Message-ID: <20160715131357.GA2893@seanpaul0.roam.corp.google.com>
Date:	Fri, 15 Jul 2016 09:13:57 -0400
From:	Sean Paul <seanpaul@...omium.org>
To:	Yakir Yang <ykk@...k-chips.com>
Cc:	Mark Yao <yzq@...k-chips.com>, Inki Dae <inki.dae@...sung.com>,
	Jingoo Han <jingoohan1@...il.com>,
	Heiko Stuebner <heiko@...ech.de>,
	Krzysztof Kozlowski <k.kozlowski@...sung.com>,
	linux-samsung-soc@...r.kernel.org, linux-kernel@...r.kernel.org,
	linux-rockchip@...ts.infradead.org, daniel.vetter@...ll.ch,
	emil.l.velikov@...il.com, dianders@...omium.org,
	dri-devel@...ts.freedesktop.org, Tomasz Figa <tfiga@...omium.org>,
	Javier Martinez Canillas <javier@....samsung.com>,
	Stéphane Marchesin <marcheu@...omium.org>,
	Thierry Reding <treding@...dia.com>,
	Dan Carpenter <dan.carpenter@...cle.com>
Subject: Re: [PATCH v4.1 3/4] drm/bridge: analogix_dp: add the PSR function
 support

On Fri, Jul 15, 2016 at 06:55:17PM +0800, Yakir Yang wrote:
> The full name of PSR is Panel Self Refresh, panel device could refresh
> itself with the hardware framebuffer in panel, this would make lots of
> sense to save the power consumption.
> 
> This patch have exported two symbols for platform driver to implement
> the PSR function in hardware side:
> - analogix_dp_active_psr()
> - analogix_dp_inactive_psr()
> 
> Signed-off-by: Yakir Yang <ykk@...k-chips.com>

Reviewed-by: Sean Paul <seanpaul@...omium.org>

> ---
> Changes in v4.1:
> - Take use of existing edp_psr_vsc struct to swap HBx and DBx setting. (Sean)
> - Remove PSR_VID_CRC_FLUSH setting analogix_dp_enable_psr_crc().
> - Add comment about PBx magic numbers. (Sean)
> 
> Changes in v4:
> - Downgrade the PSR version print message to debug level. (Sean)
> - Return 'void' instead of 'int' in analogix_dp_enable_sink_psr(). (Sean)
> - Delete the unused read dpcd operations in analogix_dp_enable_sink_psr(). (Sean)
> - Delete the arbitrary usleep_range in analogix_dp_enable_psr_crc. (Sean).
> - Clean up the hardcoded values in analogix_dp_send_psr_spd(). (Sean)
> - Rename "active/inactive" to "enable/disable". (Sean, Dominik)
> - Keep set the PSR_VID_CRC_FLUSH gate in analogix_dp_enable_psr_crc().
> 
> Changes in v3:
> - split analogix_dp_enable_psr(), make it more clearly
>     analogix_dp_detect_sink_psr()
>     analogix_dp_enable_sink_psr()
> - remove some nosie register setting comments
> 
> Changes in v2:
> - introduce in v2, splite the common Analogix DP changes out
> 
>  drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 81 ++++++++++++++++++++++
>  drivers/gpu/drm/bridge/analogix/analogix_dp_core.h |  5 ++
>  drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c  | 51 ++++++++++++++
>  drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h  | 34 +++++++++
>  include/drm/bridge/analogix_dp.h                   |  3 +
>  5 files changed, 174 insertions(+)
> 
> diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
> index 32715da..381b25e 100644
> --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
> +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
> @@ -97,6 +97,83 @@ static int analogix_dp_detect_hpd(struct analogix_dp_device *dp)
>  	return 0;
>  }
>  
> +int analogix_dp_enable_psr(struct device *dev)
> +{
> +	struct analogix_dp_device *dp = dev_get_drvdata(dev);
> +	struct edp_vsc_psr psr_vsc;
> +
> +	if (!dp->psr_support)
> +		return -EINVAL;
> +
> +	/* Prepare VSC packet as per EDP 1.4 spec, Table 6.9 */
> +	memset(&psr_vsc, 0, sizeof(psr_vsc));
> +	psr_vsc.sdp_header.HB0 = 0;
> +	psr_vsc.sdp_header.HB1 = 0x7;
> +	psr_vsc.sdp_header.HB2 = 0x2;
> +	psr_vsc.sdp_header.HB3 = 0x8;
> +
> +	psr_vsc.DB0 = 0;
> +	psr_vsc.DB1 = EDP_VSC_PSR_STATE_ACTIVE | EDP_VSC_PSR_CRC_VALUES_VALID;
> +
> +	analogix_dp_send_psr_spd(dp, &psr_vsc);
> +	return 0;
> +}
> +EXPORT_SYMBOL_GPL(analogix_dp_enable_psr);
> +
> +int analogix_dp_disable_psr(struct device *dev)
> +{
> +	struct analogix_dp_device *dp = dev_get_drvdata(dev);
> +	struct edp_vsc_psr psr_vsc;
> +
> +	if (!dp->psr_support)
> +		return -EINVAL;
> +
> +	/* Prepare VSC packet as per EDP 1.4 spec, Table 6.9 */
> +	memset(&psr_vsc, 0, sizeof(psr_vsc));
> +	psr_vsc.sdp_header.HB0 = 0;
> +	psr_vsc.sdp_header.HB1 = 0x7;
> +	psr_vsc.sdp_header.HB2 = 0x2;
> +	psr_vsc.sdp_header.HB3 = 0x8;
> +
> +	psr_vsc.DB0 = 0;
> +	psr_vsc.DB1 = 0;
> +
> +	analogix_dp_send_psr_spd(dp, &psr_vsc);
> +	return 0;
> +}
> +EXPORT_SYMBOL_GPL(analogix_dp_disable_psr);
> +
> +static bool analogix_dp_detect_sink_psr(struct analogix_dp_device *dp)
> +{
> +	unsigned char psr_version;
> +
> +	analogix_dp_read_byte_from_dpcd(dp, DP_PSR_SUPPORT, &psr_version);
> +	dev_dbg(dp->dev, "Panel PSR version : %x\n", psr_version);
> +
> +	return (psr_version & DP_PSR_IS_SUPPORTED) ? true : false;
> +}
> +
> +static void analogix_dp_enable_sink_psr(struct analogix_dp_device *dp)
> +{
> +	unsigned char psr_en;
> +
> +	/* Disable psr function */
> +	analogix_dp_read_byte_from_dpcd(dp, DP_PSR_EN_CFG, &psr_en);
> +	psr_en &= ~DP_PSR_ENABLE;
> +	analogix_dp_write_byte_to_dpcd(dp, DP_PSR_EN_CFG, psr_en);
> +
> +	/* Main-Link transmitter remains active during PSR active states */
> +	psr_en = DP_PSR_MAIN_LINK_ACTIVE | DP_PSR_CRC_VERIFICATION;
> +	analogix_dp_write_byte_to_dpcd(dp, DP_PSR_EN_CFG, psr_en);
> +
> +	/* Enable psr function */
> +	psr_en = DP_PSR_ENABLE | DP_PSR_MAIN_LINK_ACTIVE |
> +		 DP_PSR_CRC_VERIFICATION;
> +	analogix_dp_write_byte_to_dpcd(dp, DP_PSR_EN_CFG, psr_en);
> +
> +	analogix_dp_enable_psr_crc(dp);
> +}
> +
>  static unsigned char analogix_dp_calc_edid_check_sum(unsigned char *edid_data)
>  {
>  	int i;
> @@ -921,6 +998,10 @@ static void analogix_dp_commit(struct analogix_dp_device *dp)
>  
>  	/* Enable video */
>  	analogix_dp_start_video(dp);
> +
> +	dp->psr_support = analogix_dp_detect_sink_psr(dp);
> +	if (dp->psr_support)
> +		analogix_dp_enable_sink_psr(dp);
>  }
>  
>  int analogix_dp_get_modes(struct drm_connector *connector)
> diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
> index b456380..17fbcee 100644
> --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
> +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
> @@ -177,6 +177,7 @@ struct analogix_dp_device {
>  	int			hpd_gpio;
>  	bool                    force_hpd;
>  	unsigned char           edid[EDID_BLOCK_LENGTH * 2];
> +	bool			psr_support;
>  
>  	struct analogix_dp_plat_data *plat_data;
>  };
> @@ -278,4 +279,8 @@ int analogix_dp_is_video_stream_on(struct analogix_dp_device *dp);
>  void analogix_dp_config_video_slave_mode(struct analogix_dp_device *dp);
>  void analogix_dp_enable_scrambling(struct analogix_dp_device *dp);
>  void analogix_dp_disable_scrambling(struct analogix_dp_device *dp);
> +void analogix_dp_enable_psr_crc(struct analogix_dp_device *dp);
> +void analogix_dp_send_psr_spd(struct analogix_dp_device *dp,
> +			      struct edp_vsc_psr *vsc);
> +
>  #endif /* _ANALOGIX_DP_CORE_H */
> diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
> index 48030f0..52c1b6b 100644
> --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
> +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
> @@ -1322,3 +1322,54 @@ void analogix_dp_disable_scrambling(struct analogix_dp_device *dp)
>  	reg |= SCRAMBLING_DISABLE;
>  	writel(reg, dp->reg_base + ANALOGIX_DP_TRAINING_PTN_SET);
>  }
> +
> +void analogix_dp_enable_psr_crc(struct analogix_dp_device *dp)
> +{
> +	writel(PSR_VID_CRC_ENABLE, dp->reg_base + ANALOGIX_DP_CRC_CON);
> +}
> +
> +void analogix_dp_send_psr_spd(struct analogix_dp_device *dp,
> +			      struct edp_vsc_psr *vsc)
> +{
> +	unsigned int val;
> +
> +	/* don't send info frame */
> +	val = readl(dp->reg_base + ANALOGIX_DP_PKT_SEND_CTL);
> +	val &= ~IF_EN;
> +	writel(val, dp->reg_base + ANALOGIX_DP_PKT_SEND_CTL);
> +
> +	/* configure single frame update mode */
> +	writel(PSR_FRAME_UP_TYPE_BURST | PSR_CRC_SEL_HARDWARE,
> +	       dp->reg_base + ANALOGIX_DP_PSR_FRAME_UPDATE_CTRL);
> +
> +	/* configure VSC HB0~HB3 */
> +	writel(vsc->sdp_header.HB0, dp->reg_base + ANALOGIX_DP_SPD_HB0);
> +	writel(vsc->sdp_header.HB1, dp->reg_base + ANALOGIX_DP_SPD_HB1);
> +	writel(vsc->sdp_header.HB2, dp->reg_base + ANALOGIX_DP_SPD_HB2);
> +	writel(vsc->sdp_header.HB3, dp->reg_base + ANALOGIX_DP_SPD_HB3);
> +
> +	/* configure reused VSC PB0~PB3, magic number from vendor */
> +	writel(0x00, dp->reg_base + ANALOGIX_DP_SPD_PB0);
> +	writel(0x16, dp->reg_base + ANALOGIX_DP_SPD_PB1);
> +	writel(0xCE, dp->reg_base + ANALOGIX_DP_SPD_PB2);
> +	writel(0x5D, dp->reg_base + ANALOGIX_DP_SPD_PB3);
> +
> +	/* configure DB0 / DB1 values */
> +	writel(vsc->DB0, dp->reg_base + ANALOGIX_DP_VSC_SHADOW_DB0);
> +	writel(vsc->DB1, dp->reg_base + ANALOGIX_DP_VSC_SHADOW_DB1);
> +
> +	/* set reuse spd inforframe */
> +	val = readl(dp->reg_base + ANALOGIX_DP_VIDEO_CTL_3);
> +	val |= REUSE_SPD_EN;
> +	writel(val, dp->reg_base + ANALOGIX_DP_VIDEO_CTL_3);
> +
> +	/* mark info frame update */
> +	val = readl(dp->reg_base + ANALOGIX_DP_PKT_SEND_CTL);
> +	val = (val | IF_UP) & ~IF_EN;
> +	writel(val, dp->reg_base + ANALOGIX_DP_PKT_SEND_CTL);
> +
> +	/* send info frame */
> +	val = readl(dp->reg_base + ANALOGIX_DP_PKT_SEND_CTL);
> +	val |= IF_EN;
> +	writel(val, dp->reg_base + ANALOGIX_DP_PKT_SEND_CTL);
> +}
> diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h
> index cdcc6c5..40200c6 100644
> --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h
> +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h
> @@ -22,6 +22,8 @@
>  #define ANALOGIX_DP_VIDEO_CTL_8			0x3C
>  #define ANALOGIX_DP_VIDEO_CTL_10		0x44
>  
> +#define ANALOGIX_DP_SPDIF_AUDIO_CTL_0		0xD8
> +
>  #define ANALOGIX_DP_PLL_REG_1			0xfc
>  #define ANALOGIX_DP_PLL_REG_2			0x9e4
>  #define ANALOGIX_DP_PLL_REG_3			0x9e8
> @@ -30,6 +32,21 @@
>  
>  #define ANALOGIX_DP_PD				0x12c
>  
> +#define ANALOGIX_DP_IF_TYPE			0x244
> +#define ANALOGIX_DP_IF_PKT_DB1			0x254
> +#define ANALOGIX_DP_IF_PKT_DB2			0x258
> +#define ANALOGIX_DP_SPD_HB0			0x2F8
> +#define ANALOGIX_DP_SPD_HB1			0x2FC
> +#define ANALOGIX_DP_SPD_HB2			0x300
> +#define ANALOGIX_DP_SPD_HB3			0x304
> +#define ANALOGIX_DP_SPD_PB0			0x308
> +#define ANALOGIX_DP_SPD_PB1			0x30C
> +#define ANALOGIX_DP_SPD_PB2			0x310
> +#define ANALOGIX_DP_SPD_PB3			0x314
> +#define ANALOGIX_DP_PSR_FRAME_UPDATE_CTRL	0x318
> +#define ANALOGIX_DP_VSC_SHADOW_DB0		0x31C
> +#define ANALOGIX_DP_VSC_SHADOW_DB1		0x320
> +
>  #define ANALOGIX_DP_LANE_MAP			0x35C
>  
>  #define ANALOGIX_DP_ANALOG_CTL_1		0x370
> @@ -103,6 +120,8 @@
>  
>  #define ANALOGIX_DP_SOC_GENERAL_CTL		0x800
>  
> +#define ANALOGIX_DP_CRC_CON			0x890
> +
>  /* ANALOGIX_DP_TX_SW_RESET */
>  #define RESET_DP_TX				(0x1 << 0)
>  
> @@ -151,6 +170,7 @@
>  #define VID_CHK_UPDATE_TYPE_SHIFT		(4)
>  #define VID_CHK_UPDATE_TYPE_1			(0x1 << 4)
>  #define VID_CHK_UPDATE_TYPE_0			(0x0 << 4)
> +#define REUSE_SPD_EN				(0x1 << 3)
>  
>  /* ANALOGIX_DP_VIDEO_CTL_8 */
>  #define VID_HRES_TH(x)				(((x) & 0xf) << 4)
> @@ -167,6 +187,12 @@
>  #define REF_CLK_27M				(0x0 << 0)
>  #define REF_CLK_MASK				(0x1 << 0)
>  
> +/* ANALOGIX_DP_PSR_FRAME_UPDATE_CTRL */
> +#define PSR_FRAME_UP_TYPE_BURST			(0x1 << 0)
> +#define PSR_FRAME_UP_TYPE_SINGLE		(0x0 << 0)
> +#define PSR_CRC_SEL_HARDWARE			(0x1 << 1)
> +#define PSR_CRC_SEL_MANUALLY			(0x0 << 1)
> +
>  /* ANALOGIX_DP_LANE_MAP */
>  #define LANE3_MAP_LOGIC_LANE_0			(0x0 << 6)
>  #define LANE3_MAP_LOGIC_LANE_1			(0x1 << 6)
> @@ -376,4 +402,12 @@
>  #define VIDEO_MODE_SLAVE_MODE			(0x1 << 0)
>  #define VIDEO_MODE_MASTER_MODE			(0x0 << 0)
>  
> +/* ANALOGIX_DP_PKT_SEND_CTL */
> +#define IF_UP					(0x1 << 4)
> +#define IF_EN					(0x1 << 0)
> +
> +/* ANALOGIX_DP_CRC_CON */
> +#define PSR_VID_CRC_FLUSH			(0x1 << 2)
> +#define PSR_VID_CRC_ENABLE			(0x1 << 0)
> +
>  #endif /* _ANALOGIX_DP_REG_H */
> diff --git a/include/drm/bridge/analogix_dp.h b/include/drm/bridge/analogix_dp.h
> index 261b86d..9cd8838 100644
> --- a/include/drm/bridge/analogix_dp.h
> +++ b/include/drm/bridge/analogix_dp.h
> @@ -38,6 +38,9 @@ struct analogix_dp_plat_data {
>  			 struct drm_connector *);
>  };
>  
> +int analogix_dp_enable_psr(struct device *dev);
> +int analogix_dp_disable_psr(struct device *dev);
> +
>  int analogix_dp_resume(struct device *dev);
>  int analogix_dp_suspend(struct device *dev);
>  
> -- 
> 1.9.1
> 
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel@...ts.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel

Powered by blists - more mailing lists