| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <578708D5.6050009@iommu.org>
Date: Thu, 14 Jul 2016 11:36:53 +0800
From: Wan Zongshun <vw@...mu.org>
To: Jason Cooper <jason@...edaemon.net>
Cc: linux-arm-kernel@...ts.infradead.org,
Russell King <linux@...linux.org.uk>,
devicetree@...r.kernel.org, linux-clk@...r.kernel.org,
Arnd Bergmann <arnd@...db.de>,
Daniel Lezcano <daniel.lezcano@...aro.org>,
Thomas Gleixner <tglx@...utronix.de>,
linux-kernel@...r.kernel.org, robh@...nel.org,
p.zabel@...gutronix.de, Wan Zongshun <mcuos.com@...il.com>
Subject: Re: [PATCH v2 02/10] irqchip: add irqchip driver for nuc900
On 2016年07月14日 04:09, Jason Cooper wrote:
> Hi Wan Zongshun,
>
> On Sun, Jul 10, 2016 at 03:27:22PM +0800, Wan Zongshun wrote:
>> This patch is to add irqchip driver support for nuc900 plat,
>> current this driver only supports nuc970 SoC.
>>
>> Signed-off-by: Wan Zongshun <mcuos.com@...il.com>
>> ---
>> arch/arm/mach-w90x900/include/mach/irqs.h | 5 +
>> drivers/irqchip/Makefile | 1 +
>> drivers/irqchip/irq-nuc900.c | 150 ++++++++++++++++++++++++++++++
>> 3 files changed, 156 insertions(+)
>> create mode 100644 drivers/irqchip/irq-nuc900.c
>>
>> diff --git a/arch/arm/mach-w90x900/include/mach/irqs.h b/arch/arm/mach-w90x900/include/mach/irqs.h
>> index 9d5cba3..3b035c6 100644
>> --- a/arch/arm/mach-w90x900/include/mach/irqs.h
>> +++ b/arch/arm/mach-w90x900/include/mach/irqs.h
>> @@ -59,7 +59,12 @@
>> #define IRQ_KPI W90X900_IRQ(29)
>> #define IRQ_P2SGROUP W90X900_IRQ(30)
>> #define IRQ_ADC W90X900_IRQ(31)
>> +
>> +#if !defined(CONFIG_SOC_NUC900)
>> #define NR_IRQS (IRQ_ADC+1)
>> +#else
>> +#define NR_IRQS 62
>> +#endif
>
> Arnd already covered this...
>
>>
>> /*for irq group*/
>>
>> diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
>> index 38853a1..9ccd5af8a 100644
>> --- a/drivers/irqchip/Makefile
>> +++ b/drivers/irqchip/Makefile
>> @@ -69,3 +69,4 @@ obj-$(CONFIG_PIC32_EVIC) += irq-pic32-evic.o
>> obj-$(CONFIG_MVEBU_ODMI) += irq-mvebu-odmi.o
>> obj-$(CONFIG_LS_SCFG_MSI) += irq-ls-scfg-msi.o
>> obj-$(CONFIG_EZNPS_GIC) += irq-eznps.o
>> +obj-$(CONFIG_SOC_NUC970) += irq-nuc900.o
>> diff --git a/drivers/irqchip/irq-nuc900.c b/drivers/irqchip/irq-nuc900.c
>> new file mode 100644
>> index 0000000..c4b2e39
>> --- /dev/null
>> +++ b/drivers/irqchip/irq-nuc900.c
>> @@ -0,0 +1,150 @@
>> +/*
>> + * Copyright 2016 Wan Zongshun <mcuos.com@...il.com>
>> + *
>> + * The code contained herein is licensed under the GNU General Public
>> + * License. You may obtain a copy of the GNU General Public License
>> + * Version 2 or later at the following locations:
>> + *
>> + * http://www.opensource.org/licenses/gpl-license.html
>> + * http://www.gnu.org/copyleft/gpl.html
>> + */
>> +
>> +#include <linux/module.h>
>> +#include <linux/init.h>
>> +#include <linux/irq.h>
>> +#include <linux/irqchip.h>
>> +#include <linux/irqdomain.h>
>> +#include <linux/io.h>
>> +#include <linux/ioport.h>
>> +#include <linux/of_address.h>
>> +#include <linux/of_irq.h>
>> +
>> +#include <asm/exception.h>
>> +#include <asm/hardirq.h>
>> +
>> +#define REG_AIC_SCR1 0x00
>> +#define REG_AIC_SCR2 0x04
>> +#define REG_AIC_SCR3 0x08
>> +#define REG_AIC_SCR4 0x0C
>> +#define REG_AIC_SCR5 0x10
>> +#define REG_AIC_SCR6 0x14
>> +#define REG_AIC_SCR7 0x18
>> +#define REG_AIC_SCR8 0x1C
>> +#define REG_AIC_SCR9 0x20
>> +#define REG_AIC_SCR10 0x24
>> +#define REG_AIC_SCR11 0x28
>> +#define REG_AIC_SCR12 0x2C
>> +#define REG_AIC_SCR13 0x30
>> +#define REG_AIC_SCR14 0x34
>> +#define REG_AIC_SCR15 0x38
>> +#define REG_AIC_IRSR 0x100
>> +#define REG_AIC_IRSRH 0x104
>> +#define REG_AIC_IASR 0x108
>> +#define REG_AIC_IASRH 0x10C
>> +#define REG_AIC_ISR 0x110
>> +#define REG_AIC_ISRH 0x114
>> +#define REG_AIC_IPER 0x118
>> +#define REG_AIC_ISNR 0x120
>> +#define REG_AIC_OISR 0x124
>> +#define REG_AIC_IMR 0x128
>> +#define REG_AIC_IMRH 0x12C
>> +#define REG_AIC_MECR 0x130
>> +#define REG_AIC_MECRH 0x134
>> +#define REG_AIC_MDCR 0x138
>> +#define REG_AIC_MDCRH 0x13C
>> +#define REG_AIC_SSCR 0x140
>> +#define REG_AIC_SSCRH 0x144
>> +#define REG_AIC_SCCR 0x148
>> +#define REG_AIC_SCCRH 0x14C
>> +#define REG_AIC_EOSCR 0x150
>
> Please remove unused defines.
Okay.
>
>> +
>> +static void __iomem *aic_base;
>> +static struct irq_domain *aic_domain;
>> +
>> +static void nuc900_irq_mask(struct irq_data *d)
>> +{
>> + if (d->irq < 32)
>> + writel(1 << (d->irq), aic_base + REG_AIC_MDCR);
>> + else
>> + writel(1 << (d->irq - 32), aic_base + REG_AIC_MDCRH);
>> +}
>> +
>> +static void nuc900_irq_ack(struct irq_data *d)
>> +{
>> + writel(0x01, aic_base + REG_AIC_EOSCR);
>> +}
>> +
>> +static void nuc900_irq_unmask(struct irq_data *d)
>> +{
>> + if (d->irq < 32)
>> + writel(1 << (d->irq), aic_base + REG_AIC_MECR);
>> + else
>> + writel(1 << (d->irq - 32), aic_base + REG_AIC_MECRH);
>> +}
>> +
>> +static struct irq_chip nuc900_irq_chip = {
>> + .irq_ack = nuc900_irq_ack,
>> + .irq_mask = nuc900_irq_mask,
>> + .irq_unmask = nuc900_irq_unmask,
>> +};
>> +
>> +void __exception_irq_entry aic_handle_irq(struct pt_regs *regs)
>> +{
>> + u32 hwirq;
>> +
>> + hwirq = readl(aic_base + REG_AIC_IPER);
>> + hwirq = readl(aic_base + REG_AIC_ISNR);
>> + if (!hwirq)
>> + writel(0x01, aic_base + REG_AIC_EOSCR);
>
> Could you explain what's going on here?
AIC_IPER, When the AIC generates the interrupt, VECTOR represents the
interrupt channel number that is active, enabled, and has the highest
priority.
The value of VECTOR is copied to the register AIC_ISNR thereafter by the
AIC. This register was restored a value 0 after it was read by the
interrupt handler.
So I must read two registers for one irq number, after read IPER, the
ISNR(bit0:5) will be updated. ISNR value has no need do offset, it is
better than read IPER(bit2:7).
“writel(0x01, aic_base + REG_AIC_EOSCR);” seems not necessary here,
since irqchip has the ack interface. I will remove it.
This AIC_EOSCR register is used by the interrupt service routine to
indicate that it is completely served. Thus, the
interrupt handler can write any value to this register to indicate the
end of its interrupt service.
>
>> +
>> + handle_IRQ((irq_find_mapping(aic_domain, hwirq)), regs);
>> +}
>> +
>> +static int aic_irq_domain_map(struct irq_domain *d, unsigned int virq,
>> + irq_hw_number_t hw)
>> +{
>> + irq_set_chip_and_handler(virq, &nuc900_irq_chip, handle_level_irq);
>> + irq_clear_status_flags(virq, IRQ_NOREQUEST);
>> +
>> + return 0;
>> +}
>> +
>> +static struct irq_domain_ops aic_irq_domain_ops = {
>> + .map = aic_irq_domain_map,
>> + .xlate = irq_domain_xlate_onecell,
>> +};
>> +
>> +static int __init aic_of_init(struct device_node *node,
>> + struct device_node *parent)
>> +{
>> + int ret;
>> +
>> + aic_base = of_iomap(node, 0);
>> + if (!aic_base) {
>> + ret = -ENOMEM;
>> + pr_err("%s: unable to map registers\n", node->full_name);
>> + goto err_iomap;
>> + }
>> +
>> + writel(0xFFFFFFFC, aic_base + REG_AIC_MDCR);
>> + writel(0xFFFFFFFF, aic_base + REG_AIC_MDCRH);
>> +
>> + aic_domain = irq_domain_add_linear(node, NR_IRQS,
>> + &aic_irq_domain_ops, NULL);
>> +
>> + if (!aic_domain) {
>> + ret = -ENOMEM;
>> + pr_err("%s: unable to create IRQ domain\n", node->full_name);
>> + goto err_aic_domain;
>> + }
>> +
>> + set_handle_irq(aic_handle_irq);
>> + return 0;
>> +
>> +err_aic_domain:
>> + iounmap(aic_base);
>> +err_iomap:
>> + return ret;
>> +}
>> +
>> +IRQCHIP_DECLARE(nuc900, "nuvoton,nuc900-aic", aic_of_init);
>
> afaict, there is no 'nuc900', that's a family. If so, this compatible
> needs to be 'nuvoton,nuc970-aic'.
>
IRQCHIP_DECLARE(nuvoton, "nuvoton,nuc900-aic", aic_of_init);, change
nuc900 to nuvoton, ok?
> thx,
>
> Jason.
>
>
Powered by blists - more mailing lists