| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <146933800882.26196.8524369982325500693.stgit@dwillia2-desk3.amr.corp.intel.com>
Date: Sat, 23 Jul 2016 22:26:48 -0700
From: Dan Williams <dan.j.williams@...el.com>
To: linux-nvdimm@...ts.01.org
Cc: linux-acpi@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH v4 3/4] nfit: move to nfit/ sub-directory
With the arrival of x86-machine-check support the nfit driver will add a
(conditionally-compiled) source file. Prepare for this by moving all
nfit source to drivers/acpi/nfit/. This is pure code movement, no
functional changes.
Signed-off-by: Dan Williams <dan.j.williams@...el.com>
---
drivers/acpi/Kconfig | 27 +--------------------------
drivers/acpi/Makefile | 2 +-
drivers/acpi/nfit/Kconfig | 26 ++++++++++++++++++++++++++
drivers/acpi/nfit/Makefile | 2 ++
drivers/acpi/nfit/core.c | 0
drivers/acpi/nfit/nfit.h | 0
tools/testing/nvdimm/Kbuild | 4 ++--
tools/testing/nvdimm/test/Kbuild | 2 +-
8 files changed, 33 insertions(+), 30 deletions(-)
create mode 100644 drivers/acpi/nfit/Kconfig
create mode 100644 drivers/acpi/nfit/Makefile
rename drivers/acpi/{nfit.c => nfit/core.c} (100%)
rename drivers/acpi/{nfit.h => nfit/nfit.h} (100%)
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index b7e2e776397d..415b148a8698 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -447,32 +447,7 @@ config ACPI_REDUCED_HARDWARE_ONLY
If you are unsure what to do, do not enable this option.
-config ACPI_NFIT
- tristate "ACPI NVDIMM Firmware Interface Table (NFIT)"
- depends on PHYS_ADDR_T_64BIT
- depends on BLK_DEV
- depends on ARCH_HAS_MMIO_FLUSH
- select LIBNVDIMM
- help
- Infrastructure to probe ACPI 6 compliant platforms for
- NVDIMMs (NFIT) and register a libnvdimm device tree. In
- addition to storage devices this also enables libnvdimm to pass
- ACPI._DSM messages for platform/dimm configuration.
-
- To compile this driver as a module, choose M here:
- the module will be called nfit.
-
-config ACPI_NFIT_DEBUG
- bool "NFIT DSM debug"
- depends on ACPI_NFIT
- depends on DYNAMIC_DEBUG
- default n
- help
- Enabling this option causes the nfit driver to dump the
- input and output buffers of _DSM operations on the ACPI0012
- device and its children. This can be very verbose, so leave
- it disabled unless you are debugging a hardware / firmware
- issue.
+source "drivers/acpi/nfit/Kconfig"
source "drivers/acpi/apei/Kconfig"
diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
index 251ce85a66fb..64a575a6f7ef 100644
--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@@ -70,7 +70,7 @@ obj-$(CONFIG_ACPI_PCI_SLOT) += pci_slot.o
obj-$(CONFIG_ACPI_PROCESSOR) += processor.o
obj-$(CONFIG_ACPI) += container.o
obj-$(CONFIG_ACPI_THERMAL) += thermal.o
-obj-$(CONFIG_ACPI_NFIT) += nfit.o
+obj-$(CONFIG_ACPI_NFIT) += nfit/
obj-$(CONFIG_ACPI) += acpi_memhotplug.o
obj-$(CONFIG_ACPI_HOTPLUG_IOAPIC) += ioapic.o
obj-$(CONFIG_ACPI_BATTERY) += battery.o
diff --git a/drivers/acpi/nfit/Kconfig b/drivers/acpi/nfit/Kconfig
new file mode 100644
index 000000000000..dd0d53c52552
--- /dev/null
+++ b/drivers/acpi/nfit/Kconfig
@@ -0,0 +1,26 @@
+config ACPI_NFIT
+ tristate "ACPI NVDIMM Firmware Interface Table (NFIT)"
+ depends on PHYS_ADDR_T_64BIT
+ depends on BLK_DEV
+ depends on ARCH_HAS_MMIO_FLUSH
+ select LIBNVDIMM
+ help
+ Infrastructure to probe ACPI 6 compliant platforms for
+ NVDIMMs (NFIT) and register a libnvdimm device tree. In
+ addition to storage devices this also enables libnvdimm to pass
+ ACPI._DSM messages for platform/dimm configuration.
+
+ To compile this driver as a module, choose M here:
+ the module will be called nfit.
+
+config ACPI_NFIT_DEBUG
+ bool "NFIT DSM debug"
+ depends on ACPI_NFIT
+ depends on DYNAMIC_DEBUG
+ default n
+ help
+ Enabling this option causes the nfit driver to dump the
+ input and output buffers of _DSM operations on the ACPI0012
+ device and its children. This can be very verbose, so leave
+ it disabled unless you are debugging a hardware / firmware
+ issue.
diff --git a/drivers/acpi/nfit/Makefile b/drivers/acpi/nfit/Makefile
new file mode 100644
index 000000000000..eb95c5aff83b
--- /dev/null
+++ b/drivers/acpi/nfit/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_ACPI_NFIT) := nfit.o
+nfit-y := core.o
diff --git a/drivers/acpi/nfit.c b/drivers/acpi/nfit/core.c
similarity index 100%
rename from drivers/acpi/nfit.c
rename to drivers/acpi/nfit/core.c
diff --git a/drivers/acpi/nfit.h b/drivers/acpi/nfit/nfit.h
similarity index 100%
rename from drivers/acpi/nfit.h
rename to drivers/acpi/nfit/nfit.h
diff --git a/tools/testing/nvdimm/Kbuild b/tools/testing/nvdimm/Kbuild
index 62d5ac3c988e..0dca8ff7557b 100644
--- a/tools/testing/nvdimm/Kbuild
+++ b/tools/testing/nvdimm/Kbuild
@@ -16,7 +16,7 @@ ldflags-y += --wrap=remove_resource
DRIVERS := ../../../drivers
NVDIMM_SRC := $(DRIVERS)/nvdimm
-ACPI_SRC := $(DRIVERS)/acpi
+ACPI_SRC := $(DRIVERS)/acpi/nfit
DAX_SRC := $(DRIVERS)/dax
ccflags-y := -I$(src)/$(NVDIMM_SRC)/
@@ -29,7 +29,7 @@ obj-$(CONFIG_ACPI_NFIT) += nfit.o
obj-$(CONFIG_DEV_DAX) += dax.o
obj-$(CONFIG_DEV_DAX_PMEM) += dax_pmem.o
-nfit-y := $(ACPI_SRC)/nfit.o
+nfit-y := $(ACPI_SRC)/core.o
nfit-y += config_check.o
nd_pmem-y := $(NVDIMM_SRC)/pmem.o
diff --git a/tools/testing/nvdimm/test/Kbuild b/tools/testing/nvdimm/test/Kbuild
index 9241064970fe..d32f25bba42a 100644
--- a/tools/testing/nvdimm/test/Kbuild
+++ b/tools/testing/nvdimm/test/Kbuild
@@ -1,5 +1,5 @@
ccflags-y := -I$(src)/../../../../drivers/nvdimm/
-ccflags-y += -I$(src)/../../../../drivers/acpi/
+ccflags-y += -I$(src)/../../../../drivers/acpi/nfit/
obj-m += nfit_test.o
obj-m += nfit_test_iomap.o
Powered by blists - more mailing lists