| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20160715012750.GQ15995@brightrain.aerifal.cx>
Date: Thu, 14 Jul 2016 21:27:50 -0400
From: Rich Felker <dalias@...c.org>
To: linux-kernel@...r.kernel.org, linux-sh@...r.kernel.org
Cc: Jason Cooper <jason@...edaemon.net>,
Marc Zyngier <marc.zyngier@....com>,
Thomas Gleixner <tglx@...utronix.de>,
Daniel Lezcano <daniel.lezcano@...aro.org>
Subject: Re: [PATCH v3 08/12] irqchip: add J-Core AIC driver
On Wed, May 25, 2016 at 05:43:03AM +0000, Rich Felker wrote:
> There are two versions of the J-Core interrupt controller in use, aic1
> which generates interrupts with programmable priorities, but only
> supports 8 irq lines and maps them to cpu traps in the range 17 to 24,
> and aic2 which uses traps in the range 64-127 and supports up to 128
> irqs, with priorities dependent on the interrupt number. The Linux
> driver does not make use of priorities anyway.
>
> For simplicity, there is no aic1-specific logic in the driver beyond
> setting the priority register, which is necessary for interrupts to
> work at all. Eventually aic1 will likely be phased out, but it's
> currently in use in deployments and all released bitstream binaries.
Any comments on changes I should make in resubmitting this for the 4.8
merge window? I could somewhat restrict the possible irqs, but aic1
allows the pit to be programmed to generate any trap number you want,
despite the hard-wired interrupts being limited to the range 17-24.
It might make sense to do something to allow percpu irq requests, but
I couldn't figure out how to make them work and the current timer
driver (that needs per-cpu irq delivery) just requests its irq through
normal request_irq and lets the hardware do the right thing.
One possible change would be allowing non-identity mapping between
hardware irq numbers (cpu trap numbers) and virqs, but then some
facility for setting up a mapping/dispatch function in do_IRQ is
needed.
Since the driver (and aic device) currently depends to some extent on
SH arch trap numbers and how the SH irq entry point passes them on
(identity mapping), should this driver just go in arch/sh/drivers
rather than drivers/irqchip?
Rich
> Signed-off-by: Rich Felker <dalias@...c.org>
> ---
>
> This version fixes a missing "static" reported in the previous
> version of the patch. I missed Marc Zyngier's reply to the v2 when
> preparing the v3 patch series, but I'm still not sure exactly what, if
> any, changes should come out of that discussion, and they'll probably
> mostly in the area of comments or changelog.
>
> drivers/irqchip/Kconfig | 6 +++
> drivers/irqchip/Makefile | 1 +
> drivers/irqchip/irq-jcore-aic.c | 95 +++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 102 insertions(+)
> create mode 100644 drivers/irqchip/irq-jcore-aic.c
>
> diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
> index 3e12479..3cb37d6 100644
> --- a/drivers/irqchip/Kconfig
> +++ b/drivers/irqchip/Kconfig
> @@ -149,6 +149,12 @@ config PIC32_EVIC
> select GENERIC_IRQ_CHIP
> select IRQ_DOMAIN
>
> +config JCORE_AIC
> + bool "J-Core integrated AIC"
> + select IRQ_DOMAIN
> + help
> + Support for the J-Core integrated AIC.
> +
> config RENESAS_INTC_IRQPIN
> bool
> select IRQ_DOMAIN
> diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
> index b03cfcb..5a1f1bf 100644
> --- a/drivers/irqchip/Makefile
> +++ b/drivers/irqchip/Makefile
> @@ -37,6 +37,7 @@ obj-$(CONFIG_I8259) += irq-i8259.o
> obj-$(CONFIG_IMGPDC_IRQ) += irq-imgpdc.o
> obj-$(CONFIG_IRQ_MIPS_CPU) += irq-mips-cpu.o
> obj-$(CONFIG_SIRF_IRQ) += irq-sirfsoc.o
> +obj-$(CONFIG_JCORE_AIC) += irq-jcore-aic.o
> obj-$(CONFIG_RENESAS_INTC_IRQPIN) += irq-renesas-intc-irqpin.o
> obj-$(CONFIG_RENESAS_IRQC) += irq-renesas-irqc.o
> obj-$(CONFIG_VERSATILE_FPGA_IRQ) += irq-versatile-fpga.o
> diff --git a/drivers/irqchip/irq-jcore-aic.c b/drivers/irqchip/irq-jcore-aic.c
> new file mode 100644
> index 0000000..1348cdb
> --- /dev/null
> +++ b/drivers/irqchip/irq-jcore-aic.c
> @@ -0,0 +1,95 @@
> +/*
> + * J-Core SoC AIC driver
> + *
> + * Copyright (C) 2015-2016 Smart Energy Instruments, Inc.
> + *
> + * This file is subject to the terms and conditions of the GNU General Public
> + * License. See the file "COPYING" in the main directory of this archive
> + * for more details.
> + */
> +
> +#include <linux/irq.h>
> +#include <linux/io.h>
> +#include <linux/irqchip.h>
> +#include <linux/irqdomain.h>
> +#include <linux/module.h>
> +#include <linux/cpu.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>
> +
> +#define AIC1_INTPRI 8
> +
> +static struct aic_data {
> + unsigned char __iomem *base;
> + u32 cpu_offset;
> + struct irq_chip chip;
> + struct irq_domain *domain;
> + struct notifier_block nb;
> +} aic_data;
> +
> +static int aic_irqdomain_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hwirq)
> +{
> + struct aic_data *aic = d->host_data;
> +
> + irq_set_chip_data(irq, aic);
> + irq_set_chip_and_handler(irq, &aic->chip, handle_simple_irq);
> + irq_set_probe(irq);
> +
> + return 0;
> +}
> +
> +static const struct irq_domain_ops aic_irqdomain_ops = {
> + .map = aic_irqdomain_map,
> + .xlate = irq_domain_xlate_onecell,
> +};
> +
> +static void noop(struct irq_data *data)
> +{
> +}
> +
> +static void aic1_localenable(struct aic_data *aic)
> +{
> + unsigned cpu = smp_processor_id();
> + pr_info("Local AIC enable on cpu %u\n", cpu);
> + writel(0xffffffff, aic->base + cpu * aic->cpu_offset + AIC1_INTPRI);
> +}
> +
> +static int aic1_cpu_notify(struct notifier_block *self, unsigned long action, void *hcpu)
> +{
> + switch (action & ~CPU_TASKS_FROZEN) {
> + case CPU_STARTING:
> + aic1_localenable(container_of(self, struct aic_data, nb));
> + break;
> + }
> + return NOTIFY_OK;
> +}
> +
> +int __init aic_irq_of_init(struct device_node *node, struct device_node *parent)
> +{
> + struct aic_data *aic = &aic_data;
> +
> + aic->base = of_iomap(node, 0);
> + of_property_read_u32(node, "cpu-offset", &aic->cpu_offset);
> +
> + pr_info("Initializing J-Core AIC at %p\n", aic->base);
> +
> + if (of_device_is_compatible(node, "jcore,aic1")) {
> + /* For aic1, need to enabled zero-priority-by-default irqs */
> + aic->nb.notifier_call = aic1_cpu_notify;
> + register_cpu_notifier(&aic->nb);
> + aic1_localenable(aic);
> + }
> +
> + aic->chip.name = node->name;
> + aic->chip.irq_mask = noop;
> + aic->chip.irq_unmask = noop;
> +
> + aic->domain = irq_domain_add_linear(node, 128, &aic_irqdomain_ops, aic);
> + irq_create_strict_mappings(aic->domain, 16, 16, 112);
> +
> + return 0;
> +}
> +
> +IRQCHIP_DECLARE(jcore_aic2, "jcore,aic2", aic_irq_of_init);
> +IRQCHIP_DECLARE(jcore_aic1, "jcore,aic1", aic_irq_of_init);
> --
> 2.8.1
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists