linux-kernel - [PATCH v4 0/3] hwmon: xgene: Add support for X-Gene hwmon driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <1469140653-2287-1-git-send-email-hotran@apm.com>
Date:	Thu, 21 Jul 2016 15:37:30 -0700
From:	Hoan Tran <hotran@....com>
To:	Jean Delvare <jdelvare@...e.com>,
	Guenter Roeck <linux@...ck-us.net>,
	Jonathan Corbet <corbet@....net>,
	Rob Herring <robh+dt@...nel.org>
Cc:	Jassi Brar <jassisinghbrar@...il.com>,
	Ashwin Chaugule <ashwin.chaugule@...aro.org>,
	Duc Dang <dhdang@....com>, lho@....com,
	linux-hwmon@...r.kernel.org, linux-doc@...r.kernel.org,
	linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
	devicetree@...r.kernel.org, Hoan Tran <hotran@....com>
Subject: [PATCH v4 0/3] hwmon: xgene: Add support for X-Gene hwmon driver

This patch set adds hardware temperature and power reading support for
APM X-Gene SoC using the mailbox communication interface.
For device tree, it is the standard DT mailbox.
For ACPI, it is the PCC mailbox.

For ACPI, this patch is built on top and depends on patch[1]:
[1] http://www.spinics.net/lists/linux-acpi/msg66041.html
 - [PATCH v3] mailbox: pcc: Support HW-Reduced Communication Subspace type 2

v4
 - Return 0 if driver registers successfully
 
v3
 - Order include files alphabetically
 - Use sign_extend32() to decode temperature
 - Use DEVICE_ATTR_RO() for temperature and power attributes
 - Temperature and power attributes start with index 1
 - Use !!amsg->param2
 - Fix checkpatch WARNING with --strict flag
 - Use hwmon_device_register_with_groups()
 - Check invalid sensor data

v2
 - Increase power reading accurateness by using 2 registers
(a register for Watt, another for milli-Watt)
 - Remove power reading for SoC
 - Fix review comments from Guenter

v1
 - Initial

Hoan Tran (3):
  Documentation: dtb: xgene: Add hwmon dts binding documentation
  hwmon: xgene: Add hwmon driver
  arm64: dts: apm: Add X-Gene SoC hwmon to device tree

 .../devicetree/bindings/hwmon/apm-xgene-hwmon.txt  |  14 +
 Documentation/hwmon/xgene-hwmon                    |  30 +
 arch/arm64/boot/dts/apm/apm-shadowcat.dtsi         |   5 +
 arch/arm64/boot/dts/apm/apm-storm.dtsi             |   5 +
 drivers/hwmon/Kconfig                              |   7 +
 drivers/hwmon/Makefile                             |   1 +
 drivers/hwmon/xgene-hwmon.c                        | 755 +++++++++++++++++++++
 7 files changed, 817 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/hwmon/apm-xgene-hwmon.txt
 create mode 100644 Documentation/hwmon/xgene-hwmon
 create mode 100644 drivers/hwmon/xgene-hwmon.c

-- 
1.9.1