linux-kernel - Re: [PATCH v4] ARM: dts: sun8i: Add dts file for Olimex A33-OLinuXino

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20160726153352.GH7190@lukather>
Date:	Tue, 26 Jul 2016 17:33:52 +0200
From:	Maxime Ripard <maxime.ripard@...e-electrons.com>
To:	Stefan Mavrodiev <stefan.mavrodiev@...il.com>
Cc:	dt@...nel.org, pawel.moll@....com, mark.rutland@....com,
	ijc+devicetree@...lion.org.uk, galak@...eaurora.org,
	linux@...linux.org.uk, wens@...e.org, devicetree@...r.kernel.org,
	linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
	linux-sunxi@...glegroups.com
Subject: Re: [PATCH v4] ARM: dts: sun8i: Add dts file for Olimex A33-OLinuXino

Hi Stefan,

On Mon, Jul 25, 2016 at 03:37:23PM +0300, Stefan Mavrodiev wrote:
> A33-OLinuXino is A33 development board designed by Olimex LTD.
> 
> It has AXP233 PMU, 1GB DRAM, a micro SD card, one USB-OTG connector,
> headphone and mic jacks, connector for LiPo battery and optional
> 4GB NAND Flash.
> 
> It has two 40-pin headers. One for LCD panel, and one for
> additional modules. Also there is CSI/DSI connector.
> 
> Signed-off-by: Stefan Mavrodiev <stefan.mavrodiev@...il.com>

It looks mostly good, a few comments though.
> +&pio {
> +	led_pin_olinuxino: led_pins@0 {
> +		allwinner,pins = "PB7";
> +        allwinner,function = "gpio_out";

This line is not properly indented.

> +		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> +		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> +    };

And this one too.

> +&reg_dc1sw {
> +	regulator-name = "vcc-lcd";
> +};

No constraints on this one?

> +&reg_dcdc1 {
> +	regulator-always-on;
> +	regulator-min-microvolt = <3300000>;
> +	regulator-max-microvolt = <3300000>;
> +	regulator-name = "vcc-dsi";
> +};

What is it used for? Is it really necessary to keep it on at all time?

Thanks,
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

Download attachment "signature.asc" of type "application/pgp-signature" (820 bytes)