| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1468574720-24296-6-git-send-email-alexandre.belloni@free-electrons.com>
Date: Fri, 15 Jul 2016 11:25:19 +0200
From: Alexandre Belloni <alexandre.belloni@...e-electrons.com>
To: Nicolas Ferre <nicolas.ferre@...el.com>
Cc: Arnd Bergmann <arnd@...db.de>,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
Alexandre Belloni <alexandre.belloni@...e-electrons.com>
Subject: [PATCH 6/7] ARM: dts: at91: sama5d3x: separate motherboard gmac and emac definitions
Separate the definitions for the emac and the gmac in different files and
include them in the final board dts that uses them.
Solves:
Warning (unit_address_vs_reg): Node /ahb/apb/ethernet@...28000 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /ahb/apb/ethernet@...2c000 has a unit name, but no reg property
Signed-off-by: Alexandre Belloni <alexandre.belloni@...e-electrons.com>
---
arch/arm/boot/dts/sama5d31ek.dts | 1 +
arch/arm/boot/dts/sama5d33ek.dts | 1 +
arch/arm/boot/dts/sama5d34ek.dts | 1 +
arch/arm/boot/dts/sama5d35ek.dts | 2 ++
arch/arm/boot/dts/sama5d36ek.dts | 2 ++
arch/arm/boot/dts/sama5d3xcm.dtsi | 34 ------------------------
arch/arm/boot/dts/sama5d3xmb.dtsi | 12 ---------
arch/arm/boot/dts/sama5d3xmb_emac.dtsi | 26 ++++++++++++++++++
arch/arm/boot/dts/sama5d3xmb_gmac.dtsi | 48 ++++++++++++++++++++++++++++++++++
9 files changed, 81 insertions(+), 46 deletions(-)
create mode 100644 arch/arm/boot/dts/sama5d3xmb_emac.dtsi
create mode 100644 arch/arm/boot/dts/sama5d3xmb_gmac.dtsi
diff --git a/arch/arm/boot/dts/sama5d31ek.dts b/arch/arm/boot/dts/sama5d31ek.dts
index 04eec0dfcf7d..25e4c0b2d786 100644
--- a/arch/arm/boot/dts/sama5d31ek.dts
+++ b/arch/arm/boot/dts/sama5d31ek.dts
@@ -9,6 +9,7 @@
/dts-v1/;
#include "sama5d31.dtsi"
#include "sama5d3xmb.dtsi"
+#include "sama5d3xmb_emac.dtsi"
#include "sama5d3xdm.dtsi"
/ {
diff --git a/arch/arm/boot/dts/sama5d33ek.dts b/arch/arm/boot/dts/sama5d33ek.dts
index cbd6a3ff1545..c517b87a1de2 100644
--- a/arch/arm/boot/dts/sama5d33ek.dts
+++ b/arch/arm/boot/dts/sama5d33ek.dts
@@ -9,6 +9,7 @@
/dts-v1/;
#include "sama5d33.dtsi"
#include "sama5d3xmb.dtsi"
+#include "sama5d3xmb_gmac.dtsi"
#include "sama5d3xdm.dtsi"
/ {
diff --git a/arch/arm/boot/dts/sama5d34ek.dts b/arch/arm/boot/dts/sama5d34ek.dts
index 878aa164275a..c8b8449fdc3e 100644
--- a/arch/arm/boot/dts/sama5d34ek.dts
+++ b/arch/arm/boot/dts/sama5d34ek.dts
@@ -9,6 +9,7 @@
/dts-v1/;
#include "sama5d34.dtsi"
#include "sama5d3xmb.dtsi"
+#include "sama5d3xmb_gmac.dtsi"
#include "sama5d3xdm.dtsi"
/ {
diff --git a/arch/arm/boot/dts/sama5d35ek.dts b/arch/arm/boot/dts/sama5d35ek.dts
index e812f5c1bf70..6e261fcf576c 100644
--- a/arch/arm/boot/dts/sama5d35ek.dts
+++ b/arch/arm/boot/dts/sama5d35ek.dts
@@ -9,6 +9,8 @@
/dts-v1/;
#include "sama5d35.dtsi"
#include "sama5d3xmb.dtsi"
+#include "sama5d3xmb_emac.dtsi"
+#include "sama5d3xmb_gmac.dtsi"
/ {
model = "Atmel SAMA5D35-EK";
diff --git a/arch/arm/boot/dts/sama5d36ek.dts b/arch/arm/boot/dts/sama5d36ek.dts
index 59576c6f9826..cd458b85a205 100644
--- a/arch/arm/boot/dts/sama5d36ek.dts
+++ b/arch/arm/boot/dts/sama5d36ek.dts
@@ -10,6 +10,8 @@
#include "sama5d36.dtsi"
#include "sama5d3xmb.dtsi"
#include "sama5d3xdm.dtsi"
+#include "sama5d3xmb_emac.dtsi"
+#include "sama5d3xmb_gmac.dtsi"
/ {
model = "Atmel SAMA5D36-EK";
diff --git a/arch/arm/boot/dts/sama5d3xcm.dtsi b/arch/arm/boot/dts/sama5d3xcm.dtsi
index 2cf9c3611db6..b5e111b29da1 100644
--- a/arch/arm/boot/dts/sama5d3xcm.dtsi
+++ b/arch/arm/boot/dts/sama5d3xcm.dtsi
@@ -34,40 +34,6 @@
spi0: spi@...04000 {
cs-gpios = <&pioD 13 0>, <0>, <0>, <0>;
};
-
- macb0: ethernet@...28000 {
- phy-mode = "rgmii";
- #address-cells = <1>;
- #size-cells = <0>;
-
- ethernet-phy@1 {
- reg = <0x1>;
- interrupt-parent = <&pioB>;
- interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
- txen-skew-ps = <800>;
- txc-skew-ps = <3000>;
- rxdv-skew-ps = <400>;
- rxc-skew-ps = <3000>;
- rxd0-skew-ps = <400>;
- rxd1-skew-ps = <400>;
- rxd2-skew-ps = <400>;
- rxd3-skew-ps = <400>;
- };
-
- ethernet-phy@7 {
- reg = <0x7>;
- interrupt-parent = <&pioB>;
- interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
- txen-skew-ps = <800>;
- txc-skew-ps = <3000>;
- rxdv-skew-ps = <400>;
- rxc-skew-ps = <3000>;
- rxd0-skew-ps = <400>;
- rxd1-skew-ps = <400>;
- rxd2-skew-ps = <400>;
- rxd3-skew-ps = <400>;
- };
- };
};
nand0: nand@...00000 {
diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi b/arch/arm/boot/dts/sama5d3xmb.dtsi
index 89010422812d..6d252ad050f6 100644
--- a/arch/arm/boot/dts/sama5d3xmb.dtsi
+++ b/arch/arm/boot/dts/sama5d3xmb.dtsi
@@ -117,18 +117,6 @@
status = "okay";
};
- macb1: ethernet@...2c000 {
- phy-mode = "rmii";
-
- #address-cells = <1>;
- #size-cells = <0>;
- phy0: ethernet-phy@1 {
- interrupt-parent = <&pioE>;
- interrupts = <30 IRQ_TYPE_EDGE_FALLING>;
- reg = <1>;
- };
- };
-
pinctrl@...ff200 {
board {
pinctrl_mmc0_cd: mmc0_cd {
diff --git a/arch/arm/boot/dts/sama5d3xmb_emac.dtsi b/arch/arm/boot/dts/sama5d3xmb_emac.dtsi
new file mode 100644
index 000000000000..2fd14f371a04
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d3xmb_emac.dtsi
@@ -0,0 +1,26 @@
+/*
+ * sama5d3xmb_emac.dts - Device Tree Include file for SAMA5D3x mother board
+ * Ethernet
+ *
+ * Copyright (C) 2016 Atmel,
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/ {
+ ahb {
+ apb {
+ macb1: ethernet@...2c000 {
+ phy-mode = "rmii";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy0: ethernet-phy@1 {
+ interrupt-parent = <&pioE>;
+ interrupts = <30 IRQ_TYPE_EDGE_FALLING>;
+ reg = <1>;
+ };
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/sama5d3xmb_gmac.dtsi b/arch/arm/boot/dts/sama5d3xmb_gmac.dtsi
new file mode 100644
index 000000000000..65aea7a75b1d
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d3xmb_gmac.dtsi
@@ -0,0 +1,48 @@
+/*
+ * sama5d3xmb_gmac.dtsi - Device Tree Include file for SAMA5D3x motherboard
+ * Gigabit Ethernet
+ *
+ * Copyright (C) 2016 Atmel,
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/ {
+ ahb {
+ apb {
+ macb0: ethernet@...28000 {
+ phy-mode = "rgmii";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet-phy@1 {
+ reg = <0x1>;
+ interrupt-parent = <&pioB>;
+ interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+ txen-skew-ps = <800>;
+ txc-skew-ps = <3000>;
+ rxdv-skew-ps = <400>;
+ rxc-skew-ps = <3000>;
+ rxd0-skew-ps = <400>;
+ rxd1-skew-ps = <400>;
+ rxd2-skew-ps = <400>;
+ rxd3-skew-ps = <400>;
+ };
+
+ ethernet-phy@7 {
+ reg = <0x7>;
+ interrupt-parent = <&pioB>;
+ interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+ txen-skew-ps = <800>;
+ txc-skew-ps = <3000>;
+ rxdv-skew-ps = <400>;
+ rxc-skew-ps = <3000>;
+ rxd0-skew-ps = <400>;
+ rxd1-skew-ps = <400>;
+ rxd2-skew-ps = <400>;
+ rxd3-skew-ps = <400>;
+ };
+ };
+ };
+ };
+};
--
2.8.1
Powered by blists - more mailing lists