[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1468843741-59637-2-git-send-email-john@phrozen.org>
Date: Mon, 18 Jul 2016 14:09:01 +0200
From: John Crispin <john@...ozen.org>
To: Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>
Cc: linux-kernel@...r.kernel.org, linux-mediatek@...ts.infradead.org,
linux-arm-kernel@...ts.infradead.org,
Chen Zhong <chen.zhong@...iatek.com>,
John Crispin <blogic@...nwrt.org>
Subject: [PATCH V9 2/2] regulator: mt6323: Add support for MT6323 regulator
From: Chen Zhong <chen.zhong@...iatek.com>
The MT6323 is a regulator found on boards based on MediaTek MT7623 and
probably other SoCs. It is a so called pmic and connects as a slave to
SoC using SPI, wrapped inside the pmic-wrapper.
Signed-off-by: Chen Zhong <chen.zhong@...iatek.com>
Signed-off-by: John Crispin <blogic@...nwrt.org>
---
This series was dropped from the v4.7 queue to avoid a merge conflict with
the series adding mt6323 support to the MFD driver. These patches were
merged during the v4.7 window, so this series is good to go for v4.8. The
relevant started with
commit feec4799ac4d ("mfd: mt6397: int_con and int_status may vary ...")
through to
commit 44760cf3bf0a ("mfd: mt6397: Add MT6323 support to MT6397 driver")
Changes in V9
* drop compatible string from devicetree
Changes in V6
* add back the set/get mode callbacks
Changes in V5
* remove the code that modifies constraints
* remove the code allows mode changes
Changes in V4:
* add id_table and of_match_table
* use short GPL text
* change MODULE_LICENSE to GPL V2
Changes in V2:
* send to the the proper maintainer
drivers/regulator/Kconfig | 9 +
drivers/regulator/Makefile | 1 +
drivers/regulator/mt6323-regulator.c | 432 ++++++++++++++++++++++++++++
include/linux/regulator/mt6323-regulator.h | 52 ++++
4 files changed, 494 insertions(+)
create mode 100644 drivers/regulator/mt6323-regulator.c
create mode 100644 include/linux/regulator/mt6323-regulator.h
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index ae9cbd6..6c88e31 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -498,6 +498,15 @@ config REGULATOR_MT6311
This driver supports the control of different power rails of device
through regulator interface.
+config REGULATOR_MT6323
+ tristate "MediaTek MT6323 PMIC"
+ depends on MFD_MT6397
+ help
+ Say y here to select this option to enable the power regulator of
+ MediaTek MT6323 PMIC.
+ This driver supports the control of different power rails of device
+ through regulator interface.
+
config REGULATOR_MT6397
tristate "MediaTek MT6397 PMIC"
depends on MFD_MT6397
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 85a1d44..f3da9ee 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -65,6 +65,7 @@ obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o
obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o
obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o
obj-$(CONFIG_REGULATOR_MT6311) += mt6311-regulator.o
+obj-$(CONFIG_REGULATOR_MT6323) += mt6323-regulator.o
obj-$(CONFIG_REGULATOR_MT6397) += mt6397-regulator.o
obj-$(CONFIG_REGULATOR_QCOM_RPM) += qcom_rpm-regulator.o
obj-$(CONFIG_REGULATOR_QCOM_SMD_RPM) += qcom_smd-regulator.o
diff --git a/drivers/regulator/mt6323-regulator.c b/drivers/regulator/mt6323-regulator.c
new file mode 100644
index 0000000..28ebbda
--- /dev/null
+++ b/drivers/regulator/mt6323-regulator.c
@@ -0,0 +1,432 @@
+/*
+ * Copyright (c) 2016 MediaTek Inc.
+ * Author: Chen Zhong <chen.zhong@...iatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/mfd/mt6397/core.h>
+#include <linux/mfd/mt6323/registers.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/mt6323-regulator.h>
+#include <linux/regulator/of_regulator.h>
+
+#define MT6323_LDO_MODE_NORMAL 0
+#define MT6323_LDO_MODE_LP 1
+
+/*
+ * MT6323 regulators' information
+ *
+ * @desc: standard fields of regulator description.
+ * @qi: Mask for query enable signal status of regulators
+ * @vselon_reg: Register sections for hardware control mode of bucks
+ * @vselctrl_reg: Register for controlling the buck control mode.
+ * @vselctrl_mask: Mask for query buck's voltage control mode.
+ */
+struct mt6323_regulator_info {
+ struct regulator_desc desc;
+ u32 qi;
+ u32 vselon_reg;
+ u32 vselctrl_reg;
+ u32 vselctrl_mask;
+ u32 modeset_reg;
+ u32 modeset_mask;
+};
+
+#define MT6323_BUCK(match, vreg, min, max, step, volt_ranges, enreg, \
+ vosel, vosel_mask, voselon, vosel_ctrl) \
+[MT6323_ID_##vreg] = { \
+ .desc = { \
+ .name = #vreg, \
+ .of_match = of_match_ptr(match), \
+ .ops = &mt6323_volt_range_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .id = MT6323_ID_##vreg, \
+ .owner = THIS_MODULE, \
+ .n_voltages = (max - min)/step + 1, \
+ .linear_ranges = volt_ranges, \
+ .n_linear_ranges = ARRAY_SIZE(volt_ranges), \
+ .vsel_reg = vosel, \
+ .vsel_mask = vosel_mask, \
+ .enable_reg = enreg, \
+ .enable_mask = BIT(0), \
+ }, \
+ .qi = BIT(13), \
+ .vselon_reg = voselon, \
+ .vselctrl_reg = vosel_ctrl, \
+ .vselctrl_mask = BIT(1), \
+}
+
+#define MT6323_LDO(match, vreg, ldo_volt_table, enreg, enbit, vosel, \
+ vosel_mask, _modeset_reg, _modeset_mask) \
+[MT6323_ID_##vreg] = { \
+ .desc = { \
+ .name = #vreg, \
+ .of_match = of_match_ptr(match), \
+ .ops = &mt6323_volt_table_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .id = MT6323_ID_##vreg, \
+ .owner = THIS_MODULE, \
+ .n_voltages = ARRAY_SIZE(ldo_volt_table), \
+ .volt_table = ldo_volt_table, \
+ .vsel_reg = vosel, \
+ .vsel_mask = vosel_mask, \
+ .enable_reg = enreg, \
+ .enable_mask = BIT(enbit), \
+ }, \
+ .qi = BIT(15), \
+ .modeset_reg = _modeset_reg, \
+ .modeset_mask = _modeset_mask, \
+}
+
+#define MT6323_REG_FIXED(match, vreg, enreg, enbit, volt, \
+ _modeset_reg, _modeset_mask) \
+[MT6323_ID_##vreg] = { \
+ .desc = { \
+ .name = #vreg, \
+ .of_match = of_match_ptr(match), \
+ .ops = &mt6323_volt_fixed_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .id = MT6323_ID_##vreg, \
+ .owner = THIS_MODULE, \
+ .n_voltages = 1, \
+ .enable_reg = enreg, \
+ .enable_mask = BIT(enbit), \
+ .min_uV = volt, \
+ }, \
+ .qi = BIT(15), \
+ .modeset_reg = _modeset_reg, \
+ .modeset_mask = _modeset_mask, \
+}
+
+static const struct regulator_linear_range buck_volt_range1[] = {
+ REGULATOR_LINEAR_RANGE(700000, 0, 0x7f, 6250),
+};
+
+static const struct regulator_linear_range buck_volt_range2[] = {
+ REGULATOR_LINEAR_RANGE(1400000, 0, 0x7f, 12500),
+};
+
+static const struct regulator_linear_range buck_volt_range3[] = {
+ REGULATOR_LINEAR_RANGE(500000, 0, 0x3f, 50000),
+};
+
+static const u32 ldo_volt_table1[] = {
+ 3300000, 3400000, 3500000, 3600000,
+};
+
+static const u32 ldo_volt_table2[] = {
+ 1500000, 1800000, 2500000, 2800000,
+};
+
+static const u32 ldo_volt_table3[] = {
+ 1800000, 3300000,
+};
+
+static const u32 ldo_volt_table4[] = {
+ 3000000, 3300000,
+};
+
+static const u32 ldo_volt_table5[] = {
+ 1200000, 1300000, 1500000, 1800000, 2000000, 2800000, 3000000, 3300000,
+};
+
+static const u32 ldo_volt_table6[] = {
+ 1200000, 1300000, 1500000, 1800000, 2500000, 2800000, 3000000, 2000000,
+};
+
+static const u32 ldo_volt_table7[] = {
+ 1200000, 1300000, 1500000, 1800000,
+};
+
+static const u32 ldo_volt_table8[] = {
+ 1800000, 3000000,
+};
+
+static const u32 ldo_volt_table9[] = {
+ 1200000, 1350000, 1500000, 1800000,
+};
+
+static const u32 ldo_volt_table10[] = {
+ 1200000, 1300000, 1500000, 1800000,
+};
+
+static int mt6323_get_status(struct regulator_dev *rdev)
+{
+ int ret;
+ u32 regval;
+ struct mt6323_regulator_info *info = rdev_get_drvdata(rdev);
+
+ ret = regmap_read(rdev->regmap, info->desc.enable_reg, ®val);
+ if (ret != 0) {
+ dev_err(&rdev->dev, "Failed to get enable reg: %d\n", ret);
+ return ret;
+ }
+
+ return (regval & info->qi) ? REGULATOR_STATUS_ON : REGULATOR_STATUS_OFF;
+}
+
+static int mt6323_ldo_set_mode(struct regulator_dev *rdev, unsigned int mode)
+{
+ int ret, val = 0;
+ struct mt6323_regulator_info *info = rdev_get_drvdata(rdev);
+
+ if (!info->modeset_mask) {
+ dev_err(&rdev->dev, "regulator %s doesn't support set_mode\n",
+ info->desc.name);
+ return -EINVAL;
+ }
+
+ switch (mode) {
+ case REGULATOR_MODE_STANDBY:
+ val = MT6323_LDO_MODE_LP;
+ break;
+ case REGULATOR_MODE_NORMAL:
+ val = MT6323_LDO_MODE_NORMAL;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ val <<= ffs(info->modeset_mask) - 1;
+
+ ret = regmap_update_bits(rdev->regmap, info->modeset_reg,
+ info->modeset_mask, val);
+
+ return ret;
+}
+
+static unsigned int mt6323_ldo_get_mode(struct regulator_dev *rdev)
+{
+ unsigned int val;
+ unsigned int mode;
+ int ret;
+ struct mt6323_regulator_info *info = rdev_get_drvdata(rdev);
+
+ if (!info->modeset_mask) {
+ dev_err(&rdev->dev, "regulator %s doesn't support get_mode\n",
+ info->desc.name);
+ return -EINVAL;
+ }
+
+ ret = regmap_read(rdev->regmap, info->modeset_reg, &val);
+ if (ret < 0)
+ return ret;
+
+ val &= info->modeset_mask;
+ val >>= ffs(info->modeset_mask) - 1;
+
+ if (val & 0x1)
+ mode = REGULATOR_MODE_STANDBY;
+ else
+ mode = REGULATOR_MODE_NORMAL;
+
+ return mode;
+}
+
+static struct regulator_ops mt6323_volt_range_ops = {
+ .list_voltage = regulator_list_voltage_linear_range,
+ .map_voltage = regulator_map_voltage_linear_range,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_time_sel = regulator_set_voltage_time_sel,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .get_status = mt6323_get_status,
+};
+
+static struct regulator_ops mt6323_volt_table_ops = {
+ .list_voltage = regulator_list_voltage_table,
+ .map_voltage = regulator_map_voltage_iterate,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_time_sel = regulator_set_voltage_time_sel,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .get_status = mt6323_get_status,
+ .set_mode = mt6323_ldo_set_mode,
+ .get_mode = mt6323_ldo_get_mode,
+};
+
+static struct regulator_ops mt6323_volt_fixed_ops = {
+ .list_voltage = regulator_list_voltage_linear,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .get_status = mt6323_get_status,
+ .set_mode = mt6323_ldo_set_mode,
+ .get_mode = mt6323_ldo_get_mode,
+};
+
+/* The array is indexed by id(MT6323_ID_XXX) */
+static struct mt6323_regulator_info mt6323_regulators[] = {
+ MT6323_BUCK("buck_vproc", VPROC, 700000, 1493750, 6250,
+ buck_volt_range1, MT6323_VPROC_CON7, MT6323_VPROC_CON9, 0x7f,
+ MT6323_VPROC_CON10, MT6323_VPROC_CON5),
+ MT6323_BUCK("buck_vsys", VSYS, 1400000, 2987500, 12500,
+ buck_volt_range2, MT6323_VSYS_CON7, MT6323_VSYS_CON9, 0x7f,
+ MT6323_VSYS_CON10, MT6323_VSYS_CON5),
+ MT6323_BUCK("buck_vpa", VPA, 500000, 3650000, 50000,
+ buck_volt_range3, MT6323_VPA_CON7, MT6323_VPA_CON9,
+ 0x3f, MT6323_VPA_CON10, MT6323_VPA_CON5),
+ MT6323_REG_FIXED("ldo_vtcxo", VTCXO, MT6323_ANALDO_CON1, 10, 2800000,
+ MT6323_ANALDO_CON1, 0x2),
+ MT6323_REG_FIXED("ldo_vcn28", VCN28, MT6323_ANALDO_CON19, 12, 2800000,
+ MT6323_ANALDO_CON20, 0x2),
+ MT6323_LDO("ldo_vcn33_bt", VCN33_BT, ldo_volt_table1,
+ MT6323_ANALDO_CON16, 7, MT6323_ANALDO_CON16, 0xC,
+ MT6323_ANALDO_CON21, 0x2),
+ MT6323_LDO("ldo_vcn33_wifi", VCN33_WIFI, ldo_volt_table1,
+ MT6323_ANALDO_CON17, 12, MT6323_ANALDO_CON16, 0xC,
+ MT6323_ANALDO_CON21, 0x2),
+ MT6323_REG_FIXED("ldo_va", VA, MT6323_ANALDO_CON2, 14, 2800000,
+ MT6323_ANALDO_CON2, 0x2),
+ MT6323_LDO("ldo_vcama", VCAMA, ldo_volt_table2,
+ MT6323_ANALDO_CON4, 15, MT6323_ANALDO_CON10, 0x60, -1, 0),
+ MT6323_REG_FIXED("ldo_vio28", VIO28, MT6323_DIGLDO_CON0, 14, 2800000,
+ MT6323_DIGLDO_CON0, 0x2),
+ MT6323_REG_FIXED("ldo_vusb", VUSB, MT6323_DIGLDO_CON2, 14, 3300000,
+ MT6323_DIGLDO_CON2, 0x2),
+ MT6323_LDO("ldo_vmc", VMC, ldo_volt_table3,
+ MT6323_DIGLDO_CON3, 12, MT6323_DIGLDO_CON24, 0x10,
+ MT6323_DIGLDO_CON3, 0x2),
+ MT6323_LDO("ldo_vmch", VMCH, ldo_volt_table4,
+ MT6323_DIGLDO_CON5, 14, MT6323_DIGLDO_CON26, 0x80,
+ MT6323_DIGLDO_CON5, 0x2),
+ MT6323_LDO("ldo_vemc3v3", VEMC3V3, ldo_volt_table4,
+ MT6323_DIGLDO_CON6, 14, MT6323_DIGLDO_CON27, 0x80,
+ MT6323_DIGLDO_CON6, 0x2),
+ MT6323_LDO("ldo_vgp1", VGP1, ldo_volt_table5,
+ MT6323_DIGLDO_CON7, 15, MT6323_DIGLDO_CON28, 0xE0,
+ MT6323_DIGLDO_CON7, 0x2),
+ MT6323_LDO("ldo_vgp2", VGP2, ldo_volt_table6,
+ MT6323_DIGLDO_CON8, 15, MT6323_DIGLDO_CON29, 0xE0,
+ MT6323_DIGLDO_CON8, 0x2),
+ MT6323_LDO("ldo_vgp3", VGP3, ldo_volt_table7,
+ MT6323_DIGLDO_CON9, 15, MT6323_DIGLDO_CON30, 0x60,
+ MT6323_DIGLDO_CON9, 0x2),
+ MT6323_REG_FIXED("ldo_vcn18", VCN18, MT6323_DIGLDO_CON11, 14, 1800000,
+ MT6323_DIGLDO_CON11, 0x2),
+ MT6323_LDO("ldo_vsim1", VSIM1, ldo_volt_table8,
+ MT6323_DIGLDO_CON13, 15, MT6323_DIGLDO_CON34, 0x20,
+ MT6323_DIGLDO_CON13, 0x2),
+ MT6323_LDO("ldo_vsim2", VSIM2, ldo_volt_table8,
+ MT6323_DIGLDO_CON14, 15, MT6323_DIGLDO_CON35, 0x20,
+ MT6323_DIGLDO_CON14, 0x2),
+ MT6323_REG_FIXED("ldo_vrtc", VRTC, MT6323_DIGLDO_CON15, 8, 2800000,
+ -1, 0),
+ MT6323_LDO("ldo_vcamaf", VCAMAF, ldo_volt_table5,
+ MT6323_DIGLDO_CON31, 15, MT6323_DIGLDO_CON32, 0xE0,
+ MT6323_DIGLDO_CON31, 0x2),
+ MT6323_LDO("ldo_vibr", VIBR, ldo_volt_table5,
+ MT6323_DIGLDO_CON39, 15, MT6323_DIGLDO_CON40, 0xE0,
+ MT6323_DIGLDO_CON39, 0x2),
+ MT6323_REG_FIXED("ldo_vrf18", VRF18, MT6323_DIGLDO_CON45, 15, 1825000,
+ MT6323_DIGLDO_CON45, 0x2),
+ MT6323_LDO("ldo_vm", VM, ldo_volt_table9,
+ MT6323_DIGLDO_CON47, 14, MT6323_DIGLDO_CON48, 0x30,
+ MT6323_DIGLDO_CON47, 0x2),
+ MT6323_REG_FIXED("ldo_vio18", VIO18, MT6323_DIGLDO_CON49, 14, 1800000,
+ MT6323_DIGLDO_CON49, 0x2),
+ MT6323_LDO("ldo_vcamd", VCAMD, ldo_volt_table10,
+ MT6323_DIGLDO_CON51, 14, MT6323_DIGLDO_CON52, 0x60,
+ MT6323_DIGLDO_CON51, 0x2),
+ MT6323_REG_FIXED("ldo_vcamio", VCAMIO, MT6323_DIGLDO_CON53, 14, 1800000,
+ MT6323_DIGLDO_CON53, 0x2),
+};
+
+static int mt6323_set_buck_vosel_reg(struct platform_device *pdev)
+{
+ struct mt6397_chip *mt6323 = dev_get_drvdata(pdev->dev.parent);
+ int i;
+ u32 regval;
+
+ for (i = 0; i < MT6323_MAX_REGULATOR; i++) {
+ if (mt6323_regulators[i].vselctrl_reg) {
+ if (regmap_read(mt6323->regmap,
+ mt6323_regulators[i].vselctrl_reg,
+ ®val) < 0) {
+ dev_err(&pdev->dev,
+ "Failed to read buck ctrl\n");
+ return -EIO;
+ }
+
+ if (regval & mt6323_regulators[i].vselctrl_mask) {
+ mt6323_regulators[i].desc.vsel_reg =
+ mt6323_regulators[i].vselon_reg;
+ }
+ }
+ }
+
+ return 0;
+}
+
+static int mt6323_regulator_probe(struct platform_device *pdev)
+{
+ struct mt6397_chip *mt6323 = dev_get_drvdata(pdev->dev.parent);
+ struct regulator_config config = {};
+ struct regulator_dev *rdev;
+ int i;
+ u32 reg_value;
+
+ /* Query buck controller to select activated voltage register part */
+ if (mt6323_set_buck_vosel_reg(pdev))
+ return -EIO;
+
+ /* Read PMIC chip revision to update constraints and voltage table */
+ if (regmap_read(mt6323->regmap, MT6323_CID, ®_value) < 0) {
+ dev_err(&pdev->dev, "Failed to read Chip ID\n");
+ return -EIO;
+ }
+ dev_info(&pdev->dev, "Chip ID = 0x%x\n", reg_value);
+
+ for (i = 0; i < MT6323_MAX_REGULATOR; i++) {
+ config.dev = &pdev->dev;
+ config.driver_data = &mt6323_regulators[i];
+ config.regmap = mt6323->regmap;
+ rdev = devm_regulator_register(&pdev->dev,
+ &mt6323_regulators[i].desc, &config);
+ if (IS_ERR(rdev)) {
+ dev_err(&pdev->dev, "failed to register %s\n",
+ mt6323_regulators[i].desc.name);
+ return PTR_ERR(rdev);
+ }
+ }
+ return 0;
+}
+
+static const struct platform_device_id mt6323_platform_ids[] = {
+ {"mt6323-regulator", 0},
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(platform, mt6323_platform_ids);
+
+static const struct of_device_id mt6323_of_match[] = {
+ { .compatible = "mediatek,mt6323-regulator", },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, mt6323_of_match);
+
+static struct platform_driver mt6323_regulator_driver = {
+ .driver = {
+ .name = "mt6323-regulator",
+ .of_match_table = of_match_ptr(mt6323_of_match),
+ },
+ .probe = mt6323_regulator_probe,
+ .id_table = mt6323_platform_ids,
+};
+
+module_platform_driver(mt6323_regulator_driver);
+
+MODULE_AUTHOR("Chen Zhong <chen.zhong@...iatek.com>");
+MODULE_DESCRIPTION("Regulator Driver for MediaTek MT6397 PMIC");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/regulator/mt6323-regulator.h b/include/linux/regulator/mt6323-regulator.h
new file mode 100644
index 0000000..67011cd
--- /dev/null
+++ b/include/linux/regulator/mt6323-regulator.h
@@ -0,0 +1,52 @@
+/*
+ * Copyright (c) 2016 MediaTek Inc.
+ * Author: Chen Zhong <chen.zhong@...iatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __LINUX_REGULATOR_MT6323_H
+#define __LINUX_REGULATOR_MT6323_H
+
+enum {
+ MT6323_ID_VPROC = 0,
+ MT6323_ID_VSYS,
+ MT6323_ID_VPA,
+ MT6323_ID_VTCXO,
+ MT6323_ID_VCN28,
+ MT6323_ID_VCN33_BT,
+ MT6323_ID_VCN33_WIFI,
+ MT6323_ID_VA,
+ MT6323_ID_VCAMA,
+ MT6323_ID_VIO28 = 9,
+ MT6323_ID_VUSB,
+ MT6323_ID_VMC,
+ MT6323_ID_VMCH,
+ MT6323_ID_VEMC3V3,
+ MT6323_ID_VGP1,
+ MT6323_ID_VGP2,
+ MT6323_ID_VGP3,
+ MT6323_ID_VCN18,
+ MT6323_ID_VSIM1,
+ MT6323_ID_VSIM2,
+ MT6323_ID_VRTC,
+ MT6323_ID_VCAMAF,
+ MT6323_ID_VIBR,
+ MT6323_ID_VRF18,
+ MT6323_ID_VM,
+ MT6323_ID_VIO18,
+ MT6323_ID_VCAMD,
+ MT6323_ID_VCAMIO,
+ MT6323_ID_RG_MAX,
+};
+
+#define MT6323_MAX_REGULATOR MT6323_ID_RG_MAX
+
+#endif /* __LINUX_REGULATOR_MT6323_H */
--
1.7.10.4
Powered by blists - more mailing lists