linux-kernel - [PATCH 04/10] Documentation: dt: socfpga: Add Arria10 QSPI EDAC binding

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1468512408-5156-5-git-send-email-tthayer@opensource.altera.com>
Date:	Thu, 14 Jul 2016 11:06:42 -0500
From:	<tthayer@...nsource.altera.com>
To:	<bp@...en8.de>, <dougthompson@...ssion.com>,
	<m.chehab@...sung.com>, <robh+dt@...nel.org>, <pawel.moll@....com>,
	<mark.rutland@....com>, <ijc+devicetree@...lion.org.uk>,
	<galak@...eaurora.org>, <linux@....linux.org.uk>,
	<dinguyen@...nsource.altera.com>, <grant.likely@...aro.org>
CC:	<devicetree@...r.kernel.org>, <linux-doc@...r.kernel.org>,
	<linux-edac@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
	<linux-arm-kernel@...ts.infradead.org>, <tthayer.linux@...il.com>,
	<tthayer@...nsource.altera.com>
Subject: [PATCH 04/10] Documentation: dt: socfpga: Add Arria10 QSPI EDAC binding

From: Thor Thayer <tthayer@...nsource.altera.com>

Add the device tree bindings needed to support the Altera QSPI
FIFO buffer EDAC on the Arria10 chip.

Signed-off-by: Thor Thayer <tthayer@...nsource.altera.com>
---
 .../bindings/arm/altera/socfpga-eccmgr.txt         |   16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt b/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt
index 3ffeb12..ee66df0 100644
--- a/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt
+++ b/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt
@@ -114,6 +114,14 @@ Required Properties:
 - interrupts      : Should be single bit error interrupt, then double bit error
 	interrupt, in this order.
 
+QSPI FIFO ECC
+Required Properties:
+- compatible      : Should be "altr,socfpga-qspi-ecc"
+- reg             : Address and size for ECC block registers.
+- altr,ecc-parent : phandle to parent QSPI node.
+- interrupts      : Should be single bit error interrupt, then double bit error
+	interrupt, in this order.
+
 Example:
 
 	eccmgr: eccmgr@...06000 {
@@ -195,4 +203,12 @@ Example:
 			interrupts = <2 IRQ_TYPE_LEVEL_HIGH>,
 				     <34 IRQ_TYPE_LEVEL_HIGH>;
 		};
+
+		qspi-ecc@...c8400 {
+			compatible = "altr,socfpga-qspi-ecc";
+			reg = <0xff8c8400 0x400>;
+			altr,ecc-parent = <&qspi>;
+			interrupts = <14 IRQ_TYPE_LEVEL_HIGH>,
+				     <46 IRQ_TYPE_LEVEL_HIGH>;
+		};
 	};
-- 
1.7.9.5