| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1469556593-11369-3-git-send-email-yamada.masahiro@socionext.com>
Date: Wed, 27 Jul 2016 03:09:53 +0900
From: Masahiro Yamada <yamada.masahiro@...ionext.com>
To: linux-clk@...r.kernel.org
Cc: Masahiro Yamada <yamada.masahiro@...ionext.com>,
devicetree@...r.kernel.org,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...eaurora.org>,
linux-kernel@...r.kernel.org, Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
linux-arm-kernel@...ts.infradead.org
Subject: [PATCH v5 2/2] clk: uniphier: add clock data for UniPhier SoCs
Add clock data arrays for all UniPhier SoCs.
Signed-off-by: Masahiro Yamada <yamada.masahiro@...ionext.com>
---
.../devicetree/bindings/clock/uniphier-clock.txt | 123 ++++
drivers/clk/uniphier/Makefile | 3 +
drivers/clk/uniphier/clk-uniphier-core.c | 91 +++
drivers/clk/uniphier/clk-uniphier-mio.c | 195 +++++++
drivers/clk/uniphier/clk-uniphier-peri.c | 95 ++++
drivers/clk/uniphier/clk-uniphier-sys.c | 626 +++++++++++++++++++++
drivers/clk/uniphier/clk-uniphier.h | 13 +
7 files changed, 1146 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/uniphier-clock.txt
create mode 100644 drivers/clk/uniphier/clk-uniphier-mio.c
create mode 100644 drivers/clk/uniphier/clk-uniphier-peri.c
create mode 100644 drivers/clk/uniphier/clk-uniphier-sys.c
diff --git a/Documentation/devicetree/bindings/clock/uniphier-clock.txt b/Documentation/devicetree/bindings/clock/uniphier-clock.txt
new file mode 100644
index 0000000..1a4fee1
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/uniphier-clock.txt
@@ -0,0 +1,123 @@
+UniPhier clock controller
+
+
+System clock
+------------
+
+Required properties:
+- compatible: should be one of the following:
+ "socionext,uniphier-sld3-clock" - for PH1-sLD3 SoC.
+ "socionext,uniphier-ld4-clock" - for PH1-LD4 SoC.
+ "socionext,uniphier-pro4-clock" - for PH1-Pro4 SoC.
+ "socionext,uniphier-sld8-clock" - for PH1-sLD8 SoC.
+ "socionext,uniphier-pro5-clock" - for PH1-Pro5 SoC.
+ "socionext,uniphier-pxs2-clock" - for ProXstream2/PH1-LD6b SoC.
+ "socionext,uniphier-ld11-clock" - for PH1-LD11 SoC.
+ "socionext,uniphier-ld20-clock" - for PH1-LD20 SoC.
+- #clock-cells: should be 1.
+
+Note:
+The clock node should be a child of a syscon node.
+
+Example:
+
+ sysctrl@...40000 {
+ compatible = "simple-mfd", "syscon";
+ reg = <0x61840000 0x4000>;
+
+ clock {
+ compatible = "socionext,uniphier-ld20-clock";
+ #clock-cells = <1>;
+ };
+
+ other nodes ...
+ };
+
+
+Media I/O (MIO) clock
+---------------------
+
+Required properties:
+- compatible: should be one of the following:
+ "socionext,uniphier-sld3-mio-clock" - for PH1-sLD3 SoC.
+ "socionext,uniphier-ld4-mio-clock" - for PH1-LD4 SoC.
+ "socionext,uniphier-pro4-mio-clock" - for PH1-Pro4 SoC.
+ "socionext,uniphier-sld8-mio-clock" - for PH1-sLD8 SoC.
+ "socionext,uniphier-pro5-mio-clock" - for PH1-Pro5 SoC.
+ "socionext,uniphier-pxs2-mio-clock" - for ProXstream2/PH1-LD6b SoC.
+ "socionext,uniphier-ld11-mio-clock" - for PH1-LD11 SoC.
+ "socionext,uniphier-ld20-mio-clock" - for PH1-LD20 SoC.
+- #clock-cells: should be 1.
+
+Note:
+The clock node should be a child of a syscon node.
+
+Example:
+
+ mioctrl@...10000 {
+ compatible = "simple-mfd", "syscon";
+ reg = <0x59810000 0x800>;
+
+ clock {
+ compatible = "socionext,uniphier-ld20-mio-clock";
+ #clock-cells = <1>;
+ };
+
+ other nodes ...
+ };
+
+Provided clocks:
+
+0: SD host ch0
+1: eMMC host
+2: SD host ch1
+3: MIO DMAC
+4: USB2 host ch0
+5: USB2 host ch1
+6: USB2 host ch2
+7: USB2 host ch3
+
+
+Peripheral clock
+----------------
+
+Required properties:
+- compatible: should be one of the following:
+ "socionext,uniphier-sld3-peri-clock" - for PH1-sLD3 SoC.
+ "socionext,uniphier-ld4-peri-clock" - for PH1-LD4 SoC.
+ "socionext,uniphier-pro4-peri-clock" - for PH1-Pro4 SoC.
+ "socionext,uniphier-sld8-peri-clock" - for PH1-sLD8 SoC.
+ "socionext,uniphier-pro5-peri-clock" - for PH1-Pro5 SoC.
+ "socionext,uniphier-pxs2-peri-clock" - for ProXstream2/PH1-LD6b SoC.
+ "socionext,uniphier-ld11-peri-clock" - for PH1-LD11 SoC.
+ "socionext,uniphier-ld20-peri-clock" - for PH1-LD20 SoC.
+- #clock-cells: should be 1.
+
+Note:
+The clock node should be a child of a syscon node.
+
+Example:
+
+ perictrl@...20000 {
+ compatible = "simple-mfd", "syscon";
+ reg = <0x59820000 0x200>;
+
+ clock {
+ compatible = "socionext,uniphier-ld20-peri-clock";
+ #clock-cells = <1>;
+ };
+
+ other nodes ...
+ };
+
+ 0: UART ch0
+ 1: UART ch1
+ 2: UART ch2
+ 3: UART ch3
+ 4: I2C ch0
+ 5: I2C ch1
+ 6: I2C ch2
+ 7: I2C ch3
+ 8: I2C ch4
+ 9: I2C ch5
+10: I2C ch6
diff --git a/drivers/clk/uniphier/Makefile b/drivers/clk/uniphier/Makefile
index 8f359aa..6822691 100644
--- a/drivers/clk/uniphier/Makefile
+++ b/drivers/clk/uniphier/Makefile
@@ -4,3 +4,6 @@ clk-uniphier-y += clk-uniphier-fixed-factor.o
clk-uniphier-y += clk-uniphier-fixed-rate.o
clk-uniphier-y += clk-uniphier-gate.o
clk-uniphier-y += clk-uniphier-mux.o
+clk-uniphier-y += clk-uniphier-sys.o
+clk-uniphier-y += clk-uniphier-mio.o
+clk-uniphier-y += clk-uniphier-peri.o
diff --git a/drivers/clk/uniphier/clk-uniphier-core.c b/drivers/clk/uniphier/clk-uniphier-core.c
index fcb7582..57e6762 100644
--- a/drivers/clk/uniphier/clk-uniphier-core.c
+++ b/drivers/clk/uniphier/clk-uniphier-core.c
@@ -45,6 +45,97 @@ static struct clk_hw *uniphier_clk_register(struct device *dev,
}
static const struct of_device_id uniphier_clk_match[] = {
+ /* System clock */
+ {
+ .compatible = "socionext,uniphier-ld4-clock",
+ .data = uniphier_ld4_sys_clk_data,
+ },
+ {
+ .compatible = "socionext,uniphier-pro4-clock",
+ .data = uniphier_pro4_sys_clk_data,
+ },
+ {
+ .compatible = "socionext,uniphier-sld8-clock",
+ .data = uniphier_sld8_sys_clk_data,
+ },
+ {
+ .compatible = "socionext,uniphier-pro5-clock",
+ .data = uniphier_pro5_sys_clk_data,
+ },
+ {
+ .compatible = "socionext,uniphier-pxs2-clock",
+ .data = uniphier_pxs2_sys_clk_data,
+ },
+ {
+ .compatible = "socionext,uniphier-ld11-clock",
+ .data = uniphier_ld11_sys_clk_data,
+ },
+ {
+ .compatible = "socionext,uniphier-ld20-clock",
+ .data = uniphier_ld20_sys_clk_data,
+ },
+ /* Media I/O clock */
+ {
+ .compatible = "socionext,uniphier-sld3-mio-clock",
+ .data = uniphier_sld3_mio_clk_data,
+ },
+ {
+ .compatible = "socionext,uniphier-ld4-mio-clock",
+ .data = uniphier_sld3_mio_clk_data,
+ },
+ {
+ .compatible = "socionext,uniphier-pro4-mio-clock",
+ .data = uniphier_sld3_mio_clk_data,
+ },
+ {
+ .compatible = "socionext,uniphier-sld8-mio-clock",
+ .data = uniphier_sld3_mio_clk_data,
+ },
+ {
+ .compatible = "socionext,uniphier-pro5-mio-clock",
+ .data = uniphier_pro5_mio_clk_data,
+ },
+ {
+ .compatible = "socionext,uniphier-pxs2-mio-clock",
+ .data = uniphier_pro5_mio_clk_data,
+ },
+ {
+ .compatible = "socionext,uniphier-ld11-mio-clock",
+ .data = uniphier_sld3_mio_clk_data,
+ },
+ {
+ .compatible = "socionext,uniphier-ld20-mio-clock",
+ .data = uniphier_pro5_mio_clk_data,
+ },
+ /* Peripheral clock */
+ {
+ .compatible = "socionext,uniphier-ld4-peri-clock",
+ .data = uniphier_ld4_peri_clk_data,
+ },
+ {
+ .compatible = "socionext,uniphier-pro4-peri-clock",
+ .data = uniphier_pro4_peri_clk_data,
+ },
+ {
+ .compatible = "socionext,uniphier-sld8-peri-clock",
+ .data = uniphier_ld4_peri_clk_data,
+ },
+ {
+ .compatible = "socionext,uniphier-pro5-peri-clock",
+ .data = uniphier_pro4_peri_clk_data,
+ },
+ {
+ .compatible = "socionext,uniphier-pxs2-peri-clock",
+ .data = uniphier_pro4_peri_clk_data,
+ },
+ {
+ .compatible = "socionext,uniphier-ld11-peri-clock",
+ .data = uniphier_pro4_peri_clk_data,
+ },
+ {
+ .compatible = "socionext,uniphier-ld20-peri-clock",
+ .data = uniphier_pro4_peri_clk_data,
+ },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, uniphier_clk_match);
diff --git a/drivers/clk/uniphier/clk-uniphier-mio.c b/drivers/clk/uniphier/clk-uniphier-mio.c
new file mode 100644
index 0000000..711bab5
--- /dev/null
+++ b/drivers/clk/uniphier/clk-uniphier-mio.c
@@ -0,0 +1,195 @@
+/*
+ * Copyright (C) 2016 Socionext Inc.
+ * Author: Masahiro Yamada <yamada.masahiro@...ionext.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/bitops.h>
+
+#include "clk-uniphier.h"
+
+#define UNIPHIER_MIO_CLK_SD_FIXED \
+ { \
+ .name = "sd-44m", \
+ .type = UNIPHIER_CLK_TYPE_FIXED_FACTOR, \
+ .output_index = -1, \
+ .data.factor = { \
+ .parent_name = "sd-133m", \
+ .mult = 1, \
+ .div = 3, \
+ }, \
+ }, \
+ { \
+ .name = "sd-33m", \
+ .type = UNIPHIER_CLK_TYPE_FIXED_FACTOR, \
+ .output_index = -1, \
+ .data.factor = { \
+ .parent_name = "sd-200m", \
+ .mult = 1, \
+ .div = 6, \
+ }, \
+ }, \
+ { \
+ .name = "sd-50m", \
+ .type = UNIPHIER_CLK_TYPE_FIXED_FACTOR, \
+ .output_index = -1, \
+ .data.factor = { \
+ .parent_name = "sd-200m", \
+ .mult = 1, \
+ .div = 4, \
+ }, \
+ }, \
+ { \
+ .name = "sd-67m", \
+ .type = UNIPHIER_CLK_TYPE_FIXED_FACTOR, \
+ .output_index = -1, \
+ .data.factor = { \
+ .parent_name = "sd-200m", \
+ .mult = 1, \
+ .div = 3, \
+ }, \
+ }, \
+ { \
+ .name = "sd-100m", \
+ .type = UNIPHIER_CLK_TYPE_FIXED_FACTOR, \
+ .output_index = -1, \
+ .data.factor = { \
+ .parent_name = "sd-200m", \
+ .mult = 1, \
+ .div = 2, \
+ }, \
+ }, \
+ { \
+ .name = "sd-40m", \
+ .type = UNIPHIER_CLK_TYPE_FIXED_FACTOR, \
+ .output_index = -1, \
+ .data.factor = { \
+ .parent_name = "sd-200m", \
+ .mult = 1, \
+ .div = 5, \
+ }, \
+ }, \
+ { \
+ .name = "sd-25m", \
+ .type = UNIPHIER_CLK_TYPE_FIXED_FACTOR, \
+ .output_index = -1, \
+ .data.factor = { \
+ .parent_name = "sd-200m", \
+ .mult = 1, \
+ .div = 8, \
+ }, \
+ }, \
+ { \
+ .name = "sd-22m", \
+ .type = UNIPHIER_CLK_TYPE_FIXED_FACTOR, \
+ .output_index = -1, \
+ .data.factor = { \
+ .parent_name = "sd-133m", \
+ .mult = 1, \
+ .div = 6, \
+ }, \
+ }
+
+#define UNIPHIER_MIO_CLK_SD(index, ch) \
+ { \
+ .name = "sd" #ch "-sel", \
+ .type = UNIPHIER_CLK_TYPE_MUX, \
+ .output_index = -1, \
+ .data.mux = { \
+ .parent_names = { \
+ "sd-44m", \
+ "sd-33m", \
+ "sd-50m", \
+ "sd-67m", \
+ "sd-100m", \
+ "sd-40m", \
+ "sd-25m", \
+ "sd-22m", \
+ }, \
+ .num_parents = 8, \
+ .reg = 0x30 + 0x200 * ch, \
+ .masks = { \
+ 0x00031000, \
+ 0x00031000, \
+ 0x00031000, \
+ 0x00031000, \
+ 0x00001300, \
+ 0x00001300, \
+ 0x00001300, \
+ 0x00001300, \
+ }, \
+ .vals = { \
+ 0x00000000, \
+ 0x00010000, \
+ 0x00020000, \
+ 0x00030000, \
+ 0x00001000, \
+ 0x00001100, \
+ 0x00001200, \
+ 0x00001300, \
+ }, \
+ }, \
+ }, \
+ { \
+ .name = "sd" #ch, \
+ .type = UNIPHIER_CLK_TYPE_GATE, \
+ .output_index = (index), \
+ .data.gate = { \
+ .parent_name = "sd" #ch "-sel", \
+ .reg = 0x20 + 0x200 * ch, \
+ .mask = BIT(8), \
+ }, \
+ }
+
+#define UNIPHIER_MIO_CLK_USB2(index, ch) \
+ { \
+ .name = "usb2" #ch, \
+ .type = UNIPHIER_CLK_TYPE_GATE, \
+ .output_index = (index), \
+ .data.gate = { \
+ .parent_name = "usb2", \
+ .reg = 0x20 + 0x200 * ch, \
+ .mask = BIT(29) | BIT(28), \
+ }, \
+ }
+
+#define UNIPHIER_MIO_CLK_DMAC(index) \
+ { \
+ .name = "miodmac", \
+ .type = UNIPHIER_CLK_TYPE_GATE, \
+ .output_index = (index), \
+ .data.gate = { \
+ .parent_name = "stdmac", \
+ .reg = 0x20, \
+ .mask = BIT(25), \
+ }, \
+ }
+
+const struct uniphier_clk_data uniphier_sld3_mio_clk_data[] = {
+ UNIPHIER_MIO_CLK_SD_FIXED,
+ UNIPHIER_MIO_CLK_SD(0, 0),
+ UNIPHIER_MIO_CLK_SD(1, 1),
+ UNIPHIER_MIO_CLK_SD(2, 2),
+ UNIPHIER_MIO_CLK_DMAC(3),
+ UNIPHIER_MIO_CLK_USB2(4, 0),
+ UNIPHIER_MIO_CLK_USB2(5, 1),
+ UNIPHIER_MIO_CLK_USB2(6, 2),
+ UNIPHIER_MIO_CLK_USB2(7, 3),
+ { /* sentinel */ }
+};
+
+const struct uniphier_clk_data uniphier_pro5_mio_clk_data[] = {
+ UNIPHIER_MIO_CLK_SD_FIXED,
+ UNIPHIER_MIO_CLK_SD(0, 0),
+ UNIPHIER_MIO_CLK_SD(1, 1),
+ { /* sentinel */ }
+};
diff --git a/drivers/clk/uniphier/clk-uniphier-peri.c b/drivers/clk/uniphier/clk-uniphier-peri.c
new file mode 100644
index 0000000..029c65f
--- /dev/null
+++ b/drivers/clk/uniphier/clk-uniphier-peri.c
@@ -0,0 +1,95 @@
+/*
+ * Copyright (C) 2016 Socionext Inc.
+ * Author: Masahiro Yamada <yamada.masahiro@...ionext.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/bitops.h>
+
+#include "clk-uniphier.h"
+
+#define UNIPHIER_PERI_CLK_UART(index, ch) \
+ { \
+ .name = "uart" #ch, \
+ .type = UNIPHIER_CLK_TYPE_GATE, \
+ .output_index = (index), \
+ .data.gate = { \
+ .parent_name = "uart", \
+ .reg = 0x24, \
+ .mask = BIT(19 + (ch)), \
+ }, \
+ }
+
+#define UNIPHIER_PERI_CLK_I2C_COMMON \
+ { \
+ .name = "i2c-common", \
+ .type = UNIPHIER_CLK_TYPE_GATE, \
+ .output_index = -1, \
+ .data.gate = { \
+ .parent_name = "i2c", \
+ .reg = 0x20, \
+ .mask = BIT(1), \
+ }, \
+ }
+
+#define UNIPHIER_PERI_CLK_I2C(index, ch) \
+ { \
+ .name = "i2c" #ch, \
+ .type = UNIPHIER_CLK_TYPE_GATE, \
+ .output_index = (index), \
+ .data.gate = { \
+ .parent_name = "i2c-common", \
+ .reg = 0x24, \
+ .mask = BIT(5 + (ch)), \
+ }, \
+ }
+
+#define UNIPHIER_PERI_CLK_FI2C(index, ch) \
+ { \
+ .name = "i2c" #ch, \
+ .type = UNIPHIER_CLK_TYPE_GATE, \
+ .output_index = (index), \
+ .data.gate = { \
+ .parent_name = "i2c", \
+ .reg = 0x24, \
+ .mask = BIT(24 + (ch)), \
+ }, \
+ }
+
+const struct uniphier_clk_data uniphier_ld4_peri_clk_data[] = {
+ UNIPHIER_PERI_CLK_UART(0, 0),
+ UNIPHIER_PERI_CLK_UART(1, 1),
+ UNIPHIER_PERI_CLK_UART(2, 2),
+ UNIPHIER_PERI_CLK_UART(3, 3),
+ UNIPHIER_PERI_CLK_I2C_COMMON,
+ UNIPHIER_PERI_CLK_I2C(4, 0),
+ UNIPHIER_PERI_CLK_I2C(5, 1),
+ UNIPHIER_PERI_CLK_I2C(6, 2),
+ UNIPHIER_PERI_CLK_I2C(7, 3),
+ UNIPHIER_PERI_CLK_I2C(8, 4),
+ { /* sentinel */ }
+};
+
+const struct uniphier_clk_data uniphier_pro4_peri_clk_data[] = {
+ UNIPHIER_PERI_CLK_UART(0, 0),
+ UNIPHIER_PERI_CLK_UART(1, 1),
+ UNIPHIER_PERI_CLK_UART(2, 2),
+ UNIPHIER_PERI_CLK_UART(3, 3),
+ UNIPHIER_PERI_CLK_FI2C(4, 0),
+ UNIPHIER_PERI_CLK_FI2C(5, 1),
+ UNIPHIER_PERI_CLK_FI2C(6, 2),
+ UNIPHIER_PERI_CLK_FI2C(7, 3),
+ UNIPHIER_PERI_CLK_FI2C(8, 4),
+ UNIPHIER_PERI_CLK_FI2C(9, 5),
+ UNIPHIER_PERI_CLK_FI2C(10, 6),
+ { /* sentinel */ }
+};
diff --git a/drivers/clk/uniphier/clk-uniphier-sys.c b/drivers/clk/uniphier/clk-uniphier-sys.c
new file mode 100644
index 0000000..2e1e4cc
--- /dev/null
+++ b/drivers/clk/uniphier/clk-uniphier-sys.c
@@ -0,0 +1,626 @@
+/*
+ * Copyright (C) 2016 Socionext Inc.
+ * Author: Masahiro Yamada <yamada.masahiro@...ionext.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/bitops.h>
+
+#include "clk-uniphier.h"
+
+#define UNIPHIER_SLD3_SYS_CLK_SD \
+ { \
+ .name = "sd-200m", \
+ .type = UNIPHIER_CLK_TYPE_FIXED_FACTOR, \
+ .output_index = -1, \
+ .data.factor = { \
+ .parent_name = "spll", \
+ .mult = 1, \
+ .div = 8, \
+ }, \
+ }, \
+ { \
+ .name = "sd-133m", \
+ .type = UNIPHIER_CLK_TYPE_FIXED_FACTOR, \
+ .output_index = -1, \
+ .data.factor = { \
+ .parent_name = "vpll27a", \
+ .mult = 1, \
+ .div = 2, \
+ }, \
+ }
+
+#define UNIPHIER_PRO5_SYS_CLK_SD \
+ { \
+ .name = "sd-200m", \
+ .type = UNIPHIER_CLK_TYPE_FIXED_FACTOR, \
+ .output_index = -1, \
+ .data.factor = { \
+ .parent_name = "spll", \
+ .mult = 1, \
+ .div = 12, \
+ }, \
+ }, \
+ { \
+ .name = "sd-133m", \
+ .type = UNIPHIER_CLK_TYPE_FIXED_FACTOR, \
+ .output_index = -1, \
+ .data.factor = { \
+ .parent_name = "spll", \
+ .mult = 1, \
+ .div = 18, \
+ }, \
+ }
+
+#define UNIPHIER_LD20_SYS_CLK_SD \
+ { \
+ .name = "sd-200m", \
+ .type = UNIPHIER_CLK_TYPE_FIXED_FACTOR, \
+ .output_index = -1, \
+ .data.factor = { \
+ .parent_name = "spll", \
+ .mult = 1, \
+ .div = 10, \
+ }, \
+ }, \
+ { \
+ .name = "sd-133m", \
+ .type = UNIPHIER_CLK_TYPE_FIXED_FACTOR, \
+ .output_index = -1, \
+ .data.factor = { \
+ .parent_name = "spll", \
+ .mult = 1, \
+ .div = 15, \
+ }, \
+ }
+
+#define UNIPHIER_PRO5_SYS_CLK_I2C \
+ { \
+ .name = "i2c", \
+ .type = UNIPHIER_CLK_TYPE_FIXED_FACTOR, \
+ .output_index = -1, \
+ .data.factor = { \
+ .parent_name = "spll", \
+ .mult = 1, \
+ .div = 48, \
+ }, \
+ }
+
+#define UNIPHIER_LD11_SYS_CLK_I2C \
+ { \
+ .name = "i2c", \
+ .type = UNIPHIER_CLK_TYPE_FIXED_FACTOR, \
+ .output_index = -1, \
+ .data.factor = { \
+ .parent_name = "spll", \
+ .mult = 1, \
+ .div = 40, \
+ }, \
+ }
+
+#define UNIPHIER_SLD3_SYS_CLK_STDMAC(index) \
+ { \
+ .name = "stdmac", \
+ .type = UNIPHIER_CLK_TYPE_GATE, \
+ .output_index = (index), \
+ .data.gate = { \
+ .parent_name = NULL, \
+ .reg = 0x2104, \
+ .mask = BIT(10), \
+ }, \
+ }
+
+#define UNIPHIER_LD11_SYS_CLK_STDMAC(index) \
+ { \
+ .name = "stdmac", \
+ .type = UNIPHIER_CLK_TYPE_GATE, \
+ .output_index = (index), \
+ .data.gate = { \
+ .parent_name = NULL, \
+ .reg = 0x210c, \
+ .mask = BIT(8), \
+ }, \
+ }
+
+#define UNIPHIER_PRO4_SYS_CLK_GIO(index) \
+ { \
+ .name = "gio", \
+ .type = UNIPHIER_CLK_TYPE_GATE, \
+ .output_index = (index), \
+ .data.gate = { \
+ .parent_name = NULL, \
+ .reg = 0x2104, \
+ .mask = BIT(6), \
+ }, \
+ }
+
+#define UNIPHIER_PRO4_SYS_CLK_USB3(index, ch) \
+ { \
+ .name = "usb3" #ch, \
+ .type = UNIPHIER_CLK_TYPE_GATE, \
+ .output_index = (index), \
+ .data.gate = { \
+ .parent_name = NULL, \
+ .reg = 0x2104, \
+ .mask = BIT(16 + (ch)), \
+ }, \
+ }
+
+#define UNIPHIER_PXS2_SYS_CLK_USB3PHY(index, ch) \
+ { \
+ .name = "usb3" #ch "phy", \
+ .type = UNIPHIER_CLK_TYPE_GATE, \
+ .output_index = (index), \
+ .data.gate = { \
+ .parent_name = NULL, \
+ .reg = 0x2104, \
+ .mask = BIT(19 + (ch)), \
+ }, \
+ }
+
+const struct uniphier_clk_data uniphier_sld3_sys_clk_data[] = {
+ {
+ .name = "spll", /* 1597.44 MHz */
+ .type = UNIPHIER_CLK_TYPE_FIXED_FACTOR,
+ .output_index = -1,
+ .data.factor = {
+ .parent_name = "ref",
+ .mult = 65,
+ .div = 1,
+ },
+ },
+ {
+ .name = "upll", /* 288 MHz */
+ .type = UNIPHIER_CLK_TYPE_FIXED_FACTOR,
+ .output_index = -1,
+ .data.factor = {
+ .parent_name = "ref",
+ .mult = 288000,
+ .div = 24576,
+ },
+ },
+ {
+ .name = "a2pll", /* 589.824 MHz */
+ .type = UNIPHIER_CLK_TYPE_FIXED_FACTOR,
+ .output_index = -1,
+ .data.factor = {
+ .parent_name = "ref",
+ .mult = 24,
+ .div = 1,
+ },
+ },
+ {
+ .name = "vpll27a", /* 270 MHz */
+ .type = UNIPHIER_CLK_TYPE_FIXED_FACTOR,
+ .output_index = -1,
+ .data.factor = {
+ .parent_name = "ref",
+ .mult = 270000,
+ .div = 24576,
+ },
+ },
+ {
+ .name = "uart",
+ .type = UNIPHIER_CLK_TYPE_FIXED_FACTOR,
+ .output_index = 0,
+ .data.factor = {
+ .parent_name = "a2pll",
+ .mult = 1,
+ .div = 16,
+ },
+ },
+ {
+ .name = "i2c",
+ .type = UNIPHIER_CLK_TYPE_FIXED_FACTOR,
+ .output_index = 1,
+ .data.factor = {
+ .parent_name = "spll",
+ .mult = 1,
+ .div = 16,
+ },
+ },
+ UNIPHIER_SLD3_SYS_CLK_SD,
+ {
+ .name = "usb2",
+ .type = UNIPHIER_CLK_TYPE_FIXED_FACTOR,
+ .output_index = -1,
+ .data.factor = {
+ .parent_name = "upll",
+ .mult = 1,
+ .div = 12,
+ },
+ },
+ UNIPHIER_SLD3_SYS_CLK_STDMAC(8),
+ { /* sentinel */ }
+};
+
+const struct uniphier_clk_data uniphier_ld4_sys_clk_data[] = {
+ {
+ .name = "spll", /* 1597.44 MHz */
+ .type = UNIPHIER_CLK_TYPE_FIXED_FACTOR,
+ .output_index = -1,
+ .data.factor = {
+ .parent_name = "ref",
+ .mult = 65,
+ .div = 1,
+ },
+ },
+ {
+ .name = "upll", /* 288 MHz */
+ .type = UNIPHIER_CLK_TYPE_FIXED_FACTOR,
+ .output_index = -1,
+ .data.factor = {
+ .parent_name = "ref",
+ .mult = 288000,
+ .div = 24576,
+ },
+ },
+ {
+ .name = "a2pll", /* 589.824 MHz */
+ .type = UNIPHIER_CLK_TYPE_FIXED_FACTOR,
+ .output_index = -1,
+ .data.factor = {
+ .parent_name = "ref",
+ .mult = 24,
+ .div = 1,
+ },
+ },
+ {
+ .name = "vpll27a", /* 270 MHz */
+ .type = UNIPHIER_CLK_TYPE_FIXED_FACTOR,
+ .output_index = -1,
+ .data.factor = {
+ .parent_name = "ref",
+ .mult = 270000,
+ .div = 24576,
+ },
+ },
+ {
+ .name = "uart",
+ .type = UNIPHIER_CLK_TYPE_FIXED_FACTOR,
+ .output_index = -1,
+ .data.factor = {
+ .parent_name = "a2pll",
+ .mult = 1,
+ .div = 16,
+ },
+ },
+ {
+ .name = "i2c",
+ .type = UNIPHIER_CLK_TYPE_FIXED_FACTOR,
+ .output_index = -1,
+ .data.factor = {
+ .parent_name = "spll",
+ .mult = 1,
+ .div = 16,
+ },
+ },
+ UNIPHIER_SLD3_SYS_CLK_SD,
+ {
+ .name = "usb2",
+ .type = UNIPHIER_CLK_TYPE_FIXED_FACTOR,
+ .output_index = -1,
+ .data.factor = {
+ .parent_name = "upll",
+ .mult = 1,
+ .div = 12,
+ },
+ },
+ UNIPHIER_SLD3_SYS_CLK_STDMAC(8), /* Ether, HSC, MIO */
+ { /* sentinel */ }
+};
+
+const struct uniphier_clk_data uniphier_pro4_sys_clk_data[] = {
+ {
+ .name = "spll", /* 1600 MHz */
+ .type = UNIPHIER_CLK_TYPE_FIXED_FACTOR,
+ .output_index = -1,
+ .data.factor = {
+ .parent_name = "ref",
+ .mult = 64,
+ .div = 1,
+ },
+ },
+ {
+ .name = "upll", /* 288 MHz */
+ .type = UNIPHIER_CLK_TYPE_FIXED_FACTOR,
+ .output_index = -1,
+ .data.factor = {
+ .parent_name = "ref",
+ .mult = 288,
+ .div = 25,
+ },
+ },
+ {
+ .name = "a2pll", /* 589.824 MHz */
+ .type = UNIPHIER_CLK_TYPE_FIXED_FACTOR,
+ .output_index = -1,
+ .data.factor = {
+ .parent_name = "upll",
+ .mult = 256,
+ .div = 125,
+ },
+ },
+ {
+ .name = "vpll27a", /* 270 MHz */
+ .type = UNIPHIER_CLK_TYPE_FIXED_FACTOR,
+ .output_index = -1,
+ .data.factor = {
+ .parent_name = "ref",
+ .mult = 270,
+ .div = 25,
+ },
+ },
+ {
+ .name = "uart",
+ .type = UNIPHIER_CLK_TYPE_FIXED_FACTOR,
+ .output_index = -1,
+ .data.factor = {
+ .parent_name = "a2pll",
+ .mult = 1,
+ .div = 8,
+ },
+ },
+ {
+ .name = "i2c",
+ .type = UNIPHIER_CLK_TYPE_FIXED_FACTOR,
+ .output_index = -1,
+ .data.factor = {
+ .parent_name = "spll",
+ .mult = 1,
+ .div = 32,
+ },
+ },
+ UNIPHIER_SLD3_SYS_CLK_SD,
+ UNIPHIER_SLD3_SYS_CLK_STDMAC(8), /* HSC, MIO, RLE */
+ UNIPHIER_PRO4_SYS_CLK_GIO(12), /* Ether, SATA, USB3 */
+ UNIPHIER_PRO4_SYS_CLK_USB3(16, 0),
+ UNIPHIER_PRO4_SYS_CLK_USB3(17, 1),
+ { /* sentinel */ }
+};
+
+const struct uniphier_clk_data uniphier_sld8_sys_clk_data[] = {
+ {
+ .name = "spll", /* 1600 MHz */
+ .type = UNIPHIER_CLK_TYPE_FIXED_FACTOR,
+ .output_index = -1,
+ .data.factor = {
+ .parent_name = "ref",
+ .mult = 64,
+ .div = 1,
+ },
+ },
+ {
+ .name = "upll", /* 288 MHz */
+ .type = UNIPHIER_CLK_TYPE_FIXED_FACTOR,
+ .output_index = -1,
+ .data.factor = {
+ .parent_name = "ref",
+ .mult = 288,
+ .div = 25,
+ },
+ },
+ {
+ .name = "vpll27a", /* 270 MHz */
+ .type = UNIPHIER_CLK_TYPE_FIXED_FACTOR,
+ .output_index = -1,
+ .data.factor = {
+ .parent_name = "ref",
+ .mult = 270,
+ .div = 25,
+ },
+ },
+ {
+ .name = "uart",
+ .type = UNIPHIER_CLK_TYPE_FIXED_FACTOR,
+ .output_index = -1,
+ .data.factor = {
+ .parent_name = "spll",
+ .mult = 1,
+ .div = 20,
+ },
+ },
+ {
+ .name = "i2c",
+ .type = UNIPHIER_CLK_TYPE_FIXED_FACTOR,
+ .output_index = -1,
+ .data.factor = {
+ .parent_name = "spll",
+ .mult = 1,
+ .div = 16,
+ },
+ },
+ UNIPHIER_SLD3_SYS_CLK_SD,
+ {
+ .name = "usb2",
+ .type = UNIPHIER_CLK_TYPE_FIXED_FACTOR,
+ .output_index = -1,
+ .data.factor = {
+ .parent_name = "upll",
+ .mult = 1,
+ .div = 12,
+ },
+ },
+ UNIPHIER_SLD3_SYS_CLK_STDMAC(8), /* Ether, HSC, MIO */
+ { /* sentinel */ }
+};
+
+const struct uniphier_clk_data uniphier_pro5_sys_clk_data[] = {
+ {
+ .name = "spll", /* 2400 MHz */
+ .type = UNIPHIER_CLK_TYPE_FIXED_FACTOR,
+ .output_index = -1,
+ .data.factor = {
+ .parent_name = "ref",
+ .mult = 120,
+ .div = 1,
+ },
+ },
+ {
+ .name = "dapll1", /* 2560 MHz */
+ .type = UNIPHIER_CLK_TYPE_FIXED_FACTOR,
+ .output_index = -1,
+ .data.factor = {
+ .parent_name = "ref",
+ .mult = 128,
+ .div = 1,
+ },
+ },
+ {
+ .name = "dapll2", /* 2949.12 MHz */
+ .type = UNIPHIER_CLK_TYPE_FIXED_FACTOR,
+ .output_index = -1,
+ .data.factor = {
+ .parent_name = "dapll1",
+ .mult = 144,
+ .div = 125,
+ },
+ },
+ {
+ .name = "uart",
+ .type = UNIPHIER_CLK_TYPE_FIXED_FACTOR,
+ .output_index = -1,
+ .data.factor = {
+ .parent_name = "dapll2",
+ .mult = 1,
+ .div = 40,
+ },
+ },
+ UNIPHIER_PRO5_SYS_CLK_I2C,
+ UNIPHIER_PRO5_SYS_CLK_SD,
+ UNIPHIER_SLD3_SYS_CLK_STDMAC(8), /* HSC */
+ UNIPHIER_PRO4_SYS_CLK_GIO(12), /* PCIe, USB3 */
+ UNIPHIER_PRO4_SYS_CLK_USB3(16, 0),
+ UNIPHIER_PRO4_SYS_CLK_USB3(17, 1),
+ { /* sentinel */ }
+};
+
+const struct uniphier_clk_data uniphier_pxs2_sys_clk_data[] = {
+ {
+ .name = "spll", /* 2400 MHz */
+ .type = UNIPHIER_CLK_TYPE_FIXED_FACTOR,
+ .output_index = -1,
+ .data.factor = {
+ .parent_name = "ref",
+ .mult = 96,
+ .div = 1,
+ },
+ },
+ {
+ .name = "uart",
+ .type = UNIPHIER_CLK_TYPE_FIXED_FACTOR,
+ .output_index = -1,
+ .data.factor = {
+ .parent_name = "spll",
+ .mult = 1,
+ .div = 27,
+ },
+ },
+ UNIPHIER_PRO5_SYS_CLK_I2C,
+ UNIPHIER_PRO5_SYS_CLK_SD,
+ UNIPHIER_SLD3_SYS_CLK_STDMAC(8), /* HSC, RLE */
+ /* GIO is always clock-enabled: no function for 0x2104 bit6 */
+ UNIPHIER_PRO4_SYS_CLK_USB3(16, 0),
+ UNIPHIER_PRO4_SYS_CLK_USB3(17, 1),
+ /* The document mentions 0x2104 bit 18, but not functional */
+ UNIPHIER_PXS2_SYS_CLK_USB3PHY(18, 0),
+ UNIPHIER_PXS2_SYS_CLK_USB3PHY(19, 1),
+ { /* sentinel */ }
+};
+
+const struct uniphier_clk_data uniphier_ld11_sys_clk_data[] = {
+ {
+ .name = "spll", /* 2000 MHz */
+ .type = UNIPHIER_CLK_TYPE_FIXED_FACTOR,
+ .output_index = -1,
+ .data.factor = {
+ .parent_name = "ref",
+ .mult = 80,
+ .div = 1,
+ },
+ },
+ {
+ .name = "uart",
+ .type = UNIPHIER_CLK_TYPE_FIXED_FACTOR,
+ .output_index = -1,
+ .data.factor = {
+ .parent_name = "spll",
+ .mult = 1,
+ .div = 34,
+ },
+ },
+ UNIPHIER_LD11_SYS_CLK_I2C,
+ UNIPHIER_LD11_SYS_CLK_STDMAC(8), /* HSC, MIO */
+ {
+ .name = "usb2",
+ .type = UNIPHIER_CLK_TYPE_FIXED_FACTOR,
+ .output_index = -1,
+ .data.factor = {
+ .parent_name = "ref",
+ .mult = 24,
+ .div = 25,
+ },
+ },
+ { /* sentinel */ }
+};
+
+const struct uniphier_clk_data uniphier_ld20_sys_clk_data[] = {
+ {
+ .name = "spll", /* 2000 MHz */
+ .type = UNIPHIER_CLK_TYPE_FIXED_FACTOR,
+ .output_index = -1,
+ .data.factor = {
+ .parent_name = "ref",
+ .mult = 80,
+ .div = 1,
+ },
+ },
+ {
+ .name = "uart",
+ .type = UNIPHIER_CLK_TYPE_FIXED_FACTOR,
+ .output_index = -1,
+ .data.factor = {
+ .parent_name = "spll",
+ .mult = 1,
+ .div = 34,
+ },
+ },
+ UNIPHIER_LD11_SYS_CLK_I2C,
+ UNIPHIER_LD20_SYS_CLK_SD,
+ UNIPHIER_LD11_SYS_CLK_STDMAC(8), /* HSC */
+ /* GIO is always clock-enabled: no function for 0x210c bit5 */
+ {
+ .name = "usb30",
+ .type = UNIPHIER_CLK_TYPE_GATE,
+ .output_index = 16,
+ .data.gate = {
+ .parent_name = NULL,
+ .reg = 0x210c,
+ /*
+ * clock for USB Link is enabled by the logic "OR"
+ * of bit 14 and bit 15. We do not use bit 15 here.
+ */
+ .mask = BIT(14),
+ },
+ },
+ {
+ .name = "usb30phy",
+ .type = UNIPHIER_CLK_TYPE_GATE,
+ .output_index = 18,
+ .data.gate = {
+ .parent_name = NULL,
+ .reg = 0x210c,
+ .mask = BIT(12) | BIT(13),
+ },
+ },
+ { /* sentinel */ }
+};
diff --git a/drivers/clk/uniphier/clk-uniphier.h b/drivers/clk/uniphier/clk-uniphier.h
index 364953c..be4fd92 100644
--- a/drivers/clk/uniphier/clk-uniphier.h
+++ b/drivers/clk/uniphier/clk-uniphier.h
@@ -80,4 +80,17 @@ struct clk_hw *uniphier_clk_register_mux(struct device *dev,
const char *name,
const struct uniphier_clk_mux_data *data);
+extern const struct uniphier_clk_data uniphier_sld3_sys_clk_data[];
+extern const struct uniphier_clk_data uniphier_ld4_sys_clk_data[];
+extern const struct uniphier_clk_data uniphier_pro4_sys_clk_data[];
+extern const struct uniphier_clk_data uniphier_sld8_sys_clk_data[];
+extern const struct uniphier_clk_data uniphier_pro5_sys_clk_data[];
+extern const struct uniphier_clk_data uniphier_pxs2_sys_clk_data[];
+extern const struct uniphier_clk_data uniphier_ld11_sys_clk_data[];
+extern const struct uniphier_clk_data uniphier_ld20_sys_clk_data[];
+extern const struct uniphier_clk_data uniphier_sld3_mio_clk_data[];
+extern const struct uniphier_clk_data uniphier_pro5_mio_clk_data[];
+extern const struct uniphier_clk_data uniphier_ld4_peri_clk_data[];
+extern const struct uniphier_clk_data uniphier_pro4_peri_clk_data[];
+
#endif /* __CLK_UNIPHIER_H__ */
--
1.9.1
Powered by blists - more mailing lists