| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1469221759-17652-8-git-send-email-LinoSanfilippo@gmx.de>
Date: Fri, 22 Jul 2016 23:09:17 +0200
From: Lino Sanfilippo <LinoSanfilippo@....de>
To: liodot@...il.com, charrer@...critech.com,
gregkh@...uxfoundation.org
Cc: devel@...verdev.osuosl.org, linux-kernel@...r.kernel.org,
netdev@...r.kernel.org, Lino Sanfilippo <LinoSanfilippo@....de>
Subject: [PATCH 7/9] staging: slicoss: dont use a structure but offsets for register accesses
Use the new register accessors that use offsets instead of the slic_regs
structure to read/write registers. Since not longer needed remove the
structure completley.
Signed-off-by: Lino Sanfilippo <LinoSanfilippo@....de>
---
drivers/staging/slicoss/slic.h | 1 -
drivers/staging/slicoss/slichw.h | 219 --------------------------
drivers/staging/slicoss/slicoss.c | 323 ++++++++++++++------------------------
3 files changed, 120 insertions(+), 423 deletions(-)
diff --git a/drivers/staging/slicoss/slic.h b/drivers/staging/slicoss/slic.h
index 230d30b..3bba82a 100644
--- a/drivers/staging/slicoss/slic.h
+++ b/drivers/staging/slicoss/slic.h
@@ -417,7 +417,6 @@ struct adapter {
struct slic_shmem *pshmem;
dma_addr_t phys_shmem;
u32 isrcopy;
- __iomem struct slic_regs *slic_regs;
void __iomem *regs;
unsigned char state;
unsigned char linkstate;
diff --git a/drivers/staging/slicoss/slichw.h b/drivers/staging/slicoss/slichw.h
index f06450e..ae04bf6 100644
--- a/drivers/staging/slicoss/slichw.h
+++ b/drivers/staging/slicoss/slichw.h
@@ -402,225 +402,6 @@ struct slic_rspbuf {
#define SLIC_REG_HOSTID 0x1554
-struct slic_regs {
- u32 slic_reset; /* Reset Register */
- u32 pad0;
-
- u32 slic_icr; /* Interrupt Control Register */
- u32 pad2;
-#define SLIC_ICR 0x0008
-
- u32 slic_isp; /* Interrupt status pointer */
- u32 pad1;
-#define SLIC_ISP 0x0010
-
- u32 slic_isr; /* Interrupt status */
- u32 pad3;
-#define SLIC_ISR 0x0018
-
- u32 slic_hbar; /* Header buffer address reg */
- u32 pad4;
- /*
- * 31-8 - phy addr of set of contiguous hdr buffers
- * 7-0 - number of buffers passed
- * Buffers are 256 bytes long on 256-byte boundaries.
- */
-#define SLIC_HBAR 0x0020
-#define SLIC_HBAR_CNT_MSK 0x000000FF
-
- u32 slic_dbar; /* Data buffer handle & address reg */
- u32 pad5;
-
- /* 4 sets of registers; Buffers are 2K bytes long 2 per 4K page. */
-#define SLIC_DBAR 0x0028
-#define SLIC_DBAR_SIZE 2048
-
- u32 slic_cbar; /* Xmt Cmd buf addr regs.*/
- /*
- * 1 per XMT interface
- * 31-5 - phy addr of host command buffer
- * 4-0 - length of cmd in multiples of 32 bytes
- * Buffers are 32 bytes up to 512 bytes long
- */
-#define SLIC_CBAR 0x0030
-#define SLIC_CBAR_LEN_MSK 0x0000001F
-#define SLIC_CBAR_ALIGN 0x00000020
-
- u32 slic_wcs; /* write control store*/
-#define SLIC_WCS 0x0034
-#define SLIC_WCS_START 0x80000000 /*Start the SLIC (Jump to WCS)*/
-#define SLIC_WCS_COMPARE 0x40000000 /* Compare with value in WCS*/
-
- u32 slic_rbar; /* Response buffer address reg.*/
- u32 pad7;
- /*
- * 31-8 - phy addr of set of contiguous response buffers
- * 7-0 - number of buffers passed
- * Buffers are 32 bytes long on 32-byte boundaries.
- */
-#define SLIC_RBAR 0x0038
-#define SLIC_RBAR_CNT_MSK 0x000000FF
-#define SLIC_RBAR_SIZE 32
-
- u32 slic_stats; /* read statistics (UPR) */
- u32 pad8;
-#define SLIC_RSTAT 0x0040
-
- u32 slic_rlsr; /* read link status */
- u32 pad9;
-#define SLIC_LSTAT 0x0048
-
- u32 slic_wmcfg; /* Write Mac Config */
- u32 pad10;
-#define SLIC_WMCFG 0x0050
-
- u32 slic_wphy; /* Write phy register */
- u32 pad11;
-#define SLIC_WPHY 0x0058
-
- u32 slic_rcbar; /* Rcv Cmd buf addr reg */
- u32 pad12;
-#define SLIC_RCBAR 0x0060
-
- u32 slic_rconfig; /* Read SLIC Config*/
- u32 pad13;
-#define SLIC_RCONFIG 0x0068
-
- u32 slic_intagg; /* Interrupt aggregation time */
- u32 pad14;
-#define SLIC_INTAGG 0x0070
-
- u32 slic_wxcfg; /* Write XMIT config reg*/
- u32 pad16;
-#define SLIC_WXCFG 0x0078
-
- u32 slic_wrcfg; /* Write RCV config reg*/
- u32 pad17;
-#define SLIC_WRCFG 0x0080
-
- u32 slic_wraddral; /* Write rcv addr a low*/
- u32 pad18;
-#define SLIC_WRADDRAL 0x0088
-
- u32 slic_wraddrah; /* Write rcv addr a high*/
- u32 pad19;
-#define SLIC_WRADDRAH 0x0090
-
- u32 slic_wraddrbl; /* Write rcv addr b low*/
- u32 pad20;
-#define SLIC_WRADDRBL 0x0098
-
- u32 slic_wraddrbh; /* Write rcv addr b high*/
- u32 pad21;
-#define SLIC_WRADDRBH 0x00a0
-
- u32 slic_mcastlow; /* Low bits of mcast mask*/
- u32 pad22;
-#define SLIC_MCASTLOW 0x00a8
-
- u32 slic_mcasthigh; /* High bits of mcast mask*/
- u32 pad23;
-#define SLIC_MCASTHIGH 0x00b0
-
- u32 slic_ping; /* Ping the card*/
- u32 pad24;
-#define SLIC_PING 0x00b8
-
- u32 slic_dump_cmd; /* Dump command */
- u32 pad25;
-#define SLIC_DUMP_CMD 0x00c0
-
- u32 slic_dump_data; /* Dump data pointer */
- u32 pad26;
-#define SLIC_DUMP_DATA 0x00c8
-
- u32 slic_pcistatus; /* Read card's pci_status register */
- u32 pad27;
-#define SLIC_PCISTATUS 0x00d0
-
- u32 slic_wrhostid; /* Write hostid field */
- u32 pad28;
-#define SLIC_WRHOSTID 0x00d8
-#define SLIC_RDHOSTID_1GB 0x1554
-#define SLIC_RDHOSTID_2GB 0x1554
-
- u32 slic_low_power; /* Put card in a low power state */
- u32 pad29;
-#define SLIC_LOW_POWER 0x00e0
-
- u32 slic_quiesce; /* force slic into quiescent state
- * before soft reset
- */
- u32 pad30;
-#define SLIC_QUIESCE 0x00e8
-
- u32 slic_reset_iface;/* reset interface queues */
- u32 pad31;
-#define SLIC_RESET_IFACE 0x00f0
-
- u32 slic_addr_upper;/* Bits 63-32 for host i/f addrs */
- u32 pad32;
-#define SLIC_ADDR_UPPER 0x00f8 /*Register is only written when it has changed*/
-
- u32 slic_hbar64; /* 64 bit Header buffer address reg */
- u32 pad33;
-#define SLIC_HBAR64 0x0100
-
- u32 slic_dbar64; /* 64 bit Data buffer handle & address reg */
- u32 pad34;
-#define SLIC_DBAR64 0x0108
-
- u32 slic_cbar64; /* 64 bit Xmt Cmd buf addr regs. */
- u32 pad35;
-#define SLIC_CBAR64 0x0110
-
- u32 slic_rbar64; /* 64 bit Response buffer address reg.*/
- u32 pad36;
-#define SLIC_RBAR64 0x0118
-
- u32 slic_rcbar64; /* 64 bit Rcv Cmd buf addr reg*/
- u32 pad37;
-#define SLIC_RCBAR64 0x0120
-
- u32 slic_stats64; /* read statistics (64 bit UPR) */
- u32 pad38;
-#define SLIC_RSTAT64 0x0128
-
- u32 slic_rcv_wcs; /*Download Gigabit RCV sequencer ucode*/
- u32 pad39;
-#define SLIC_RCV_WCS 0x0130
-#define SLIC_RCVWCS_BEGIN 0x40000000
-#define SLIC_RCVWCS_FINISH 0x80000000
-
- u32 slic_wrvlanid; /* Write VlanId field */
- u32 pad40;
-#define SLIC_WRVLANID 0x0138
-
- u32 slic_read_xf_info; /* Read Transformer info */
- u32 pad41;
-#define SLIC_READ_XF_INFO 0x0140
-
- u32 slic_write_xf_info; /* Write Transformer info */
- u32 pad42;
-#define SLIC_WRITE_XF_INFO 0x0148
-
- u32 RSVD1; /* TOE Only */
- u32 pad43;
-
- u32 RSVD2; /* TOE Only */
- u32 pad44;
-
- u32 RSVD3; /* TOE Only */
- u32 pad45;
-
- u32 RSVD4; /* TOE Only */
- u32 pad46;
-
- u32 slic_ticks_per_sec; /* Write card ticks per second */
- u32 pad47;
-#define SLIC_TICKS_PER_SEC 0x0170
-};
-
enum UPR_REQUEST {
SLIC_UPR_STATS,
SLIC_UPR_RLSR,
diff --git a/drivers/staging/slicoss/slicoss.c b/drivers/staging/slicoss/slicoss.c
index 0c2f86a0..8e978e7 100644
--- a/drivers/staging/slicoss/slicoss.c
+++ b/drivers/staging/slicoss/slicoss.c
@@ -128,27 +128,6 @@ static struct ethtool_ops slic_ethtool_ops;
MODULE_DEVICE_TABLE(pci, slic_pci_tbl);
-static inline void slic_reg32_write(void __iomem *reg, u32 value, bool flush)
-{
- writel(value, reg);
- if (flush)
- mb();
-}
-
-static inline void slic_reg64_write(struct adapter *adapter, void __iomem *reg,
- u32 value, void __iomem *regh, u32 paddrh,
- bool flush)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&adapter->bit64reglock, flags);
- writel(paddrh, regh);
- writel(value, reg);
- if (flush)
- mb();
- spin_unlock_irqrestore(&adapter->bit64reglock, flags);
-}
-
static void slic_mcast_set_bit(struct adapter *adapter, char *address)
{
unsigned char crcpoly;
@@ -172,8 +151,6 @@ static void slic_mcast_set_bit(struct adapter *adapter, char *address)
static void slic_mcast_set_mask(struct adapter *adapter)
{
- __iomem struct slic_regs *slic_regs = adapter->slic_regs;
-
if (adapter->macopts & (MAC_ALLMCAST | MAC_PROMISC)) {
/*
* Turn on all multicast addresses. We have to do this for
@@ -181,18 +158,17 @@ static void slic_mcast_set_mask(struct adapter *adapter)
* Microcode from having to keep state about the MAC
* configuration.
*/
- slic_reg32_write(&slic_regs->slic_mcastlow, 0xFFFFFFFF, FLUSH);
- slic_reg32_write(&slic_regs->slic_mcasthigh, 0xFFFFFFFF,
- FLUSH);
+ slic_write32(adapter, SLIC_REG_MCASTLOW, 0xFFFFFFFF);
+ slic_write32(adapter, SLIC_REG_MCASTHIGH, 0xFFFFFFFF);
} else {
/*
* Commit our multicast mast to the SLIC by writing to the
* multicast address mask registers
*/
- slic_reg32_write(&slic_regs->slic_mcastlow,
- (u32)(adapter->mcastmask & 0xFFFFFFFF), FLUSH);
- slic_reg32_write(&slic_regs->slic_mcasthigh,
- (u32)((adapter->mcastmask >> 32) & 0xFFFFFFFF), FLUSH);
+ slic_write32(adapter, SLIC_REG_MCASTLOW,
+ (u32)(adapter->mcastmask & 0xFFFFFFFF));
+ slic_write32(adapter, SLIC_REG_MCASTHIGH,
+ (u32)((adapter->mcastmask >> 32) & 0xFFFFFFFF));
}
}
@@ -208,13 +184,6 @@ static void slic_timer_ping(ulong dev)
add_timer(&adapter->pingtimer);
}
-static void slic_unmap_mmio_space(struct adapter *adapter)
-{
- if (adapter->slic_regs)
- iounmap(adapter->slic_regs);
- adapter->slic_regs = NULL;
-}
-
/*
* slic_link_config
*
@@ -224,7 +193,6 @@ static void slic_unmap_mmio_space(struct adapter *adapter)
static void slic_link_config(struct adapter *adapter,
u32 linkspeed, u32 linkduplex)
{
- u32 __iomem *wphy;
u32 speed;
u32 duplex;
u32 phy_config;
@@ -239,8 +207,6 @@ static void slic_link_config(struct adapter *adapter,
if (linkduplex > LINK_AUTOD)
linkduplex = LINK_AUTOD;
- wphy = &adapter->slic_regs->slic_wphy;
-
if ((linkspeed == LINK_AUTOSPEED) || (linkspeed == LINK_1000MB)) {
if (adapter->flags & ADAPT_FLAGS_FIBERMEDIA) {
/*
@@ -252,7 +218,7 @@ static void slic_link_config(struct adapter *adapter,
phy_advreg = (MIICR_REG_4 | (PAR_ADV1000XFD));
/* enable PAUSE frames */
phy_advreg |= PAR_ASYMPAUSE_FIBER;
- slic_reg32_write(wphy, phy_advreg, FLUSH);
+ slic_write32(adapter, SLIC_REG_WPHY, phy_advreg);
if (linkspeed == LINK_AUTOSPEED) {
/* reset phy, enable auto-neg */
@@ -260,14 +226,16 @@ static void slic_link_config(struct adapter *adapter,
(MIICR_REG_PCR |
(PCR_RESET | PCR_AUTONEG |
PCR_AUTONEG_RST));
- slic_reg32_write(wphy, phy_config, FLUSH);
+ slic_write32(adapter, SLIC_REG_WPHY,
+ phy_config);
} else { /* forced 1000 Mb FD*/
/*
* power down phy to break link
* this may not work)
*/
phy_config = (MIICR_REG_PCR | PCR_POWERDOWN);
- slic_reg32_write(wphy, phy_config, FLUSH);
+ slic_write32(adapter, SLIC_REG_WPHY,
+ phy_config);
slic_flush_write(adapter);
/*
* wait, Marvell says 1 sec,
@@ -283,7 +251,8 @@ static void slic_link_config(struct adapter *adapter,
(MIICR_REG_PCR |
(PCR_RESET | PCR_SPEED_1000 |
PCR_DUPLEX_FULL));
- slic_reg32_write(wphy, phy_config, FLUSH);
+ slic_write32(adapter, SLIC_REG_WPHY,
+ phy_config);
}
} else { /* copper gigabit */
@@ -310,10 +279,10 @@ static void slic_link_config(struct adapter *adapter,
phy_advreg |= PAR_ASYMPAUSE;
/* required by the Cicada PHY */
phy_advreg |= PAR_802_3;
- slic_reg32_write(wphy, phy_advreg, FLUSH);
+ slic_write32(adapter, SLIC_REG_WPHY, phy_advreg);
/* advertise FD only @1000 Mb */
phy_gctlreg = (MIICR_REG_9 | (PGC_ADV1000FD));
- slic_reg32_write(wphy, phy_gctlreg, FLUSH);
+ slic_write32(adapter, SLIC_REG_WPHY, phy_gctlreg);
if (adapter->subsysid != SLIC_1GB_CICADA_SUBSYS_ID) {
/*
@@ -322,20 +291,23 @@ static void slic_link_config(struct adapter *adapter,
*/
phy_config =
(MIICR_REG_16 | (MRV_REG16_XOVERON));
- slic_reg32_write(wphy, phy_config, FLUSH);
+ slic_write32(adapter, SLIC_REG_WPHY,
+ phy_config);
/* reset phy, enable auto-neg */
phy_config =
(MIICR_REG_PCR |
(PCR_RESET | PCR_AUTONEG |
PCR_AUTONEG_RST));
- slic_reg32_write(wphy, phy_config, FLUSH);
+ slic_write32(adapter, SLIC_REG_WPHY,
+ phy_config);
} else { /* it's a Cicada PHY */
/* enable and restart auto-neg (don't reset) */
phy_config =
(MIICR_REG_PCR |
(PCR_AUTONEG | PCR_AUTONEG_RST));
- slic_reg32_write(wphy, phy_config, FLUSH);
+ slic_write32(adapter, SLIC_REG_WPHY,
+ phy_config);
}
}
} else {
@@ -355,12 +327,12 @@ static void slic_link_config(struct adapter *adapter,
* disable auto crossover
*/
phy_config = (MIICR_REG_16 | (MRV_REG16_XOVEROFF));
- slic_reg32_write(wphy, phy_config, FLUSH);
+ slic_write32(adapter, SLIC_REG_WPHY, phy_config);
}
/* power down phy to break link (this may not work) */
phy_config = (MIICR_REG_PCR | (PCR_POWERDOWN | speed | duplex));
- slic_reg32_write(wphy, phy_config, FLUSH);
+ slic_write32(adapter, SLIC_REG_WPHY, phy_config);
slic_flush_write(adapter);
/* wait, Marvell says 1 sec, try to get away with 10 ms */
mdelay(10);
@@ -373,11 +345,11 @@ static void slic_link_config(struct adapter *adapter,
*/
phy_config =
(MIICR_REG_PCR | (PCR_RESET | speed | duplex));
- slic_reg32_write(wphy, phy_config, FLUSH);
+ slic_write32(adapter, SLIC_REG_WPHY, phy_config);
} else { /* it's a Cicada PHY */
/* disable auto-neg, set speed, powerup */
phy_config = (MIICR_REG_PCR | (speed | duplex));
- slic_reg32_write(wphy, phy_config, FLUSH);
+ slic_write32(adapter, SLIC_REG_WPHY, phy_config);
}
}
}
@@ -387,7 +359,6 @@ static int slic_card_download_gbrcv(struct adapter *adapter)
const struct firmware *fw;
const char *file = "";
int ret;
- __iomem struct slic_regs *slic_regs = adapter->slic_regs;
u32 codeaddr;
u32 instruction;
int index = 0;
@@ -428,27 +399,26 @@ static int slic_card_download_gbrcv(struct adapter *adapter)
break;
}
/* start download */
- slic_reg32_write(&slic_regs->slic_rcv_wcs, SLIC_RCVWCS_BEGIN, FLUSH);
+ slic_write32(adapter, SLIC_REG_RCV_WCS, SLIC_RCVWCS_BEGIN);
/* download the rcv sequencer ucode */
for (codeaddr = 0; codeaddr < rcvucodelen; codeaddr++) {
/* write out instruction address */
- slic_reg32_write(&slic_regs->slic_rcv_wcs, codeaddr, FLUSH);
+ slic_write32(adapter, SLIC_REG_RCV_WCS, codeaddr);
instruction = *(u32 *)(fw->data + index);
index += 4;
/* write out the instruction data low addr */
- slic_reg32_write(&slic_regs->slic_rcv_wcs, instruction, FLUSH);
+ slic_write32(adapter, SLIC_REG_RCV_WCS, instruction);
instruction = *(u8 *)(fw->data + index);
index++;
/* write out the instruction data high addr */
- slic_reg32_write(&slic_regs->slic_rcv_wcs, (u8)instruction,
- FLUSH);
+ slic_write32(adapter, SLIC_REG_RCV_WCS, instruction);
}
/* download finished */
release_firmware(fw);
- slic_reg32_write(&slic_regs->slic_rcv_wcs, SLIC_RCVWCS_FINISH, FLUSH);
+ slic_write32(adapter, SLIC_REG_RCV_WCS, SLIC_RCVWCS_FINISH);
slic_flush_write(adapter);
return 0;
@@ -465,7 +435,6 @@ static int slic_card_download(struct adapter *adapter)
u32 section;
int thissectionsize;
int codeaddr;
- __iomem struct slic_regs *slic_regs = adapter->slic_regs;
u32 instruction;
u32 baseaddress;
u32 i;
@@ -509,17 +478,17 @@ static int slic_card_download(struct adapter *adapter)
for (codeaddr = 0; codeaddr < thissectionsize; codeaddr++) {
/* Write out instruction address */
- slic_reg32_write(&slic_regs->slic_wcs,
- baseaddress + codeaddr, FLUSH);
+ slic_write32(adapter, SLIC_REG_WCS,
+ baseaddress + codeaddr);
/* Write out instruction to low addr */
- slic_reg32_write(&slic_regs->slic_wcs,
- instruction, FLUSH);
+ slic_write32(adapter, SLIC_REG_WCS,
+ instruction);
instruction = *(u32 *)(fw->data + index);
index += 4;
/* Write out instruction to high addr */
- slic_reg32_write(&slic_regs->slic_wcs,
- instruction, FLUSH);
+ slic_write32(adapter, SLIC_REG_WCS,
+ instruction);
instruction = *(u32 *)(fw->data + index);
index += 4;
}
@@ -534,17 +503,15 @@ static int slic_card_download(struct adapter *adapter)
for (codeaddr = 0; codeaddr < thissectionsize; codeaddr++) {
/* Write out instruction address */
- slic_reg32_write(&slic_regs->slic_wcs,
- SLIC_WCS_COMPARE | (baseaddress + codeaddr),
- FLUSH);
+ slic_write32(adapter, SLIC_REG_WCS,
+ SLIC_WCS_COMPARE | (baseaddress +
+ codeaddr));
/* Write out instruction to low addr */
- slic_reg32_write(&slic_regs->slic_wcs, instruction,
- FLUSH);
+ slic_write32(adapter, SLIC_REG_WCS, instruction);
instruction = *(u32 *)(fw->data + index);
index += 4;
/* Write out instruction to high addr */
- slic_reg32_write(&slic_regs->slic_wcs, instruction,
- FLUSH);
+ slic_write32(adapter, SLIC_REG_WCS, instruction);
instruction = *(u32 *)(fw->data + index);
index += 4;
@@ -553,9 +520,9 @@ static int slic_card_download(struct adapter *adapter)
release_firmware(fw);
/* Everything OK, kick off the card */
mdelay(10);
- slic_reg32_write(&slic_regs->slic_wcs, SLIC_WCS_START, FLUSH);
- slic_flush_write(adapter);
+ slic_write32(adapter, SLIC_REG_WCS, SLIC_WCS_START);
+ slic_flush_write(adapter);
/*
* stall for 20 ms, long enough for ucode to init card
* and reach mainloop
@@ -587,21 +554,21 @@ static void slic_adapter_set_hwaddr(struct adapter *adapter)
static void slic_intagg_set(struct adapter *adapter, u32 value)
{
- slic_reg32_write(&adapter->slic_regs->slic_intagg, value, FLUSH);
+ slic_write32(adapter, SLIC_REG_INTAGG, value);
adapter->card->loadlevel_current = value;
}
static void slic_soft_reset(struct adapter *adapter)
{
if (adapter->card->state == CARD_UP) {
- slic_reg32_write(&adapter->slic_regs->slic_quiesce, 0, FLUSH);
+ slic_write32(adapter, SLIC_REG_QUIESCE, 0);
slic_flush_write(adapter);
mdelay(1);
}
- slic_reg32_write(&adapter->slic_regs->slic_reset, SLIC_RESET_MAGIC,
- FLUSH);
+ slic_write32(adapter, SLIC_REG_RESET, SLIC_RESET_MAGIC);
slic_flush_write(adapter);
+
mdelay(1);
}
@@ -609,17 +576,16 @@ static void slic_mac_address_config(struct adapter *adapter)
{
u32 value;
u32 value2;
- __iomem struct slic_regs *slic_regs = adapter->slic_regs;
value = ntohl(*(__be32 *)&adapter->currmacaddr[2]);
- slic_reg32_write(&slic_regs->slic_wraddral, value, FLUSH);
- slic_reg32_write(&slic_regs->slic_wraddrbl, value, FLUSH);
+ slic_write32(adapter, SLIC_REG_WRADDRAL, value);
+ slic_write32(adapter, SLIC_REG_WRADDRBL, value);
value2 = (u32)((adapter->currmacaddr[0] << 8 |
adapter->currmacaddr[1]) & 0xFFFF);
- slic_reg32_write(&slic_regs->slic_wraddrah, value2, FLUSH);
- slic_reg32_write(&slic_regs->slic_wraddrbh, value2, FLUSH);
+ slic_write32(adapter, SLIC_REG_WRADDRAH, value2);
+ slic_write32(adapter, SLIC_REG_WRADDRBH, value2);
/*
* Write our multicast mask out to the card. This is done
@@ -632,7 +598,6 @@ static void slic_mac_address_config(struct adapter *adapter)
static void slic_mac_config(struct adapter *adapter)
{
u32 value;
- __iomem struct slic_regs *slic_regs = adapter->slic_regs;
/* Setup GMAC gaps */
if (adapter->linkspeed == LINK_1000MB) {
@@ -656,7 +621,7 @@ static void slic_mac_config(struct adapter *adapter)
}
/* write mac config */
- slic_reg32_write(&slic_regs->slic_wmcfg, value, FLUSH);
+ slic_write32(adapter, SLIC_REG_WMCFG, value);
/* setup mac addresses */
slic_mac_address_config(adapter);
@@ -666,7 +631,6 @@ static void slic_config_set(struct adapter *adapter, bool linkchange)
{
u32 value;
u32 RcrReset;
- __iomem struct slic_regs *slic_regs = adapter->slic_regs;
if (linkchange) {
/* Setup MAC */
@@ -683,7 +647,7 @@ static void slic_config_set(struct adapter *adapter, bool linkchange)
GXCR_XMTEN | /* Enable transmit */
GXCR_PAUSEEN); /* Enable pause */
- slic_reg32_write(&slic_regs->slic_wxcfg, value, FLUSH);
+ slic_write32(adapter, SLIC_REG_WXCFG, value);
/* Setup rcvcfg last */
value = (RcrReset | /* Reset, if linkchange */
@@ -696,7 +660,7 @@ static void slic_config_set(struct adapter *adapter, bool linkchange)
value = (GXCR_RESET | /* Always reset */
GXCR_XMTEN); /* Enable transmit */
- slic_reg32_write(&slic_regs->slic_wxcfg, value, FLUSH);
+ slic_write32(adapter, SLIC_REG_WXCFG, value);
/* Setup rcvcfg last */
value = (RcrReset | /* Reset, if linkchange */
@@ -713,7 +677,7 @@ static void slic_config_set(struct adapter *adapter, bool linkchange)
if (adapter->macopts & MAC_PROMISC)
value |= GRCR_RCVALL;
- slic_reg32_write(&slic_regs->slic_wrcfg, value, FLUSH);
+ slic_write32(adapter, SLIC_REG_WRCFG, value);
}
/*
@@ -723,24 +687,23 @@ static void slic_config_clear(struct adapter *adapter)
{
u32 value;
u32 phy_config;
- __iomem struct slic_regs *slic_regs = adapter->slic_regs;
/* Setup xmtcfg */
value = (GXCR_RESET | /* Always reset */
GXCR_PAUSEEN); /* Enable pause */
- slic_reg32_write(&slic_regs->slic_wxcfg, value, FLUSH);
+ slic_write32(adapter, SLIC_REG_WXCFG, value);
value = (GRCR_RESET | /* Always reset */
GRCR_CTLEN | /* Enable CTL frames */
GRCR_ADDRAEN | /* Address A enable */
(GRCR_HASHSIZE << GRCR_HASHSIZE_SHIFT));
- slic_reg32_write(&slic_regs->slic_wrcfg, value, FLUSH);
+ slic_write32(adapter, SLIC_REG_WRCFG, value);
/* power down phy */
phy_config = (MIICR_REG_PCR | (PCR_POWERDOWN));
- slic_reg32_write(&slic_regs->slic_wphy, phy_config, FLUSH);
+ slic_write32(adapter, SLIC_REG_WPHY, phy_config);
}
static bool slic_mac_filter(struct adapter *adapter,
@@ -816,13 +779,11 @@ static void slic_timer_load_check(ulong cardaddr)
{
struct sliccard *card = (struct sliccard *)cardaddr;
struct adapter *adapter = card->master;
- u32 __iomem *intagg;
u32 load = card->events;
u32 level = 0;
if ((adapter) && (adapter->state == ADAPT_UP) &&
(card->state == CARD_UP) && (slic_global.dynamic_intagg)) {
- intagg = &adapter->slic_regs->slic_intagg;
if (adapter->devid == SLIC_1GB_DEVICE_ID) {
if (adapter->linkspeed == LINK_1000MB)
level = 100;
@@ -842,7 +803,7 @@ static void slic_timer_load_check(ulong cardaddr)
}
if (card->loadlevel_current != level) {
card->loadlevel_current = level;
- slic_reg32_write(intagg, level, FLUSH);
+ slic_write32(adapter, SLIC_REG_INTAGG, level);
}
} else {
if (load > SLIC_LOAD_5)
@@ -859,7 +820,7 @@ static void slic_timer_load_check(ulong cardaddr)
level = SLIC_INTAGG_0;
if (card->loadlevel_current != level) {
card->loadlevel_current = level;
- slic_reg32_write(intagg, level, FLUSH);
+ slic_write32(adapter, SLIC_REG_INTAGG, level);
}
}
}
@@ -903,7 +864,6 @@ static int slic_upr_queue_request(struct adapter *adapter,
static void slic_upr_start(struct adapter *adapter)
{
struct slic_upr *upr;
- __iomem struct slic_regs *slic_regs = adapter->slic_regs;
upr = adapter->upr_list;
if (!upr)
@@ -915,29 +875,24 @@ static void slic_upr_start(struct adapter *adapter)
switch (upr->upr_request) {
case SLIC_UPR_STATS:
if (upr->upr_data_h == 0) {
- slic_reg32_write(&slic_regs->slic_stats, upr->upr_data,
- FLUSH);
+ slic_write32(adapter, SLIC_REG_RSTAT, upr->upr_data);
} else {
- slic_reg64_write(adapter, &slic_regs->slic_stats64,
- upr->upr_data,
- &slic_regs->slic_addr_upper,
- upr->upr_data_h, FLUSH);
+ slic_write64(adapter, SLIC_REG_RSTAT64, upr->upr_data,
+ upr->upr_data_h);
}
break;
case SLIC_UPR_RLSR:
- slic_reg64_write(adapter, &slic_regs->slic_rlsr, upr->upr_data,
- &slic_regs->slic_addr_upper, upr->upr_data_h,
- FLUSH);
+ slic_write64(adapter, SLIC_REG_LSTAT, upr->upr_data,
+ upr->upr_data_h);
break;
case SLIC_UPR_RCONFIG:
- slic_reg64_write(adapter, &slic_regs->slic_rconfig,
- upr->upr_data, &slic_regs->slic_addr_upper,
- upr->upr_data_h, FLUSH);
+ slic_write64(adapter, SLIC_REG_RCONFIG, upr->upr_data,
+ upr->upr_data_h);
break;
case SLIC_UPR_PING:
- slic_reg32_write(&slic_regs->slic_ping, 1, FLUSH);
+ slic_write32(adapter, SLIC_REG_PING, 1);
break;
}
slic_flush_write(adapter);
@@ -1194,7 +1149,6 @@ static int slic_rspqueue_init(struct adapter *adapter)
{
int i;
struct slic_rspqueue *rspq = &adapter->rspqueue;
- __iomem struct slic_regs *slic_regs = adapter->slic_regs;
u32 paddrh = 0;
memset(rspq, 0, sizeof(struct slic_rspqueue));
@@ -1213,14 +1167,12 @@ static int slic_rspqueue_init(struct adapter *adapter)
}
if (paddrh == 0) {
- slic_reg32_write(&slic_regs->slic_rbar,
- (rspq->paddr[i] | SLIC_RSPQ_BUFSINPAGE),
- DONT_FLUSH);
+ slic_write32(adapter, SLIC_REG_RBAR,
+ rspq->paddr[i] | SLIC_RSPQ_BUFSINPAGE);
} else {
- slic_reg64_write(adapter, &slic_regs->slic_rbar64,
- (rspq->paddr[i] | SLIC_RSPQ_BUFSINPAGE),
- &slic_regs->slic_addr_upper,
- paddrh, DONT_FLUSH);
+ slic_write64(adapter, SLIC_REG_RBAR64,
+ rspq->paddr[i] | SLIC_RSPQ_BUFSINPAGE,
+ paddrh);
}
}
rspq->offset = 0;
@@ -1241,9 +1193,9 @@ static struct slic_rspbuf *slic_rspqueue_getnext(struct adapter *adapter)
if (++rspq->offset < SLIC_RSPQ_BUFSINPAGE) {
rspq->rspbuf++;
} else {
- slic_reg64_write(adapter, &adapter->slic_regs->slic_rbar64,
- (rspq->paddr[rspq->pageindex] | SLIC_RSPQ_BUFSINPAGE),
- &adapter->slic_regs->slic_addr_upper, 0, DONT_FLUSH);
+ slic_write64(adapter, SLIC_REG_RBAR64,
+ rspq->paddr[rspq->pageindex] |
+ SLIC_RSPQ_BUFSINPAGE, 0);
rspq->pageindex = (rspq->pageindex + 1) % rspq->num_pages;
rspq->offset = 0;
rspq->rspbuf = (struct slic_rspbuf *)
@@ -1577,14 +1529,11 @@ retry_rcvqfill:
}
#endif
if (paddrh == 0) {
- slic_reg32_write(&adapter->slic_regs->slic_hbar,
- (u32)paddrl, DONT_FLUSH);
+ slic_write32(adapter, SLIC_REG_HBAR,
+ (u32)paddrl);
} else {
- slic_reg64_write(adapter,
- &adapter->slic_regs->slic_hbar64,
- paddrl,
- &adapter->slic_regs->slic_addr_upper,
- paddrh, DONT_FLUSH);
+ slic_write64(adapter, SLIC_REG_HBAR64, paddrl,
+ paddrh);
}
if (rcvq->head)
rcvq->tail->next = skb;
@@ -1707,12 +1656,9 @@ static u32 slic_rcvqueue_reinsert(struct adapter *adapter, struct sk_buff *skb)
dev_err(dev, " rcvq->count[%x]\n", rcvq->count);
}
if (paddrh == 0) {
- slic_reg32_write(&adapter->slic_regs->slic_hbar, (u32)paddrl,
- DONT_FLUSH);
+ slic_write32(adapter, SLIC_REG_HBAR, (u32)paddrl);
} else {
- slic_reg64_write(adapter, &adapter->slic_regs->slic_hbar64,
- paddrl, &adapter->slic_regs->slic_addr_upper,
- paddrh, DONT_FLUSH);
+ slic_write64(adapter, SLIC_REG_HBAR64, paddrl, paddrh);
}
if (rcvq->head)
rcvq->tail->next = skb;
@@ -2158,9 +2104,9 @@ static irqreturn_t slic_interrupt(int irq, void *dev_id)
u32 isr;
if ((adapter->pshmem) && (adapter->pshmem->isr)) {
- slic_reg32_write(&adapter->slic_regs->slic_icr,
- ICR_INT_MASK, FLUSH);
+ slic_write32(adapter, SLIC_REG_ICR, ICR_INT_MASK);
slic_flush_write(adapter);
+
isr = adapter->isrcopy = adapter->pshmem->isr;
adapter->pshmem->isr = 0;
adapter->num_isrs++;
@@ -2181,7 +2127,7 @@ static irqreturn_t slic_interrupt(int irq, void *dev_id)
adapter->isrcopy = 0;
adapter->all_reg_writes += 2;
adapter->isr_reg_writes++;
- slic_reg32_write(&adapter->slic_regs->slic_isr, 0, FLUSH);
+ slic_write32(adapter, SLIC_REG_ISR, 0);
} else {
adapter->false_interrupts++;
}
@@ -2233,13 +2179,11 @@ static netdev_tx_t slic_xmit_start(struct sk_buff *skb, struct net_device *dev)
}
#endif
if (hcmd->paddrh == 0) {
- slic_reg32_write(&adapter->slic_regs->slic_cbar,
- (hcmd->paddrl | hcmd->cmdsize), DONT_FLUSH);
+ slic_write32(adapter, SLIC_REG_CBAR, (hcmd->paddrl |
+ hcmd->cmdsize));
} else {
- slic_reg64_write(adapter, &adapter->slic_regs->slic_cbar64,
- (hcmd->paddrl | hcmd->cmdsize),
- &adapter->slic_regs->slic_addr_upper,
- hcmd->paddrh, DONT_FLUSH);
+ slic_write64(adapter, SLIC_REG_CBAR64,
+ hcmd->paddrl | hcmd->cmdsize, hcmd->paddrh);
}
xmit_done:
return NETDEV_TX_OK;
@@ -2299,7 +2243,6 @@ static int slic_if_init(struct adapter *adapter, unsigned long *flags)
{
struct sliccard *card = adapter->card;
struct net_device *dev = adapter->netdev;
- __iomem struct slic_regs *slic_regs = adapter->slic_regs;
struct slic_shmem *pshmem;
int rc;
@@ -2344,7 +2287,7 @@ static int slic_if_init(struct adapter *adapter, unsigned long *flags)
adapter->queues_initialized = 1;
}
- slic_reg32_write(&slic_regs->slic_icr, ICR_INT_OFF, FLUSH);
+ slic_write32(adapter, SLIC_REG_ICR, ICR_INT_OFF);
slic_flush_write(adapter);
mdelay(1);
@@ -2357,14 +2300,13 @@ static int slic_if_init(struct adapter *adapter, unsigned long *flags)
spin_lock_irqsave(&adapter->bit64reglock, flags);
#if BITS_PER_LONG == 64
- slic_reg32_write(&slic_regs->slic_addr_upper,
- SLIC_GET_ADDR_HIGH(&pshmem->isr), DONT_FLUSH);
- slic_reg32_write(&slic_regs->slic_isp,
- SLIC_GET_ADDR_LOW(&pshmem->isr), FLUSH);
+ slic_write32(adapter, SLIC_REG_ADDR_UPPER,
+ SLIC_GET_ADDR_HIGH(&pshmem->isr));
+ slic_write32(adapter, SLIC_REG_ISP,
+ SLIC_GET_ADDR_LOW(&pshmem->isr));
#else
- slic_reg32_write(&slic_regs->slic_addr_upper, 0, DONT_FLUSH);
- slic_reg32_write(&slic_regs->slic_isp, (u32)&pshmem->isr,
- FLUSH);
+ slic_write32(adapter, SLIC_REG_ADDR_UPPER, 0);
+ slic_write32(adapter, SLIC_REG_ISP, (u32)&pshmem->isr);
#endif
spin_unlock_irqrestore(&adapter->bit64reglock, flags);
adapter->isp_initialized = 1;
@@ -2395,17 +2337,19 @@ static int slic_if_init(struct adapter *adapter, unsigned long *flags)
*/
adapter->isrcopy = 0;
adapter->pshmem->isr = 0;
- slic_reg32_write(&slic_regs->slic_isr, 0, FLUSH);
- slic_reg32_write(&slic_regs->slic_icr, ICR_INT_ON, FLUSH);
+ slic_write32(adapter, SLIC_REG_ISR, 0);
+ slic_write32(adapter, SLIC_REG_ICR, ICR_INT_ON);
slic_link_config(adapter, LINK_AUTOSPEED, LINK_AUTOD);
slic_flush_write(adapter);
+
rc = slic_link_event_handler(adapter);
if (rc) {
/* disable interrupts then clear pending events */
- slic_reg32_write(&slic_regs->slic_icr, ICR_INT_OFF, FLUSH);
- slic_reg32_write(&slic_regs->slic_isr, 0, FLUSH);
+ slic_write32(adapter, SLIC_REG_ICR, ICR_INT_OFF);
+ slic_write32(adapter, SLIC_REG_ISR, 0);
slic_flush_write(adapter);
+
if (adapter->pingtimerset) {
del_timer(&adapter->pingtimer);
adapter->pingtimerset = 0;
@@ -2478,7 +2422,7 @@ static void slic_entry_remove(struct pci_dev *pcidev)
unregister_netdev(dev);
slic_adapter_freeresources(adapter);
- slic_unmap_mmio_space(adapter);
+ iounmap(adapter->regs);
/* free multicast addresses */
mlist = adapter->mcastaddrs;
@@ -2512,7 +2456,6 @@ static int slic_entry_halt(struct net_device *dev)
{
struct adapter *adapter = netdev_priv(dev);
struct sliccard *card = adapter->card;
- __iomem struct slic_regs *slic_regs = adapter->slic_regs;
unsigned long flags;
spin_lock_irqsave(&slic_global.driver_lock, flags);
@@ -2522,7 +2465,7 @@ static int slic_entry_halt(struct net_device *dev)
adapter->upr_list = NULL;
adapter->upr_busy = 0;
adapter->devflags_prev = 0;
- slic_reg32_write(&slic_regs->slic_icr, ICR_INT_OFF, FLUSH);
+ slic_write32(adapter, SLIC_REG_ICR, ICR_INT_OFF);
adapter->all_reg_writes++;
adapter->icr_reg_writes++;
slic_config_clear(adapter);
@@ -2532,9 +2475,10 @@ static int slic_entry_halt(struct net_device *dev)
adapter->activated = 0;
}
#ifdef AUTOMATIC_RESET
- slic_reg32_write(&slic_regs->slic_reset_iface, 0, FLUSH);
+ slic_write32(adapter, SLIC_REG_RESET_IFACE, 0);
#endif
slic_flush_write(adapter);
+
/*
* Reset the adapter's cmd queues
*/
@@ -2680,7 +2624,6 @@ static void slic_config_pci(struct pci_dev *pcidev)
static int slic_card_init(struct sliccard *card, struct adapter *adapter)
{
- __iomem struct slic_regs *slic_regs = adapter->slic_regs;
struct slic_eeprom *peeprom;
struct oslic_eeprom *pOeeprom;
dma_addr_t phys_config;
@@ -2725,17 +2668,17 @@ static int slic_card_init(struct sliccard *card, struct adapter *adapter)
memset(peeprom, 0, sizeof(struct slic_eeprom));
- slic_reg32_write(&slic_regs->slic_icr, ICR_INT_OFF, FLUSH);
+ slic_write32(adapter, SLIC_REG_ICR, ICR_INT_OFF);
slic_flush_write(adapter);
mdelay(1);
pshmem = (struct slic_shmem *)(unsigned long)
adapter->phys_shmem;
spin_lock_irqsave(&adapter->bit64reglock, flags);
- slic_reg32_write(&slic_regs->slic_addr_upper,
- SLIC_GET_ADDR_HIGH(&pshmem->isr), DONT_FLUSH);
- slic_reg32_write(&slic_regs->slic_isp,
- SLIC_GET_ADDR_LOW(&pshmem->isr), FLUSH);
+ slic_write32(adapter, SLIC_REG_ADDR_UPPER,
+ SLIC_GET_ADDR_HIGH(&pshmem->isr));
+ slic_write32(adapter, SLIC_REG_ISP,
+ SLIC_GET_ADDR_LOW(&pshmem->isr));
spin_unlock_irqrestore(&adapter->bit64reglock, flags);
status = slic_config_get(adapter, phys_configl, phys_configh);
@@ -2749,12 +2692,9 @@ static int slic_card_init(struct sliccard *card, struct adapter *adapter)
if (adapter->pshmem->isr) {
if (adapter->pshmem->isr & ISR_UPC) {
adapter->pshmem->isr = 0;
- slic_reg64_write(adapter,
- &slic_regs->slic_isp, 0,
- &slic_regs->slic_addr_upper,
- 0, FLUSH);
- slic_reg32_write(&slic_regs->slic_isr,
- 0, FLUSH);
+ slic_write64(adapter, SLIC_REG_ISP, 0,
+ 0);
+ slic_write32(adapter, SLIC_REG_ISR, 0);
slic_flush_write(adapter);
slic_upr_request_complete(adapter, 0);
@@ -2762,8 +2702,7 @@ static int slic_card_init(struct sliccard *card, struct adapter *adapter)
}
adapter->pshmem->isr = 0;
- slic_reg32_write(&slic_regs->slic_isr,
- 0, FLUSH);
+ slic_write32(adapter, SLIC_REG_ISR, 0);
slic_flush_write(adapter);
} else {
mdelay(1);
@@ -2771,11 +2710,10 @@ static int slic_card_init(struct sliccard *card, struct adapter *adapter)
if (i > 5000) {
dev_err(&adapter->pcidev->dev,
"Fetch of config data timed out.\n");
- slic_reg64_write(adapter,
- &slic_regs->slic_isp, 0,
- &slic_regs->slic_addr_upper,
- 0, FLUSH);
+ slic_write64(adapter, SLIC_REG_ISP,
+ 0, 0);
slic_flush_write(adapter);
+
status = -EINVAL;
goto card_init_err;
}
@@ -2853,9 +2791,7 @@ static int slic_card_init(struct sliccard *card, struct adapter *adapter)
peeprom, phys_config);
if (!card->config.EepromValid) {
- slic_reg64_write(adapter, &slic_regs->slic_isp, 0,
- &slic_regs->slic_addr_upper,
- 0, FLUSH);
+ slic_write64(adapter, SLIC_REG_ISP, 0, 0);
slic_flush_write(adapter);
dev_err(&adapter->pcidev->dev, "EEPROM invalid.\n");
return -EINVAL;
@@ -2936,7 +2872,6 @@ static int slic_init_adapter(struct net_device *netdev,
adapter->busnumber = pcidev->bus->number;
adapter->slotnumber = ((pcidev->devfn >> 3) & 0x1F);
adapter->functionnumber = (pcidev->devfn & 0x7);
- adapter->slic_regs = memaddr;
adapter->regs = memaddr;
adapter->irq = pcidev->irq;
adapter->chipid = chip_idx;
@@ -2989,27 +2924,9 @@ static u32 slic_card_locate(struct adapter *adapter)
struct sliccard *card = slic_global.slic_card;
struct physcard *physcard = slic_global.phys_card;
ushort card_hostid;
- u16 __iomem *hostid_reg;
uint i;
- uint rdhostid_offset = 0;
-
- switch (adapter->devid) {
- case SLIC_2GB_DEVICE_ID:
- rdhostid_offset = SLIC_RDHOSTID_2GB;
- break;
- case SLIC_1GB_DEVICE_ID:
- rdhostid_offset = SLIC_RDHOSTID_1GB;
- break;
- default:
- return -ENODEV;
- }
-
- hostid_reg =
- (u16 __iomem *)(((u8 __iomem *)(adapter->slic_regs)) +
- rdhostid_offset);
- /* read the 16 bit hostid from SRAM */
- card_hostid = (ushort)readw(hostid_reg);
+ card_hostid = slic_read32(adapter, SLIC_REG_HOSTID);
/* Initialize a new card structure if need be */
if (card_hostid == SLIC_HOSTID_DEFAULT) {
--
1.9.1
Powered by blists - more mailing lists