| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sun, 24 Jul 2016 00:49:08 +0300
From: Aleksei Mamlin <mamlinav@...il.com>
To: Peter Meerwald-Stadler <pmeerw@...erw.net>
Cc: Jonathan Cameron <jic23@...nel.org>,
Hartmut Knaack <knaack.h@....de>,
Lars-Peter Clausen <lars@...afoo.de>,
Rob Herring <robh+dt@...nel.org>, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-iio@...r.kernel.org
Subject: Re: [PATCH 2/2] iio: accel: Add support for Domintech DMARD06
accelerometer
On Fri, 22 Jul 2016 00:41:39 +0200 (CEST)
Peter Meerwald-Stadler <pmeerw@...erw.net> wrote:
>
> > This patch add support for Domintech DMARD06 accelerometer.
>
> comments below
>
> > Domintech DMARD06 is a low-g tri-axial digital accelerometer for
> > cost-sensitive consumer application.
> >
> > Signed-off-by: Aleksei Mamlin <mamlinav@...il.com>
> > ---
> > .../devicetree/bindings/iio/accel/dmard06.txt | 17 ++
> > drivers/iio/accel/Kconfig | 11 ++
> > drivers/iio/accel/Makefile | 1 +
> > drivers/iio/accel/dmard06.c | 219 +++++++++++++++++++++
> > 4 files changed, 248 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/iio/accel/dmard06.txt
> > create mode 100644 drivers/iio/accel/dmard06.c
> >
> > diff --git a/Documentation/devicetree/bindings/iio/accel/dmard06.txt b/Documentation/devicetree/bindings/iio/accel/dmard06.txt
> > new file mode 100644
> > index 0000000..cc2231a
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/iio/accel/dmard06.txt
> > @@ -0,0 +1,17 @@
> > +Device tree bindings for Domintech DMARD06 acceletometer
>
> typo: accelerometer
>
> > +
> > +Required properties:
> > + - compatible : Should be "domintech,dmard06"
> > + - reg : I2C address of the chip. Should be 0x1c
> > +
> > +Example:
> > + &i2c1 {
> > + /* ... */
> > +
> > + accelerometer@1c {
> > + compatible = "domintech,dmard06";
> > + reg = <0x1c>;
> > + };
> > +
> > + /* ... */
> > + };
> > diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
> > index e4a758c..abc8536 100644
> > --- a/drivers/iio/accel/Kconfig
> > +++ b/drivers/iio/accel/Kconfig
> > @@ -40,6 +40,17 @@ config BMC150_ACCEL_SPI
> > tristate
> > select REGMAP_SPI
> >
> > +config DMARD06
> > + tristate "Domintech DMARD06 Digital Accelerometer Driver"
> > + depends on OF || COMPILE_TEST
> > + depends on I2C
> > + help
> > + Say yes here to build support for the Domintech DMARD06 low-g
> > + tri-axial digital accelerometer connected via an I2C bus.
> > +
> > + To compile this driver as a module, choose M here: the
> > + module will be called dmard06.
> > +
> > config HID_SENSOR_ACCEL_3D
> > depends on HID_SENSOR_HUB
> > select IIO_BUFFER
> > diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile
> > index 71b6794..a96b269 100644
> > --- a/drivers/iio/accel/Makefile
> > +++ b/drivers/iio/accel/Makefile
> > @@ -7,6 +7,7 @@ obj-$(CONFIG_BMA180) += bma180.o
> > obj-$(CONFIG_BMC150_ACCEL) += bmc150-accel-core.o
> > obj-$(CONFIG_BMC150_ACCEL_I2C) += bmc150-accel-i2c.o
> > obj-$(CONFIG_BMC150_ACCEL_SPI) += bmc150-accel-spi.o
> > +obj-$(CONFIG_DMARD06) += dmard06.o
> > obj-$(CONFIG_HID_SENSOR_ACCEL_3D) += hid-sensor-accel-3d.o
> > obj-$(CONFIG_KXCJK1013) += kxcjk-1013.o
> > obj-$(CONFIG_KXSD9) += kxsd9.o
> > diff --git a/drivers/iio/accel/dmard06.c b/drivers/iio/accel/dmard06.c
> > new file mode 100644
> > index 0000000..433e430
> > --- /dev/null
> > +++ b/drivers/iio/accel/dmard06.c
> > @@ -0,0 +1,219 @@
> > +/*
> > + * IIO driver for Domintech DMARD06 accelerometer
> > + *
> > + * Copyright (C) 2016 Aleksei Mamlin <mamlinav@...il.com>
> > + *
> > + * This program is free software; you can redistribute it and/or modify it
> > + * under the terms and conditions of the GNU General Public License,
> > + * version 2, as published by the Free Software Foundation.
> > + */
> > +
> > +#include <linux/module.h>
> > +#include <linux/i2c.h>
> > +#include <linux/iio/iio.h>
> > +
> > +struct dmard06_data {
> > + struct i2c_client *client;
> > +};
> > +
> > +#define DMARD06_DRV_NAME "dmard06"
> > +
> > +/* Device data registers */
> > +#define DMARD06_CHIP_ID_REG 0x0f
> > +#define DMARD06_TOUT_REG 0x40
> > +#define DMARD06_XOUT_REG 0x41
> > +#define DMARD06_YOUT_REG 0x42
> > +#define DMARD06_ZOUT_REG 0x43
> > +
> > +/* Device ID value */
> > +#define DMARD06_CHIP_ID 0x06
> > +
> > +/* Device values */
> > +#define DMARD06_AXIS_MAX_VAL 64
> > +#define DMARD06_AXIS_SCALE_VAL 31250
> > +#define DMARD06_TEMP_CENTER_VAL 25
> > +
> > +static int dmard06_i2c_read(struct i2c_client *client, u8 reg, u8 *buf)
> > +{
> > + int error;
>
> 'error' is a bit pessimistic, how about 'ret'? :-)
>
> > +
>
> can't use i2c_smbus_read_byte_data()?
>
I'll use it in next patch version
>
> > + error = i2c_master_send(client, ®, 1);
> > + if (unlikely(error < 0))
> > + return error;
> > +
> > + error = i2c_master_recv(client, buf, 1);
> > + if (unlikely(error < 0))
> > + return error;
>
> not sure if it is worth to annotate unlikely() here -- i2c is slooow
> locking is needed if you really need two i2c_master calls
>
> > + return 0;
> > +}
> > +
> > +static int dmard06_read_chip_id(struct dmard06_data *dmard06)
> > +{
> > + u8 buf;
> > + u8 chip_id;
> > + int error;
> > +
> > + error = dmard06_i2c_read(dmard06->client, DMARD06_CHIP_ID_REG, &buf);
> > + if (error) {
> > + dev_err(&dmard06->client->dev, "Failed to read chip id: %d\n",
> > + error);
> > + return error;
> > + }
> > +
> > + chip_id = (buf & 0x00ff);
>
> why? buf is u8 anyways
>
> > + if (chip_id != DMARD06_CHIP_ID) {
> > + dev_err(&dmard06->client->dev, "Invalid chip id: %02x\n",
> > + chip_id);
> > + return -EINVAL;
>
> often ENODEV is used for this case
>
> > + }
> > +
> > + dev_info(&dmard06->client->dev, "Found DMARD%02x chip\n", chip_id);
>
> we prefer silent probing of the driver, please don't clutter the log
>
> > +
> > + return 0;
> > +}
> > +
> > +static int dmard06_read_raw(struct iio_dev *indio_dev,
> > + struct iio_chan_spec const *chan,
> > + int *val, int *val2, long mask)
> > +{
> > + struct dmard06_data *dmard06 = iio_priv(indio_dev);
> > + u8 buf;
> > + bool reversed;
> > + int error;
> > + int tmp;
> > +
> > + switch (mask) {
> > + case IIO_CHAN_INFO_RAW:
> > + error = dmard06_i2c_read(dmard06->client, chan->address, &buf);
> > + if (error) {
> > + dev_err(&dmard06->client->dev,
> > + "Failed to read data %d\n", error);
> > + return error;
> > + }
> > +
> > + reversed = (buf >> 7) & 1;
> > + tmp = (int)((buf & 0x7f) >> 1);
>
>
> > +
> > + switch (chan->type) {
> > + case IIO_ACCEL:
>
> wouldn't sign_extend32(buf >> 1, 6) do the job?
>
You are right, this do the job for axis and temperature. Thanks
>
> > + *val = reversed ? (tmp - DMARD06_AXIS_MAX_VAL) : tmp;
> > + return IIO_VAL_INT;
> > + case IIO_TEMP:
> > + *val = reversed ? -tmp : tmp;
> > + return IIO_VAL_INT;
> > + default:
> > + return -EINVAL;
> > + }
> > + case IIO_CHAN_INFO_OFFSET:
> > + switch (chan->type) {
> > + case IIO_TEMP:
> > + *val = DMARD06_TEMP_CENTER_VAL;
> > + return IIO_VAL_INT;
> > + default:
> > + return -EINVAL;
> > + }
> > + case IIO_CHAN_INFO_SCALE:
> > + switch (chan->type) {
> > + case IIO_ACCEL:
> > + *val = 0;
> > + *val2 = DMARD06_AXIS_SCALE_VAL;
> > + return IIO_VAL_INT_PLUS_MICRO;
> > + default:
> > + return -EINVAL;
> > + }
> > + default:
> > + return -EINVAL;
> > + }
> > +}
> > +
> > +static const struct iio_info dmard06_info = {
> > + .driver_module = THIS_MODULE,
> > + .read_raw = dmard06_read_raw,
> > +};
> > +
> > +#define DMARD06_ACCEL_CHANNEL(_axis, reg) { \
>
> maybe rename reg to _reg
>
> > + .type = IIO_ACCEL, \
> > + .address = reg, \
> > + .channel2 = IIO_MOD_##_axis, \
> > + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
> > + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
> > + .modified = 1, \
> > +}
> > +
> > +#define DMARD06_TEMP_CHANNEL(reg) { \
> > + .type = IIO_TEMP, \
> > + .address = reg, \
> > + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
> > + BIT(IIO_CHAN_INFO_OFFSET), \
> > +}
> > +
> > +static const struct iio_chan_spec dmard06_channels[] = {
> > + DMARD06_ACCEL_CHANNEL(X, DMARD06_XOUT_REG),
> > + DMARD06_ACCEL_CHANNEL(Y, DMARD06_YOUT_REG),
> > + DMARD06_ACCEL_CHANNEL(Z, DMARD06_ZOUT_REG),
> > + DMARD06_TEMP_CHANNEL(DMARD06_TOUT_REG),
> > +};
> > +
> > +static int dmard06_probe(struct i2c_client *client,
> > + const struct i2c_device_id *id)
> > +{
> > + int error;
> > + struct iio_dev *indio_dev;
> > + struct dmard06_data *dmard06;
> > +
> > + dev_dbg(&client->dev, "I2C Address: 0x%02x\n", client->addr);
>
> not needed
>
> > +
> > + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
> > + dev_err(&client->dev, "I2C check functionality failed\n");
> > + return -ENXIO;
> > + }
> > +
> > + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*dmard06));
> > + if (!indio_dev) {
> > + dev_err(&client->dev, "Failed to allocate iio device\n");
> > + return -ENOMEM;
> > + }
> > +
> > + dmard06 = iio_priv(indio_dev);
> > + dmard06->client = client;
> > +
> > + error = dmard06_read_chip_id(dmard06);
> > + if (error)
> > + return error;
> > +
> > + i2c_set_clientdata(client, indio_dev);
> > + indio_dev->dev.parent = &client->dev;
> > + indio_dev->name = DMARD06_DRV_NAME;
> > + indio_dev->modes = INDIO_DIRECT_MODE;
> > + indio_dev->channels = dmard06_channels;
> > + indio_dev->num_channels = ARRAY_SIZE(dmard06_channels);
> > + indio_dev->info = &dmard06_info;
> > +
> > + return devm_iio_device_register(&client->dev, indio_dev);
> > +}
> > +
> > +static const struct i2c_device_id dmard06_id[] = {
> > + { "dmard06", 0 },
> > + { }
> > +};
> > +MODULE_DEVICE_TABLE(i2c, dmard06_id);
> > +
> > +static const struct of_device_id dmard06_of_match[] = {
> > + { .compatible = "domintech,dmard06" },
> > + { }
> > +};
> > +MODULE_DEVICE_TABLE(of, dmard06_of_match);
> > +
> > +static struct i2c_driver dmard06_driver = {
> > + .probe = dmard06_probe,
> > + .id_table = dmard06_id,
> > + .driver = {
> > + .name = DMARD06_DRV_NAME,
> > + .of_match_table = of_match_ptr(dmard06_of_match),
> > + },
> > +};
> > +module_i2c_driver(dmard06_driver);
> > +
> > +MODULE_AUTHOR("Aleksei Mamlin <mamlinav@...il.com>");
> > +MODULE_DESCRIPTION("Domintech DMARD06 accelerometer driver");
> > +MODULE_LICENSE("GPL v2");
> >
>
> --
>
> Peter Meerwald-Stadler
> +43-664-2444418 (mobile)
--
Thanks and regards,
Aleksei Mamlin
Powered by blists - more mailing lists