| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20160725203430.900008786@linuxfoundation.org>
Date: Mon, 25 Jul 2016 13:54:15 -0700
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org, Johan Hovold <johan@...nel.org>,
Linus Walleij <linus.walleij@...aro.org>
Subject: [PATCH 4.6 040/203] Revert "gpiolib: Split GPIO flags parsing and GPIO configuration"
4.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <johan@...nel.org>
commit 85b03b3033fd4eba82665b3b9902c095a08cc52f upstream.
This reverts commit 923b93e451db876d1479d3e4458fce14fec31d1c.
Make sure consumers do not overwrite gpio flags for pins that have
already been claimed.
While adding support for gpio drivers to refuse a request using
unsupported flags, the order of when the requested flag was checked and
the new flags were applied was reversed to that consumers could
overwrite flags for already requested gpios.
This not only affects device-tree setups where two drivers could request
the same gpio using conflicting configurations, but also allowed user
space to clear gpio flags for already claimed pins simply by attempting
to export them through the sysfs interface. By for example clearing the
FLAG_ACTIVE_LOW flag this way, user space could effectively change the
polarity of a signal.
Reverting this change obviously prevents gpio drivers from doing sanity
checks on the flags in their request callbacks. Fortunately only one
recently added driver (gpio-tps65218 in v4.6) appears to do this, and a
follow up patch could restore this functionality through a different
interface.
Signed-off-by: Johan Hovold <johan@...nel.org>
Signed-off-by: Linus Walleij <linus.walleij@...aro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
drivers/gpio/gpiolib-legacy.c | 8 +++---
drivers/gpio/gpiolib.c | 52 ++++++++++++------------------------------
2 files changed, 20 insertions(+), 40 deletions(-)
--- a/drivers/gpio/gpiolib-legacy.c
+++ b/drivers/gpio/gpiolib-legacy.c
@@ -28,6 +28,10 @@ int gpio_request_one(unsigned gpio, unsi
if (!desc && gpio_is_valid(gpio))
return -EPROBE_DEFER;
+ err = gpiod_request(desc, label);
+ if (err)
+ return err;
+
if (flags & GPIOF_OPEN_DRAIN)
set_bit(FLAG_OPEN_DRAIN, &desc->flags);
@@ -37,10 +41,6 @@ int gpio_request_one(unsigned gpio, unsi
if (flags & GPIOF_ACTIVE_LOW)
set_bit(FLAG_ACTIVE_LOW, &desc->flags);
- err = gpiod_request(desc, label);
- if (err)
- return err;
-
if (flags & GPIOF_DIR_IN)
err = gpiod_direction_input(desc);
else
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -1324,14 +1324,6 @@ static int __gpiod_request(struct gpio_d
spin_lock_irqsave(&gpio_lock, flags);
}
done:
- if (status < 0) {
- /* Clear flags that might have been set by the caller before
- * requesting the GPIO.
- */
- clear_bit(FLAG_ACTIVE_LOW, &desc->flags);
- clear_bit(FLAG_OPEN_DRAIN, &desc->flags);
- clear_bit(FLAG_OPEN_SOURCE, &desc->flags);
- }
spin_unlock_irqrestore(&gpio_lock, flags);
return status;
}
@@ -2515,28 +2507,13 @@ struct gpio_desc *__must_check gpiod_get
}
EXPORT_SYMBOL_GPL(gpiod_get_optional);
-/**
- * gpiod_parse_flags - helper function to parse GPIO lookup flags
- * @desc: gpio to be setup
- * @lflags: gpio_lookup_flags - returned from of_find_gpio() or
- * of_get_gpio_hog()
- *
- * Set the GPIO descriptor flags based on the given GPIO lookup flags.
- */
-static void gpiod_parse_flags(struct gpio_desc *desc, unsigned long lflags)
-{
- if (lflags & GPIO_ACTIVE_LOW)
- set_bit(FLAG_ACTIVE_LOW, &desc->flags);
- if (lflags & GPIO_OPEN_DRAIN)
- set_bit(FLAG_OPEN_DRAIN, &desc->flags);
- if (lflags & GPIO_OPEN_SOURCE)
- set_bit(FLAG_OPEN_SOURCE, &desc->flags);
-}
/**
* gpiod_configure_flags - helper function to configure a given GPIO
* @desc: gpio whose value will be assigned
* @con_id: function within the GPIO consumer
+ * @lflags: gpio_lookup_flags - returned from of_find_gpio() or
+ * of_get_gpio_hog()
* @dflags: gpiod_flags - optional GPIO initialization flags
*
* Return 0 on success, -ENOENT if no GPIO has been assigned to the
@@ -2544,10 +2521,17 @@ static void gpiod_parse_flags(struct gpi
* occurred while trying to acquire the GPIO.
*/
static int gpiod_configure_flags(struct gpio_desc *desc, const char *con_id,
- enum gpiod_flags dflags)
+ unsigned long lflags, enum gpiod_flags dflags)
{
int status;
+ if (lflags & GPIO_ACTIVE_LOW)
+ set_bit(FLAG_ACTIVE_LOW, &desc->flags);
+ if (lflags & GPIO_OPEN_DRAIN)
+ set_bit(FLAG_OPEN_DRAIN, &desc->flags);
+ if (lflags & GPIO_OPEN_SOURCE)
+ set_bit(FLAG_OPEN_SOURCE, &desc->flags);
+
/* No particular flag request, return here... */
if (!(dflags & GPIOD_FLAGS_BIT_DIR_SET)) {
pr_debug("no flags found for %s\n", con_id);
@@ -2614,13 +2598,11 @@ struct gpio_desc *__must_check gpiod_get
return desc;
}
- gpiod_parse_flags(desc, lookupflags);
-
status = gpiod_request(desc, con_id);
if (status < 0)
return ERR_PTR(status);
- status = gpiod_configure_flags(desc, con_id, flags);
+ status = gpiod_configure_flags(desc, con_id, lookupflags, flags);
if (status < 0) {
dev_dbg(dev, "setup of GPIO %s failed\n", con_id);
gpiod_put(desc);
@@ -2676,6 +2658,10 @@ struct gpio_desc *fwnode_get_named_gpiod
if (IS_ERR(desc))
return desc;
+ ret = gpiod_request(desc, NULL);
+ if (ret)
+ return ERR_PTR(ret);
+
if (active_low)
set_bit(FLAG_ACTIVE_LOW, &desc->flags);
@@ -2686,10 +2672,6 @@ struct gpio_desc *fwnode_get_named_gpiod
set_bit(FLAG_OPEN_SOURCE, &desc->flags);
}
- ret = gpiod_request(desc, NULL);
- if (ret)
- return ERR_PTR(ret);
-
return desc;
}
EXPORT_SYMBOL_GPL(fwnode_get_named_gpiod);
@@ -2742,8 +2724,6 @@ int gpiod_hog(struct gpio_desc *desc, co
chip = gpiod_to_chip(desc);
hwnum = gpio_chip_hwgpio(desc);
- gpiod_parse_flags(desc, lflags);
-
local_desc = gpiochip_request_own_desc(chip, hwnum, name);
if (IS_ERR(local_desc)) {
pr_err("requesting hog GPIO %s (chip %s, offset %d) failed\n",
@@ -2751,7 +2731,7 @@ int gpiod_hog(struct gpio_desc *desc, co
return PTR_ERR(local_desc);
}
- status = gpiod_configure_flags(desc, name, dflags);
+ status = gpiod_configure_flags(desc, name, lflags, dflags);
if (status < 0) {
pr_err("setup of hog GPIO %s (chip %s, offset %d) failed\n",
name, chip->label, hwnum);
Powered by blists - more mailing lists