26 +0530
From:	Keerthy <a0393675@...com>
To:	dawei chien <dawei.chien@...iatek.com>
CC:	Zhang Rui <rui.zhang@...el.com>,
	Eduardo Valentin <edubezval@...il.com>,
	Rob Herring <robh+dt@...nel.org>,
	Pawel Moll <pawel.moll@....com>,
	Mark Rutland <mark.rutland@....com>,
	Ian Campbell <ijc+devicetree@...lion.org.uk>,
	Kumar Gala <galak@...eaurora.org>,
	Russell King <linux@...linux.org.uk>,
	Matthias Brugger <matthias.bgg@...il.com>,
	<linux-pm@...r.kernel.org>, <devicetree@...r.kernel.org>,
	<linux-kernel@...r.kernel.org>,
	<linux-arm-kernel@...ts.infradead.org>,
	<linux-mediatek@...ts.infradead.org>,
	<srv_heupstream@...iatek.com>,
	Sascha Hauer <kernel@...gutronix.de>,
	Fan Chen <fan.chen@...iatek.com>,
	Eddie Huang <eddie.huang@...iatek.com>,
	Yingjoe Chen <yingjoe.chen@...iatek.com>,
	Erin Lo <erin.lo@...iatek.com>
Subject: Re: [PATCH 3/3] arm: dts: thermal: add thermal/auxadc node.



On Monday 11 July 2016 02:26 PM, dawei chien wrote:
> Dear Keerthy,
>
> On Thu, 2016-07-07 at 17:39 +0530, Keerthy wrote:
>>
>> On Thursday 07 July 2016 02:36 PM, Dawei Chien wrote:
>>> This adds the thermal controller and auxadc nodes
>>> to the Mediatek MT2701 dtsi file.
>>>
>>> Signed-off-by: Dawei Chien <dawei.chien@...iatek.com>
>>> ---
>>> This patch depned on:
>>> https://patchwork.kernel.org/patch/9213545/
>>> ---
>>>    arch/arm/boot/dts/mt2701.dtsi |   43 +++++++++++++++++++++++++++++++++++++++++
>>>    1 file changed, 43 insertions(+)
>>>
>>> diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi
>>> index 2ac8b50..0834a23 100644
>>> --- a/arch/arm/boot/dts/mt2701.dtsi
>>> +++ b/arch/arm/boot/dts/mt2701.dtsi
>>> @@ -77,6 +77,36 @@
>>>    		#clock-cells = <0>;
>>>    	};
>>>
>>> +	thermal-zones {
>>> +		cpu_thermal: cpu_thermal {
>>> +			polling-delay-passive = <1000>; /* milliseconds */
>>> +			polling-delay = <1000>; /* milliseconds */
>>> +
>>> +			thermal-sensors = <&thermal 0>;
>>> +			sustainable-power = <1000>;
>>> +
>>> +			trips {
>>> +				threshold: trip-point@0 {
>>> +					temperature = <68000>;
>>> +					hysteresis = <2000>;
>>> +					type = "passive";
>>> +				};
>>> +
>>> +				target: trip-point@1 {
>>> +					temperature = <85000>;
>>> +					hysteresis = <2000>;
>>> +					type = "passive";
>>> +				};
>>> +
>>> +				cpu_crit: cpu_crit@0 {
>>> +					temperature = <115000>;
>>> +					hysteresis = <2000>;
>>> +					type = "critical";
>>> +				};
>>> +			};
>>> +		};
>>> +	};
>>> +
>>
>> are there any corresponding cooling-maps?
>
> Since MT2701 does not register CPUFREQ cooling device and its' own
> device node, I could not add cooling-maps so far.
> Could we add cooling map after CPUFREQ ready, thank you.

Okay. I was curious to know about the cooling agents.

>
>>
>>>    	timer {
>>>    		compatible = "arm,armv7-timer";
>>>    		interrupt-parent = <&gic>;
>>> @@ -183,4 +213,17 @@
>>>    		clocks = <&uart_clk>;
>>>    		status = "disabled";
>>>    	};
>>> +
>>> +	thermal: thermal@...0b000 {
>>> +		#thermal-sensor-cells = <0>;
>>> +		compatible = "mediatek,mt2701-thermal";
>>> +		reg = <0 0x1100b000 0 0x1000>;
>>> +		interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_LOW>;
>>> +		clocks = <&pericfg CLK_PERI_THERM>, <&pericfg CLK_PERI_AUXADC>;
>>> +		clock-names = "therm", "auxadc";
>>> +		resets = <&pericfg 0x10>;
>>> +		reset-names = "therm";
>>> +		mediatek,auxadc = <&auxadc>;
>>> +		mediatek,apmixedsys = <&apmixedsys>;
>>> +	};
>>>    };
>>>
>
>

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ