[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20160720141139.25098-1-maxime.ripard@free-electrons.com>
Date: Wed, 20 Jul 2016 16:11:35 +0200
From: Maxime Ripard <maxime.ripard@...e-electrons.com>
To: Linus Walleij <linus.walleij@...aro.org>,
Alexandre Courbot <gnurou@...il.com>,
Lee Jones <lee.jones@...aro.org>, Chen-Yu Tsai <wens@...e.org>
Cc: devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-gpio@...r.kernel.org, linux-kernel@...r.kernel.org,
Hans de Goede <hdegoede@...hat.com>,
Maxime Ripard <maxime.ripard@...e-electrons.com>
Subject: [PATCH v2 0/4] Add AXP209 GPIO driver
Hi,
The axp209 PMIC used in combination to some Allwinner SoCs has a bunch
of GPIOs accessible. Some boards use these to control their backlight
or a few LEDs.
There's supposed to be 4 of them, but the fourth one has a different
configuration register scheme, and I couldn't find any board that was
using this GPIO. It will be probably be supported eventually, but
until then, we support only the first 3 GPIOs.
Let me know what you think,
Maxime
Changes from v1:
- Use gpiochip_add_data and gpiochip_get_data
- Drop unneeded headers
- Make sure gpio_get returns 0 or 1
- Made sure it compiles
- Rebased on linux-next
Maxime Ripard (4):
gpio: Add AXP209 GPIO driver
mfd: axp20x: Add AXP209 GPIO driver to the mfd
ARM: dt: axp209: Add AXP209 GPIO driver
ARM: sun5i: chip: Add status LED
.../devicetree/bindings/gpio/gpio-axp209.txt | 30 ++++
arch/arm/boot/dts/axp209.dtsi | 6 +
arch/arm/boot/dts/sun5i-r8-chip.dts | 10 ++
drivers/gpio/Kconfig | 6 +
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-axp209.c | 162 +++++++++++++++++++++
drivers/mfd/axp20x.c | 3 +
7 files changed, 218 insertions(+)
create mode 100644 Documentation/devicetree/bindings/gpio/gpio-axp209.txt
create mode 100644 drivers/gpio/gpio-axp209.c
--
2.9.0
Powered by blists - more mailing lists