linux-kernel - [RFC 3/3] serial: pch_uart: Add support for reading clock-frequency from DT

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <1469035277-40919-4-git-send-email-Zubair.Kakakhel@imgtec.com>
Date:	Wed, 20 Jul 2016 18:21:17 +0100
From:	Zubair Lutfullah Kakakhel <Zubair.Kakakhel@...tec.com>
To:	<gregkh@...uxfoundation.org>, <arnd@...db.de>
CC:	<jslaby@...e.com>, <linux-kernel@...r.kernel.org>,
	<linux-serial@...r.kernel.org>, <Zubair.Kakakhel@...tec.com>
Subject: [RFC 3/3] serial: pch_uart: Add support for reading clock-frequency from DT

The MIPS based Boston platform provides a 25MHz clock to the UART.

Enable the driver for MIPS and add support in the driver to read
the frequency from device tree.

Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@...tec.com>
---
 drivers/tty/serial/Kconfig    | 2 +-
 drivers/tty/serial/pch_uart.c | 4 ++++
 2 files changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 7e3a58c..b4a8d92 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1379,7 +1379,7 @@ config SERIAL_IFX6X60
 
 config SERIAL_PCH_UART
 	tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) UART"
-	depends on PCI && (X86_32 || COMPILE_TEST)
+	depends on PCI && (X86_32 || MIPS ||  COMPILE_TEST)
 	select SERIAL_CORE
 	help
 	  This driver is for PCH(Platform controller Hub) UART of Intel EG20T
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index ea4ffc2..d79265c935 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -1826,6 +1826,10 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev,
 	priv->trigger_level = 1;
 	priv->fcr = 0;
 
+	if (pdev->dev.of_node)
+		of_property_read_u32(pdev->dev.of_node, "clock-frequency"
+					 , &user_uartclk);
+
 #ifdef CONFIG_SERIAL_PCH_UART_CONSOLE
 	pch_uart_ports[board->line_no] = priv;
 #endif
-- 
1.9.1