[<prev] [next>] [day] [month] [year] [list]
Message-Id: <1468867177-15007-9-git-send-email-okaya@codeaurora.org>
Date: Mon, 18 Jul 2016 14:39:35 -0400
From: Sinan Kaya <okaya@...eaurora.org>
To: dmaengine@...r.kernel.org, timur@...eaurora.org,
devicetree@...r.kernel.org, cov@...eaurora.org,
vinod.koul@...el.com, jcm@...hat.com
Cc: eric.auger@...aro.org, agross@...eaurora.org, arnd@...db.de,
linux-arm-msm@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
Sinan Kaya <okaya@...eaurora.org>,
Dan Williams <dan.j.williams@...el.com>,
linux-kernel@...r.kernel.org
Subject: [PATCH 08/10] dmaengine: qcom_hidma: bring out interrupt cause
Bring out the interrupt cause to the top level so that MSI interrupts
can be hooked at a later stage.
Signed-off-by: Sinan Kaya <okaya@...eaurora.org>
---
drivers/dma/qcom/hidma_ll.c | 60 ++++++++++++++++++++-------------------------
1 file changed, 27 insertions(+), 33 deletions(-)
diff --git a/drivers/dma/qcom/hidma_ll.c b/drivers/dma/qcom/hidma_ll.c
index 2753210..eb78952 100644
--- a/drivers/dma/qcom/hidma_ll.c
+++ b/drivers/dma/qcom/hidma_ll.c
@@ -403,12 +403,18 @@ static void hidma_ll_abort(unsigned long arg)
* requests traditionally to the destination, this concept does not apply
* here for this HW.
*/
-irqreturn_t hidma_ll_inthandler(int chirq, void *arg)
+static void hidma_ll_int_handler_internal(struct hidma_lldev *lldev, int cause)
{
- struct hidma_lldev *lldev = arg;
- u32 status;
- u32 enable;
- u32 cause;
+ if (cause & HIDMA_ERR_INT_MASK) {
+ dev_err(lldev->dev, "error 0x%x, resetting...\n",
+ cause);
+
+ /* Clear out pending interrupts */
+ writel(cause, lldev->evca + HIDMA_EVCA_IRQ_CLR_REG);
+
+ tasklet_schedule(&lldev->rst_task);
+ return;
+ }
/*
* Fine tuned for this HW...
@@ -418,40 +424,28 @@ irqreturn_t hidma_ll_inthandler(int chirq, void *arg)
* interrupt delivery guarantees. Do not copy this code blindly and
* expect that to work.
*/
- status = readl_relaxed(lldev->evca + HIDMA_EVCA_IRQ_STAT_REG);
- enable = readl_relaxed(lldev->evca + HIDMA_EVCA_IRQ_EN_REG);
- cause = status & enable;
-
- while (cause) {
- if (cause & HIDMA_ERR_INT_MASK) {
- dev_err(lldev->dev, "error 0x%x, resetting...\n",
- cause);
-
- /* Clear out pending interrupts */
- writel(cause, lldev->evca + HIDMA_EVCA_IRQ_CLR_REG);
-
- tasklet_schedule(&lldev->rst_task);
- goto out;
- }
-
+ while (atomic_read(&lldev->pending_tre_count)) {
/*
* Try to consume as many EVREs as possible.
*/
- hidma_handle_tre_completion(lldev);
+ hidma_handle_tre_completion(lldev, 0, 0);
+ }
- /* We consumed TREs or there are pending TREs or EVREs. */
- writel_relaxed(cause, lldev->evca + HIDMA_EVCA_IRQ_CLR_REG);
+ /* We consumed TREs or there are pending TREs or EVREs. */
+ writel_relaxed(cause, lldev->evca + HIDMA_EVCA_IRQ_CLR_REG);
+}
- /*
- * Another interrupt might have arrived while we are
- * processing this one. Read the new cause.
- */
- status = readl_relaxed(lldev->evca + HIDMA_EVCA_IRQ_STAT_REG);
- enable = readl_relaxed(lldev->evca + HIDMA_EVCA_IRQ_EN_REG);
- cause = status & enable;
- }
+irqreturn_t hidma_ll_inthandler(int chirq, void *arg)
+{
+ struct hidma_lldev *lldev = arg;
+ u32 status;
+ u32 enable;
+ u32 cause;
-out:
+ status = readl_relaxed(lldev->evca + HIDMA_EVCA_IRQ_STAT_REG);
+ enable = readl_relaxed(lldev->evca + HIDMA_EVCA_IRQ_EN_REG);
+ cause = status & enable;
+ hidma_ll_int_handler_internal(lldev, cause);
return IRQ_HANDLED;
}
--
1.8.2.1
Powered by blists - more mailing lists