linux-kernel - Re: linux-next: manual merge of the pwm tree with the regulator tree

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20160725082906.GA4667@ulmo.ba.sec>
Date:	Mon, 25 Jul 2016 10:29:06 +0200
From:	Thierry Reding <thierry.reding@...il.com>
To:	Doug Anderson <dianders@...omium.org>
Cc:	Stephen Rothwell <sfr@...b.auug.org.au>,
	Mark Brown <broonie@...nel.org>,
	Liam Girdwood <lgirdwood@...il.com>,
	"linux-next@...r.kernel.org" <linux-next@...r.kernel.org>,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
	Boris Brezillon <boris.brezillon@...e-electrons.com>,
	Alexandre Courbot <acourbot@...dia.com>
Subject: Re: linux-next: manual merge of the pwm tree with the regulator tree

On Mon, Jul 11, 2016 at 11:39:00PM +0200, Thierry Reding wrote:
> On Mon, Jul 11, 2016 at 11:30:59PM +0200, Thierry Reding wrote:
> > On Mon, Jul 11, 2016 at 09:47:34AM -0700, Doug Anderson wrote:
> > > Hi,
> > > 
> > > On Sun, Jul 10, 2016 at 11:56 PM, Stephen Rothwell <sfr@...b.auug.org.au> wrote:
> > > > Hi Thierry,
> > > >
> > > > Today's linux-next merge of the pwm tree got a conflict in:
> > > >
> > > >   drivers/regulator/pwm-regulator.c
> > > >
> > > > between commit:
> > > >
> > > >   830583004e61 ("regulator: pwm: Drop unneeded pwm_enable() call")
> > > >   27bfa8893b15 ("regulator: pwm: Support for enable GPIO")
> > > >   c2588393e631 ("regulator: pwm: Fix regulator ramp delay for continuous mode")
> > > >
> > > > from the regulator tree and commit:
> > > >
> > > >   b0303deaa480 ("regulator: pwm: Adjust PWM config at probe time")
> > > >   8bd57ca236d0 ("regulator: pwm: Switch to the atomic PWM API")
> > > >   25d16595935b ("regulator: pwm: Retrieve correct voltage")
> > > >   53f239af4c14 ("regulator: pwm: Support extra continuous mode cases")
> > > >
> > > > from the pwm tree.
> > > >
> > > > I fixed it up (I think, please check - see below) and can carry the fix
> > > > as necessary. This is now fixed as far as linux-next is concerned, but
> > > > any non trivial conflicts should be mentioned to your upstream maintainer
> > > > when your tree is submitted for merging.  You may also want to consider
> > > > cooperating with the maintainer of the conflicting tree to minimise any
> > > > particularly complex conflicts.
> > > >
> > > > --
> > > > Cheers,
> > > > Stephen Rothwell
> > > 
> > > [ cut ]
> > > 
> > > >  -      /* Delay required by PWM regulator to settle to the new voltage */
> > > >  -      usleep_range(ramp_delay, ramp_delay + 1000);
> > > >  +      /* Ramp delay is in uV/uS. Adjust to uS and delay */
> > > >  +      ramp_delay = DIV_ROUND_UP(abs(min_uV - old_uV), ramp_delay);
> > > 
> > > This was what I was worried about and why I originally sent my patch
> > > based upon Boris's series.  The above should be:
> > > 
> > > ramp_delay = DIV_ROUND_UP(abs(req_min_uV - old_uV), ramp_delay);
> > > 
> > > Specifically note the use of "req_min_uV" and not "min_uV".
> > 
> > Okay, so this is something that needs to be fixed up in one of Boris'
> > patches? Can you help point out where exactly? The conflict should be
> > gone as of tomorrow's linux-next.
> 
> Looks like the below should be squashed into commit:
> 
> 	4585082afab4 regulator: pwm: Support extra continuous mode cases
> 
> Can you confirm?
> 
> Thierry
> 
> --- >8 ---
> diff --git a/drivers/regulator/pwm-regulator.c b/drivers/regulator/pwm-regulator.c
> index 263a2d16d909..c24524242da2 100644
> --- a/drivers/regulator/pwm-regulator.c
> +++ b/drivers/regulator/pwm-regulator.c
> @@ -237,7 +237,7 @@ static int pwm_regulator_set_voltage(struct regulator_dev *rdev,
>  		return 0;
>  
>  	/* Ramp delay is in uV/uS. Adjust to uS and delay */
> -	ramp_delay = DIV_ROUND_UP(abs(min_uV - old_uV), ramp_delay);
> +	ramp_delay = DIV_ROUND_UP(abs(req_min_uV - old_uV), ramp_delay);
>  	usleep_range(ramp_delay, ramp_delay + DIV_ROUND_UP(ramp_delay, 10));
>  
>  	return 0;

Doug? Can you confirm?

Thierry

Download attachment "signature.asc" of type "application/pgp-signature" (820 bytes)