linux-kernel - [PATCH v3 2/4] dt-bindings: Document the STM32 reset bindings

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1469180270-5446-3-git-send-email-gabriel.fernandez@st.com>
Date:	Fri, 22 Jul 2016 11:37:48 +0200
From:	<gabriel.fernandez@...com>
To:	Philipp Zabel <p.zabel@...gutronix.de>,
	Rob Herring <robh+dt@...nel.org>,
	Mark Rutland <mark.rutland@....com>,
	Maxime Coquelin <mcoquelin.stm32@...il.com>,
	Russell King <linux@...linux.org.uk>, <patrice.chotard@...com>,
	<alexandre.torgue@...com>
CC:	<devicetree@...r.kernel.org>,
	<linux-arm-kernel@...ts.infradead.org>,
	<linux-kernel@...r.kernel.org>,
	Gabriel Fernandez <gabriel.fernandez@...com>
Subject: [PATCH v3 2/4] dt-bindings: Document the STM32 reset bindings

From: Maxime Coquelin <mcoquelin.stm32@...il.com>

This adds documentation of device tree bindings for the
STM32 reset controller.

Signed-off-by: Maxime Coquelin <mcoquelin.stm32@...il.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@...com>
Acked-by: Rob Herring <robh@...nel.org>
---
 .../devicetree/bindings/clock/st,stm32-rcc.txt     | 42 ++++++++++++++++++----
 .../devicetree/bindings/reset/st,stm32-rcc.txt     |  6 ++++
 2 files changed, 41 insertions(+), 7 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/reset/st,stm32-rcc.txt

diff --git a/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt b/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt
index fee3205..c209de6 100644
--- a/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt
+++ b/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt
@@ -1,16 +1,16 @@
 STMicroelectronics STM32 Reset and Clock Controller
 ===================================================
 
-The RCC IP is both a reset and a clock controller. This documentation only
-describes the clock part.
+The RCC IP is both a reset and a clock controller.
 
-Please also refer to clock-bindings.txt in this directory for common clock
-controller binding usage.
+Please refer to clock-bindings.txt for common clock controller binding usage.
+Please also refer to reset.txt for common reset controller binding usage.
 
 Required properties:
 - compatible: Should be "st,stm32f42xx-rcc"
 - reg: should be register base and length as documented in the
   datasheet
+- #reset-cells: 1, see below
 - #clock-cells: 2, device nodes should specify the clock in their "clocks"
   property, containing a phandle to the clock device node, an index selecting
   between gated clocks and other clocks and an index specifying the clock to
@@ -19,6 +19,7 @@ Required properties:
 Example:
 
 	rcc: rcc@...23800 {
+		#reset-cells = <1>;
 		#clock-cells = <2>
 		compatible = "st,stm32f42xx-rcc", "st,stm32-rcc";
 		reg = <0x40023800 0x400>;
@@ -35,16 +36,23 @@ from the first RCC clock enable register (RCC_AHB1ENR, address offset 0x30).
 It is calculated as: index = register_offset / 4 * 32 + bit_offset.
 Where bit_offset is the bit offset within the register (LSB is 0, MSB is 31).
 
+To simplify the usage and to share bit definition with the reset and clock
+drivers of the RCC IP, macros are available to generate the index in
+human-readble format.
+
+For STM32F4 series, the macro are available here:
+ - include/dt-bindings/mfd/stm32f4-rcc.h
+
 Example:
 
 	/* Gated clock, AHB1 bit 0 (GPIOA) */
 	... {
-		clocks = <&rcc 0 0>
+		clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOA)>
 	};
 
 	/* Gated clock, AHB2 bit 4 (CRYP) */
 	... {
-		clocks = <&rcc 0 36>
+		clocks = <&rcc 0 STM32F4_AHB2_CLOCK(CRYP)>
 	};
 
 Specifying other clocks
@@ -61,5 +69,25 @@ Example:
 
 	/* Misc clock, FCLK */
 	... {
-		clocks = <&rcc 1 1>
+		clocks = <&rcc 1 STM32F4_APB1_CLOCK(TIM2)>
+	};
+
+
+Specifying softreset control of devices
+=======================================
+
+Device nodes should specify the reset channel required in their "resets"
+property, containing a phandle to the reset device node and an index specifying
+which channel to use.
+The index is the bit number within the RCC registers bank, starting from RCC
+base address.
+It is calculated as: index = register_offset / 4 * 32 + bit_offset.
+Where bit_offset is the bit offset within the register.
+For example, for CRC reset:
+  crc = AHB1RSTR_offset / 4 * 32 + CRCRST_bit_offset = 0x10 / 4 * 32 + 12 = 140
+
+example:
+
+	timer2 {
+		resets	= <&rcc STM32F4_APB1_RESET(TIM2)>;
 	};
diff --git a/Documentation/devicetree/bindings/reset/st,stm32-rcc.txt b/Documentation/devicetree/bindings/reset/st,stm32-rcc.txt
new file mode 100644
index 0000000..01db343
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/st,stm32-rcc.txt
@@ -0,0 +1,6 @@
+STMicroelectronics STM32 Peripheral Reset Controller
+====================================================
+
+The RCC IP is both a reset and a clock controller.
+
+Please see Documentation/devicetree/bindings/clock/st,stm32-rcc.txt
-- 
1.9.1